Audi A3 Front Lip (Facelift, NON S-Line)

[QuickHandCam]

Does anyone know where I can find a front lip for the A3 facelift, non s-line?

I've been searching everywhere and cannot find anything but s-line facelift lips.

Thanks!

[EROtero]

flea-bay

https://www.ebay.com/itm/Carbon-Fibe...53.m2749.l2649

I order one, should be here in a week or so. I'll post my thoughts when I get it.

[QuickHandCam]

flea-bay

https://www.ebay.com/itm/Carbon-Fibe...53.m2749.l2649

I order one, should be here in a week or so. I'll post my thoughts when I get it.

Ok. Pictures would be great too!

Thanks a lot!

[markn1689]

ecs has one. https://www.youtube.com/watch?v=30bL4SfjoxI

[QuickHandCam]

ecs has one. https://www.youtube.com/watch?v=30bL4SfjoxI

"*For standard bumper pre-facelift vehicles only, will not fit S-Line, S3, or facelift vehicles"
From their website, linked from that video.

[EROtero]

UPDATE!!!

After a long wait (first time seller shipped the lip for S-Line bumper instead), I have received and installed the previously mentioned front lip for post-facelift/non-s-line front bumper. This is an ABS part and not molded carbon as other more expensive ones. The finish is great and consistent. Fabrication is of good to excellent quality. But what surprised me the most was the fit. I expected this not to fit and to do some modifications, but it fits like a glove!!! No gaps anywhere and dead flush at each end with fender arch line. For less than $80 I say its a steal. Even if you don't like the carbon print you can always spray paint black prior to installation. Took me 15 minutes to install, 10 of which were prepping and centering the lip. Here are some pics...

IMG_7976.JPGIMG_7975.JPG58501289069__EED62D3C-8A42-4A02-99BE-CA7A70D35197.JPG58501287369__4431CF26-4588-4E4E-8663-9BAD7C6092A2.JPG

[JepoyA3]

Nice! I've been looking to buy one. Glad you took the chance and it worked out. I'll buy it soon and hopefully it doesn't go out of stock.

[QuickHandCam]

UPDATE!!!

After a long wait (first time seller shipped the lip for S-Line bumper instead), I have received and installed the previously mentioned front lip for post-facelift/non-s-line front bumper. This is an ABS part and not molded carbon as other more expensive ones. The finish is great and consistent. Fabrication is of good to excellent quality. But what surprised me the most was the fit. I expected this not to fit and to do some modifications, but it fits like a glove!!! No gaps anywhere and dead flush at each end with fender arch line. For less than $80 I say its a steal. Even if you don't like the carbon print you can always spray paint black prior to installation. Took me 15 minutes to install, 10 of which were prepping and centering the lip. Here are some pics...

IMG_7976.JPGIMG_7975.JPG58501289069__EED62D3C-8A42-4A02-99BE-CA7A70D35197.JPG58501287369__4431CF26-4588-4E4E-8663-9BAD7C6092A2.JPG

Awesome! Thank you so much! I'll probably buy one soon