OZ ultraleggera hlt 5x112 19x8.5

[Mwweaver5]

Bought these used and turns out the center bore is off from my car.
5x112 19x8.5 ET46
Tires are pretty good as well.
$1500 obo

PM for more info
Located in NY 12520


Sent from my iPhone using Audizine Forum

[snowboardgod]

You know you can get rings for the correct bore right? If you like the wheels they are cheap… 15$ or so


Sent from my iPhone using Tapatalk

[Mwweaver5]

That be awesome but these wheels have a center hub size of 57.06 & my B8 has a center hub of 66.6 so I don’t think you they have adapters going 66.6mm —> 57.07mm.. at least I’ve checked and found nothing


Sent from my iPhone using Audizine Forum

[AeyBeCei]

https://www.ecstuning.com/b-ecs-part...iABEgJ5IfD_BwE

Nvm this wouldn't work ... I just realized the size of the wheel hub is smaller then the size of the hub of the car

[prasamin]

https://www.ecstuning.com/b-ecs-part...iABEgJ5IfD_BwE

You realize the wheel bore is smaller than the hub bore on his car, right? He would need to get the wheels bored out to fit his hub. Rings wouldn't work.

Another option would be to get adapter/spacers that are about 15mm thick, which can reduce the hub from 66.6 to the wheel bore size.

[Mwweaver5]

Exactly & finding someone to bore it has been a struggle.


https://www.ecstuning.com/b-h-and-r-...hoCBA4QAvD_BwE



I’ve found this… seems the smallest I can find for this adapter is 20mm.. do you think 20mm spacers all around would be a bit of overkill on a b8.5 s4??? I’m starting to think it’s best I just sell the wheels. Or keep them and throw them on a B5 in the future. Ridiculous how Audi would go 57.1 up until b7-b8’s then change it back again to 57.1 on newer models.


Sent from my iPhone using Audizine Forum

[08 classic]

For the OZ wheels get the requiered hub rings from tire rack. they can supply you with the oem metal rings. I believe the one you need is 130mm to 66.6. Give them a call.

[Mwweaver5]

For the OZ wheels get the requiered hub rings from tire rack. they can supply you with the oem metal rings. I believe the one you need is 130mm to 66.6. Give them a call.

I sold them! Thanks tho..


Sent from my iPhone using Audizine Forum

[GIACuser]

FYI, you could have had them bored out.

[Audpor911]

Sell them on a VW forum. I think even the S3/RS3 carries this size.

[emrewawa]

OZ wheels all have a center bore of 75mm, and use proprietary ring clipped in center bore adaptors to fit to fit to size.

They look like this, and only TireRack can supply them in America.




Sent from my iPhone using Tapatalk