2014 SQ5 (chassis) with tons of parts for sale!

[JayCar]

Information:

Update 4/7/2205 SOLD Everything listed.

Update 2/13/2025 $5K for everything. Someone bring a trailer and take it all! :-)

Update 5/8/2024: Dropping the price to $8K. Would love to see this go to an AZ member. :-)

I’ve owned this car since it had 9K miles on it, purchased out right in 2015, so I have the clean title in-hand. In 2021 I had injector issues, unbeknownst to me, I thought it was PCV, so I did a PCV job on it, but that didn’t fix it. I ended up running a lean condition on 2 cylinder banks- cracked one piston and obliterated another (lol). You can see the thread in the link below I have about the rebuild. I acquired another engine that I was told had “a slight tapping sound” and figured it was probably top end, so I bought it. Turned out it was a bad crank bearing and I found out after I installed it and started it, I turned it off and it's been sitting since.

I don't have the time to give this project it deserves, my loss is your gain. Pics and info can be found here: https://www.audizine.com/forum/showt...Jay-s-SQ5-(re) You can also find info on my IG: @jayonallcylinders (https://www.instagram.com/jayonallcylinders/)

Please do not ask me if I’ll part with this item, or will I sell this piece, etc.. I don’t have time to finish this project, and I don’t have time to answer “will you part it out” emails. I want it all gone together..

I’m asking $5K for all of it, and this is an absolute steal of a deal. You can reach me at: [email protected] for more info. I’m in Texas (Houston), so you’ll need to bring a trailer to pick it up.

Here’s the info and items for sale:

Items/Parts included in the sale:
• 2014 Audi SQ5, Gray, 93K miles
• 2 sets of wheels, OEM (with tires) and RS6 replica wheels: 285/35/21 x 9.5, ET30, with Michelin Pilot Super Sport (looks amazing and handles great)
• H&R Street Performance Coilovers
• Adjustable control arms
• OEM Suspension is still in the box (comes with it)
• APR Stage 2+ tune
• Currently has a Fluidampr balancer and swappable crank pulley installed – this is included
• APR Supercharger pulley installed
• Brand new, in the box PLM intercooler
• P3 Performance gauge
• Euro head lights (no orange marker). Brand new HID D3S Xenon bulbs, 5500K OEM color. New DRL modules for both headlights (one was weak so I replaced them both)
• New Fog light assemblies with HID bulbs & ballasts
• Euro tail lights w/ Amber turn signals, pinned and coded (via VCDS) to work properly
• 2 sets of injectors, one set has been completely overhauled, new filter baskets and flow matched (documentation to go with it). The other set came out of the 2nd motor.
• New set of spark plugs
• 2 complete oil changes and filters
• Transmission service kit – all fluid, filter & gasket
• Billet transmission mount (new in box)
• Oil extractor. I have no need for this now.
• Additional set of OEM 3.0T valve covers
• New OEM Supercharged Emblems (not aftermarket)

Additional info:
• Every single o-ring and gasket on this engine has been replaced as I anticipated getting it to run.
• You can either pull this motor and replace it with a take out 3.0T, replace the crank and bearings (that’s what I was going to do), or do a 4.0TT swap, which would be killer!
• If you decide to do a 3.0T, there are tons of new items that are transferrable to a new motor
• HPFP housing has been powdercoated gloss black. This is easily transferred to another motor. I also polished the hard fuel lines.
• Vacuum pump housing has been powdercoated gloss black to match, has new gasket, I also polished the screws.
• Valve covers have been sanded, primed, painted and clear coated to match the exterior color. New screws, screw gaskets and valve cover gaskets
• Brake Calipers were removed, sanded, primed, painted and clear coated with new SQ5 vinyl logos. Brake system has been bled, just need to have fluid added since calipers were recently re-installed.
• New Oil pump installed
• New Street Density motor mounts installed
• Supercharger has new fluid and new intercooler bricks
• Top plate has been powdercoated black with the Audi S logo in vinyl

Known issues:
• The same day the first motor let go, the retractable headliner jumped off track, so this will need to be replaced.
• I have a small dent in the passenger door where something fell and hit it while I was working on it. This killed me as it’s the only blemish on the car.
• A few of the wheels have some curb rash

I’m sure there’s something I’m forgetting, but essentially, it’s the entire vehicle, all parts and Audi specific tools associated with it.

You can reach me at: [email protected] for more info. I don't check messages here often, so please email me. I’m in Texas (Houston), so you’ll need to bring a trailer to pick it up, I'm happy to help load it and pack it. Again, I have clean title in hand, ready to sign it over.

One last thing, please do not ask me if I’ll part with this item, or will I sell this piece, etc.. I don’t have time to finish this project, and I don’t have time to answer “will you part it out” emails. I want it all gone together, so I will not part it out. Please don’t ask.




IMG_5035.JPGIMG_5034.jpgIMG_1628.jpgIMG_1630.jpgIMG_1627.jpgIMG_1631.jpgIMG_0938.jpgIMG_5035.JPG

[JayCar]

I'm serisouly surprised no one is jumping on this. I had more offers than I could respond to during Covid, but I guess no one wants a project car now. :-)

[Catracho09]

Airbag from steering wheel?


Sent from my iPhone using Audizine

[spijun]

Airbag from steering wheel?


Sent from my iPhone using Audizine

>>>>>>I will not part it out. Please don’t ask. <<<<<<

[JayCar]

Figured I'd bring this back to the top. Price dropped to $5K.. someone bring a trailer and take it all! :-)

[kooltrix]

is it like 0% chance you'll part it out? or like 10% chance? lol

if someone buys this to part it out... let me know.

[sandspeed]

Why? What do you need?

[JayCar]

=kooltrix;is it like 0% chance you'll part it out? or like 10% chance? lol

if someone buys this to part it out... let me know.

lol 0% chance for me.

I don’t want to deal with removing items, shipping and then being left with the remains. I know the parts are worth more than the sum here, but it’s literally crank and bearings away from a solid running vehicle.

I simply don’t have the time to part and ship and I’d like my garage cleared of it. :-)

[sandspeed]

E-mailed

[Explrths]

I understand there's no part of the car. Sounds like you may have a fee connections to someone who might have some parts. I need head light housings, with clear lenses. Prefer entire set. At minimum, need ballast. 2014 Q5 . Not trying to hijack....good luck with the sale! Wish I was closer id buy it

[sandspeed]

E-mailed again