Audizine - An Automotive Enthusiast Community

Results 1 to 6 of 6
  1. #1
    Active Member One Ring
    Join Date
    Jan 10 2021
    AZ Member #
    581610
    Location
    Detroit

    Fuel line upgrade? e85 safe?

    Guest-only advertisement. Register or Log In now!
    My fuel lines are all rusted at the metal crimps from fuel pump forward. I worry they will just pop one day and would like to upgrade to something. Looking around I can’t seem to find a good fuel line that will hold up to e85 for the long haul. Anyone replace all their lines ? Any tips ? Recommend fuel hose and from where.

  2. #2
    Veteran Member Four Rings vavJETTAw36's Avatar
    Join Date
    Jul 04 2012
    AZ Member #
    96276
    Location
    Woodbridge, VA

    Fuel line upgrade? e85 safe?

    JEGS, Russell, and aeromotive all make various PTFE lined hoses the utilize AN fittings. Braided steel and nylon id use nylon.


    Sent from my iPhone using Tapatalk

  3. #3
    Veteran Member Four Rings
    Join Date
    Aug 04 2013
    AZ Member #
    120269
    Location
    Pennsylvania

    Tons of choices. I used fragola 6000 series

  4. #4
    Veteran Member Four Rings CELison's Avatar
    Join Date
    Feb 23 2010
    AZ Member #
    55053
    Location
    Emmaus Pa

    I use Aeroquip -6.
    B5 S4- K24s, built bottom end, E85 - Gone
    B9 S4- EPL/AWE
    996TT X50 - Marski 700hp

  5. #5
    Active Member One Ring
    Join Date
    Jan 10 2021
    AZ Member #
    581610
    Location
    Detroit

    So what did you do just remove the hoses where there is a crimped connection and run the new line to the proper plastic hose and crimp it?
    For the fuel filter area what did you do to the banjo bushings ? Just remove crimp and slide hose over barb and clamp?

  6. #6
    Veteran Member Four Rings Monty23's Avatar
    Join Date
    Oct 27 2011
    AZ Member #
    83106
    My Garage
    TOYS
    Location
    Philly Suburbs

    Check this out: https://www.audizine.com/forum/showt...1#post11746680

    Quote Originally Posted by Monty23 View Post
    Here is an aftermarket fuel system flow chart and parts list that I put together for people interested in installing an E85 high flowing fuel system. I highly recommend using carbon impregnated PTFE fuel hose like Earls speed seal. It doesn't weep fuel vapors like the rubber lined hoses.

    ***Also, you will not need the entire length of hose I included in the estimate as there is extra so you won't end up short. You can try an order less if you want to estimate the lengths you will actually need.
    ***The parallel setup could also be modified to use a dual inlet FPR, that way you could eliminate the need for am additional Y fitting in the feed lines. Adjust accordingly

    PDFs: https://drive.google.com/file/d/0B3a...ew?usp=sharing





    STK -> Compound Turbo Build Thread
    If you cannot do great things, do small things in a great way.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2025 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.