4m 2017 Audi Q7 brake job question

[lil98civi]

Looking to do pads and rotors all around on my 2017 Audi Q7 and have a couple questions for anyone that’s done it. Everything aftermarket I’m looking at say it fits but it says 330mm rears and 350mm fronts and the oem rotors are 375mm front and 350 rears. Had anyone put any aftermarket pads and rotors on their 4m Q7? I’m looking at stop tech rotors from tire rack but I’m thinking they are 350 fronts and 330 rears... is it easier to just got oem with everything? It’s about $1300 from fcp but it’s on backorder. Anyone that’s gone a different route with their brakes on their 4m Q7 let me know cause I’m having the tsb problems with my fronts and it’s out of warranty so don’t want it to happen again if I go oem! Thanks!


Sent from my iPhone using Tapatalk

[Quattro 4 Life]

350/330 is for the first gen Q7 IIRC.

[lil98civi]

350/330 is for the first gen Q7 IIRC.

Are there no aftermarket rotors available for the 4m Q7? Everything aftermarket says it fits 2017 but are 350/330


Sent from my iPhone using Tapatalk

[Quattro 4 Life]

Just looked at ECS and RockAuto, might not be many options. There are some centric ones available on RA.

[winreboot]

Good question! looking at oem how they are cooled at hub hat, I have not see aftermarket do that, so as far as the front goes oem might be the only way. If you find cheaper aftermarket alternative please share.

[lil98civi]

Good question! looking at oem how they are cooled at hub hat, I have not see aftermarket do that, so as far as the front goes oem might be the only way. If you find cheaper aftermarket alternative please share.

Ya I see no front rotors but lots or rear lots aftermarket


Sent from my iPhone using Tapatalk

[cW6mT mKviGLi]

Hello OP,

For aftermarket fronts I believe that Adam's rotors can custom make them for you. I believe they use the OEM rotor and machine to your desired look.

Sent from my SM-G965U using Audizine mobile app