Oem audi car cover

[S4Corey]

Anyone have the oem indoor or out door cover? Looking for pictures on said units used

[kevin#34]

I have the Audi Sport indoor one, but no picture

[S4Corey]

I have the Audi Sport indoor one, but no picture

Hows the fit
And does your car have a spoiler or is it electric spoiler?

[kevin#34]

fits perfectly, but I have the electronic spoiler, however I tested it also on a TT with fixed wing and (obviously) fits perfectly up to the back window, then it still covers the rear of the car quite well but as expected is a bit too short to cover the exhaust tips (note that it is recommended to not let the cover reach the tips when hot).
Quality of the tissue looks very good to me (of course, considering what I paid it! )

[S4Corey]

fits perfectly, but I have the electronic spoiler, however I tested it also on a TT with fixed wing and (obviously) fits perfectly up to the back window, then it still covers the rear of the car quite well but as expected is a bit too short to cover the exhaust tips (note that it is recommended to not let the cover reach the tips when hot).
Quality of the tissue looks very good to me (of course, considering what I paid it! )

Thats good news
I had speculations as the factory says “will not fit with fixed rear wing”. I have a vw cover for my r32 that supposidly wouldnt fit because the taller bumpers but it fit almost perfectly.

Do you have a picture of the part number or can you get one to share, also if you could possibly get one of how it fits the rear even the you have electric spoiler, would like to gauge how it wraps under the rear bumper

[kevin#34]

part number for TT should be 8S8061205 for four rings logo and 8S8061205A for Audi sport label
with electric spoiler it covers without effort the whole rear valance area including the exhaust tips, unfortunately I don't have any pic right now but I can take it in the next days, if you really need

[Cyttorak]

IMG_1950.jpg
Been looking for a cover myself. Usually look up parts on Audi USA parts, for 2018 at least says the standard coupe cover in discontinued. But this part number is available and was able to find this image based on the part number on eBay. Looks good IMO.


Sent from my iPhone using Audizine Forum

[kevin#34]

there are no cover differences between YM, cover is always the same and fits perfectly an all mk3, just a bit tight (but not so much) on fixed wing models

[Cyttorak]

Turns out there is a difference.

"In our accessory catalog, it only shows an outdoor car cover that fits your TT-RS (ZAW061205K). - can search this for picture on audiusaparts

The indoor ones show option code K8C: TT Coupe and FN0, which is regular TT. Yours has the code of FN1, which is for RS only. "

Turns out this is cheaper. I thought outdoor ones were more expensive but only comes with the rings logo.

I was basically told I would be taking a chance the audi sport cover, 8S8061205A , would not fit my RS.

When you look at the picture of the audi sport branded indoor cover, looks like there is a spoiler of some sort going on at the rear.

Anyways, I've going to go for the indoor one. I will give an update if it fits or not.

[Huey52]

https://www.audiusaparts.com/oem-par...IFJlc3VsdHM%3D

Indoor cover and available part number now only ends with a -A so presumably the "AudiSport" labeled.

[S4Corey]

Thanks everyone. Decided to bite the bullet and get the last available cover with A. Will update once recieved

[777stentQ3]

The AUDI indoor covers are very nice but pricey. Is anyone using a different brand of Indoor car cover that they are happy with?

[kevin#34]

Thanks everyone. Decided to bite the bullet and get the last available cover with A. Will update once recieved

[S4Corey]

That definetly looks like ittl fit with the spoiler

[kevin#34]

it's pulled well down and covers exhaust tips as well (not to do when the engine is hot), as I said we tested it on a TT with fixed wing and it was almost perfect

[BeTTo RS]

That definetly looks like ittl fit with the spoiler

I guess the Audi Performance Parts spoiler won’t fit though, right?

- - - Updated - - -

it's pulled well down and covers exhaust tips as well (not to do when the engine is hot), as I said we tested it on a TT with fixed wing and it was almost perfect

👌🏻

[Cyttorak]

Just got mine in the mail. Fits great, looks great.

IMG_0016.jpg
IMG_0017.jpg


Sent from my iPhone using Audizine Forum

[S4Corey]

Just got mine in the mail. Fits great, looks great.

IMG_0016.jpg
IMG_0017.jpg


Sent from my iPhone using Audizine Forum

Man thats awesome
Im still waiting for mine, dealer states backordered :(

[S4Corey]

Just thought I’d share an update/ definitive input on the cover.

After waiting so long, Audi had cancelled the back order “A” cover (Audi Sport logo) but gave the option for the 4 ring version that still had sources in warehouses. The Audi sport version is obsolete.
So I took what I could get.

Finally verified first hand that in the catologue it says will not fit with spoilers.

Well it fits nice and snug and fully covers the car without being over stretched or anything, even with the 2019 differences in the bumpers and winglets on the rear fixed spoilers

So anyone looking and perhaps being told it wont fit - It will and covers the car 100%

[DocSean]

I just came here to admire your collection my man. Looks like a true enthusiast garage. Props on the srt4.

[S4Corey]

I just came here to admire your collection my man. Looks like a true enthusiast garage. Props on the srt4.

Haha, thanks. The SRT4 is my younger brothers toy. Shows extremely well with rediculas low K on it.