Pinnacle Performance Ball bearing turbos 60-130 (dragy)

[Jong90]

Thanks PFA Motorsports Sean Civitano for testing these new ball bearing bolt on 4.0T C7/D4 turbos. Run was done on a C7 S6 supporting include 500cc methanol wastegates, fuel system, intake, and tuning. E80 We are still turning up and haven’t made a hit on the more aggressive map yet wanted some real world results the more common builder can execute.

[THCarpenter]

Jon.....as said in the other thread and on FB....the fueling system for this is the is more unique with the E80 mix as its the PFA LPFP, stock HPFP and the Mabo injectors.

this also had some Meth spraying...I cant remember the % if it was W/M or full M

I for one, cannot wait to get them in when I get home, and start to tinker around and break hearts on the streets....I just hope I break hearts and not axles

[Jong90]

I forgot to add 500cc methanol. Yes he’s running upgraded injectors this is just to get the point across. With good fuel what’s obtainable 🍻

[Jong90]

These same results would be obtainable on e40-50 with methanol and a custom tune. 91/93 not a chance.

[THCarpenter]

well.....mama didnt raise no bitch!

lol

again, looking forward to seeing these on HPFP's, E40 mix, and some good 50/50 WMI.

I saw the other screenshot of the higher boost run too....cant wait