2007 Audi S6 (HIGHLY MODIFIED)

[v8a6]

PRICE DROP TO $11999 CAD !!!!!!!

2007 Audi S6
Over $25000 CAD in modifications
v10 engine 5.2 L (same engine that was essentially used in the Lamborghini Gallardo)
Over 500hp/500tq
Full length JHM custom headers ($10000)
JHM exhaust with HJS high flow cats ($4000)
Forged Alloys 20" forged lightweight wheels ($5000)
RS6 OEM Exclusive alcantara dash Imported from Germany with OEM RS6 black bezel surround ($2000)
H&R coilovers ($2000) lowered
JHM LWCP and JHM intake spacers ($1000)
JHM ECU and TCU tune ($2000)
Carbon trim
OEM sport seats
No test pilots
225k km
$23999 CAD
Located in Toronto, CANADA

[CrazyEights]

GLWS. Whomever buys this will be super lucky to get such a heavily modified example. We will miss you in the C6 S6 community.

[v8a6]

thanks man!

Open to offers to get this beast into a new home :)

[Don Arco]

Long time to talk! Hopefully someone comes to their senses and picks this bad boy up! 1/2 RS6 bumpers that I know of!!


Sent from my iPhone using Audizine Forum

[LakeTahoeQuattr]

Someone will buy this beast. Keep that price high for us v10 owners to set the bar for these awd 10 barrel sedans that are going to salvage yards daily. Post this one on BaT?

I want your car solely for those headers. People dont even know how valuable just having those on a running and tuned, dialed in car is.

If I had your s6, I'd never sell. These are unicorns

[v8a6]

Thanks for the kind words guys !!!

I would keep it if I had more space....but with 5 cars in the driveway, something has got to go :)

[Don Arco]

Thanks for the kind words guys !!!

I would keep it if I had more space....but with 5 cars in the driveway, something has got to go :)

How’s the Porsche?


Sent from my iPhone using Audizine Forum

[v8a6]

LOL...another project car that's taking forever to complete :)

I do what I can, as money allows. I have to have the calipers painted, carbon side skirts and new seatbelts installed, and decals/PPF. Then it is pretty much done.

Some recent pics (in person, the Lizard green is not so bright and harsh as it looks in the pics)





build thread on Rennlist
https://rennlist.com/forums/997-foru...-thread-8.html

[Don Arco]

LOL...another project car that's taking forever to complete :)

I do what I can, as money allows. I have to have the calipers painted, carbon side skirts and new seatbelts installed, and decals/PPF. Then it is pretty much done.

Some recent pics (in person, the Lizard green is not so bright and harsh as it looks in the pics)





build thread on Rennlist
https://rennlist.com/forums/997-foru...-thread-8.html

Absolutely awesome! I’ll check out the thread.


Sent from my iPhone using Audizine Forum

[Revolv0]

Audi Revolution meet at the zine!

Bump

- - - Updated - - -

Audi Revolution meet at the zine!

Bump

[LakeTahoeQuattr]

Just gotta say, ASR & ESP off I have been enjoying awd drifts in 1st gear from a stop today around town. Such a torquey engine! Mind you I am at 5k elevation. V10 ftw!

[v8a6]

PRICE DROP TO $17999 CAD !!!!!

[DA4KNESS]

Any guess at how a US citizen could view/test drive/purchase this car with the borders closed?

[v8a6]

Any guess at how a US citizen could view/test drive/purchase this car with the borders closed?

There was the "Alaska" loophole before, but it seems that has been fixed now.
https://www.ctvnews.ca/canada/canada...aska-1.5045542

I dont think you would be able to get across to see the car. Your best alternative would be to have a Canadian friend check it out for you, and arrange to have it shipped down to you if you purchase.

Under normal circumstance, you could have been to my place in Toronto in just over an hour from Buffalo. Damn COVID!

[v8a6]

The guidelines are listed at the page below, to see if you happen to meet any of them...
https://www.cicnews.com/2020/10/cana...html#gs.j9gkr7

[DA4KNESS]

I know! All this bullshit COVID ruining everything. I would be up there tomorrow to check it out. Good luck with the sale man. I’m sure someone in Canada will grab it.

[v8a6]

Thanks man!

[v8a6]

PRICE DROP TO $14999 CAD !!!!!!!

[LakeTahoeQuattr]

What tire size are you running on those 20s? What's your ET?

[v8a6]

IIRC
275/20/20
20x9 wheels
et50 front
et35 rear (with 15mm spacer)

Rears rubbed the liner at first over large bumps, but not really anymore. It has worn down in the area it used to rub.

Note: the car has H&R coilovers, so its possible they provide a bit more clearance up front than stock suspension

- - - Updated - - -

PRICE DROP TO $12999 CAD

[LakeTahoeQuattr]

God your giving the car away at that price man. So surprised no bites. Why not try bring a trailer auction?

I'm running Mich 275/35/20s and they rub too much. They are now worn out and I need to replace. I am et 48 all corners No clue what to buy. Thinking of trying a 255/35 because not a lot of 265 options out these. Frustrating there is no space on this C6 platform, I have a friend with a b8 that can fit 285/30s on his 20x9s with et 46

[valet]

you need to stop. Every time you drop the price I go, "maybe?" and then I think about the logistics of getting it to northern California. then I think about if I get it to norcal, how do I hide it from the wife.

GLWS

[B. Rock]

you need to stop. Every time you drop the price I go, "maybe?" and then I think about the logistics of getting it to northern California. then I think about if I get it to norcal, how do I hide it from the wife.

GLWS

I'm glad I'm not the only one, especially as my DD (jeep) keeps breaking something every week.

[Quattrocentric]

you need to stop. Every time you drop the price I go, "maybe?" and then I think about the logistics of getting it to northern California. then I think about if I get it to norcal, how do I hide it from the wife.

GLWS

I'm glad I'm not the only one, especially as my DD (jeep) keeps breaking something every week.

Me Three!! Dammit!!!

[LakeTahoeQuattr]

We could go in on it ménage à trois, I want dibs on the headers and dash. Baller

[Quattrocentric]

We could go in on it ménage à trois, I want dibs on the headers and dash. Baller

the two most valuable pieces - we may have to arm wrestle for them, lol

[jbain2]

Probably spend $2-3k to get it imported. Still a steal at the current asking price.


Sent from my iPhone using Audizine

[v8a6]

And price is now dropped to $11999 CAD :)

[sepheroth86]

Still available? I might know someone interested.

[a1dan_87]

If I could get this thing into the US.. God I'd be tempted

[BlackS6]

Is this available still ? We’ve talked before on Audirev

- - - Updated - - -

Is this available still ? We’ve talked before on Audirev

[a1dan_87]

I'm assuming the car is sold?

[a1dan_87]

PM'd owner, car is SOLD