Audizine - An Automotive Enthusiast Community

Results 1 to 14 of 14
  1. #1
    Junior Member Two Rings
    Join Date
    Jul 01 2019
    AZ Member #
    497471
    Location
    San Diego/CA/USA

    Smile Foozy's Audi A6 C6 Build Sheet

    Guest-only advertisement. Register or Log In now!
    Hey y'all

    I wanted to start a thread on my 2011 Audi A6 Car Build

    I currently have 80k miles and 1 year away from paying it off

    Quick story:
    The other day I was driving my car and the a HUD notification indicating "alternator malfunction battery not charging" appeared. Doing some more research and testing the alternator, I find out the the serpentine belt broke. BAD
    So I called around and because it was to expensive I decided to replace it myself.
    Considering the age and mileage of the vehicle I looked up the service intervals on the car and figured I might as well replace a few other parts on the car as preventative maintenance.
    As I working on the vehicle and looking up parts. I realized there is much potential like +100hp clean potential
    So in efforts to create a more aggressive looking spirited, high performance car I've created this build sheet

    Attached to post are some help documents regarding the 3.0TSFI Supercharged Engine. Links are below

    As I purchase the items I will edit this thread post with the price and location of the vendor

    Engine
    New OEM Drive Belt
    New OEM Supercharger Belt
    New OEM Drive Pulley
    New OEM Fuel Filter
    New OEM Double Platinum Spark Plugs

    KM Oil filter
    CTS Turbo Oil Filter Housing
    Unitronic Supercharger Pulley
    Unitronic Stage 2+ with Uniconnect
    Mishimoto Oil Coolers (x2)
    Mishimoto Inline Thermostat
    USP Motorsports Air Intake System
    Custom Carbon Fiber Widebody Kit
    Custom Carbon Fiber Front Splitter
    Custom Rear Wing
    Drilled Brake Rotors and Street Pads
    Ferrada F8-FR8 20X12 w/33 offset (for widebody)
    Falken Azenis FK510 275/30/20 with 97Y (for tire stretch look
    Braum Elite X Komodo Race Seat
    Ceramic Tint with UV Protection

    That's all for now. It may take awhile, I'm not rich nor have a lot of money. As I progress I will be sure to keep all update and notify of any change to the build here and on YouTube as well
    The follow link is to a YouTube I made regarding this built and ideas

    https://www.youtube.com/watch?v=2rWVqA_4_lc&t=152s

    If you would like to support the build please consider becoming a Patreon

    https://www.patreon.com/Lawal

    2011 Audi A6 Service Intervals

    https://www.audiusa.com/content/dam/...-Year-2011.pdf

    Audi 3.0TSFI Supercharger Engine

    http://www.vaglinks.com/vaglinks_com...FSI_Engine.pdf

    If you have any question feel free to email me or pm
    [email protected]
    Attached Images
    Last edited by fawwazlawal; 10-29-2019 at 06:56 AM. Reason: added helpful photos

  2. #2
    Veteran Member Three Rings
    Join Date
    Oct 31 2013
    AZ Member #
    127843
    My Garage
    Land Rover LR3, Harley Dyna Fat Bob, Triumph Speed Triple
    Location
    Washington DC / NoVa

    Subscribed


    Sent from my iPhone using Tapatalk

  3. #3
    Junior Member Two Rings
    Join Date
    Jul 01 2019
    AZ Member #
    497471
    Location
    San Diego/CA/USA

    Preparation

    I got some parts today
    USP Motorsports Air Intake: About $370
    #KM Oil Filter: $8.00 ea
    CTS Turbo Oil Filter Housing: $80
    #Mishimoto Oil Cooler and Inline Thermo(185*F): $450 total
    Fuel Filter: $40
    #TeamMishi
    #USPMotosport

    In order to get the feel and performace I would like for my Audi I must equip it with the right gear. Like would you rather run with #Nike shoes or #Sketchers. Think about it
    Attached Images

  4. #4
    Veteran Member Three Rings a1dan_87's Avatar
    Join Date
    Mar 07 2018
    AZ Member #
    415178
    Location
    Utah

    Looks like USP left out more than the correct air filter when they shipped my intake

    Sent from my PH-1 using Audizine mobile app

  5. #5
    Junior Member Two Rings
    Join Date
    Jul 01 2019
    AZ Member #
    497471
    Location
    San Diego/CA/USA

    Yo funny story about the intake, When I bought it the automated message reported I would get the item in Dec (I bought the piece in 0ct) after calling, they realized that was because a part was not in stock. They found the part and got it delievered in 3 day. When I got it they also had some HARIBO gummy bears in the package

  6. #6
    Veteran Member Three Rings B. Rock's Avatar
    Join Date
    Jul 27 2008
    AZ Member #
    31331
    My Garage
    09 3.0T A6 Avant
    Location
    Denver, CO

    Wow. Patreon donation request on a forum where all of the information you posted above is readily available? Bold move.
    09 A6 Avant 3.0t
    06 E350 4x4 Cummins swapped
    01 WJ rock toy

  7. #7
    Active Member One Ring
    Join Date
    May 26 2008
    AZ Member #
    29201
    Location
    atx

    This dude went from busted drive belt to custom carbon fiber body kit.....

    Sent from my SM-G970U1 using Tapatalk

  8. #8
    Veteran Member Three Rings
    Join Date
    Oct 31 2013
    AZ Member #
    127843
    My Garage
    Land Rover LR3, Harley Dyna Fat Bob, Triumph Speed Triple
    Location
    Washington DC / NoVa

    Quote Originally Posted by jetatx View Post
    This dude went from busted drive belt to custom carbon fiber body kit.....

    Sent from my SM-G970U1 using Tapatalk
    That ^^^^


    Sent from my iPhone using Tapatalk

  9. #9
    Active Member One Ring
    Join Date
    May 26 2008
    AZ Member #
    29201
    Location
    atx

    WIDE BODY mind you ....

    Sent from my SM-G970U1 using Tapatalk

  10. #10
    Junior Member Two Rings
    Join Date
    Jul 01 2019
    AZ Member #
    497471
    Location
    San Diego/CA/USA

    Quote Originally Posted by jetatx View Post
    WIDE BODY mind you ....

    Sent from my SM-G970U1 using Tapatalk
    I'm on the come up

  11. #11
    Active Member One Ring
    Join Date
    May 26 2008
    AZ Member #
    29201
    Location
    atx

    Most likely not happening. Use this as motivation to complete it?

    Sent from my SM-G970U1 using Tapatalk

  12. #12
    Junior Member Two Rings
    Join Date
    Jul 01 2019
    AZ Member #
    497471
    Location
    San Diego/CA/USA

    Quote Originally Posted by jetatx View Post
    Most likely not happening. Use this as motivation to complete it?

    Sent from my SM-G970U1 using Tapatalk
    Ohh I'm so fired up now. Ugh thank you
    [fire]

  13. #13
    Junior Member Two Rings
    Join Date
    Jul 01 2019
    AZ Member #
    497471
    Location
    San Diego/CA/USA

    For those who watched the youtube video. I found out that the real reason for the snapped belt was actually the harmonic pulley

  14. #14
    Junior Member Two Rings
    Join Date
    Jul 01 2019
    AZ Member #
    497471
    Location
    San Diego/CA/USA

    Quick Update I located a AM oil cooler adapter that works and installed Mishimoto 19 row oil coolers with thermostat all in all it works amazingly after a 2 hour drive on highways at speeds between 70mph-100mph the oil temps average about 94 Celsius I also have Motul 5W-40 in the engine add oddly enough it does change the engines exhaust tone compared to the 0w-40 Castro Oil

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2025 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.