Stock S5 Peeler Size and Offset

[tx_revo]

I've been trying to find the stock wheel size of my '13 S5. Everything I've found points to the wheels being 19x9 with a +33 offset. However, looking at my wheels I can tell they are staggered. I don't know if the wheels are the same width front and back with different offsets, or if one pair of wheels is a different. All I know is the tires are the exact same all the way around.

Sorry if this information is somewhere, I just can't seem to find it.

Thanks!

[JJI]

If you have them off it will say size and offset on the inside of the wheel


Sent from my iPhone using Tapatalk

[Mops@Nemesis]

Pics would help.

The S5 Peeler is 19x9 ET33. You could have S4 peelers up front? Those would be 19x8.5 ET43.

[JJI]

Pics would help.

The S5 Peeler is 19x9 ET33. You could have S4 peelers up front? Those would be 19x8.5 ET43.

Mops

I have a S5 cab do you know what the width and offset is ? I have heard a few different things
Thanks in advance IMG_2398.jpg


Sent from my iPhone using Tapatalk

[Mops@Nemesis]

Mops

I have a S5 cab do you know what the width and offset is ? I have heard a few different things
Thanks in advance IMG_2398.jpg


Sent from my iPhone using Tapatalk

Should be 18x8.5 et29 but I’ve not put my own eyes on that exact wheel.


Mops On The Move

[tx_revo]

Pics would help.

The S5 Peeler is 19x9 ET33. You could have S4 peelers up front? Those would be 19x8.5 ET43.

Here is a pic of the front and rear wheel. All 4 tires are 255/35 R19.
[IMG][/IMG]

[Mops@Nemesis]

So are the rear wheels a bit more concave than the front? Any spacers installed currently?

[tx_revo]

Yes the rear wheels are a bit more concave. No spacers, it's all stock to my knowledge.

[delz05]

As mentioned... just remove a wheel and the specs are printed on the back side of each... eliminates the guess work.

[Antique-ace]

All 4 wheels are the same size as follows:

Part#: 8T0601025T (also: 8T0601025CB)
Size: 9J x 19
Rim Width: 9"
Rim Diameter: 19"
Offset: 33mm
Bolt Pattern: 5x112

I just bought 4 new tires two weeks ago on my 2014 S5 with 19" "Peeler" wheels so I can verify this info is correct.

[tx_revo]

I completely agree that all 4 wheels should be the same size and offset, but I can tell without a doubt that the rear wheels are more concave than the front and have less of a gap between the wheel and fender. I guess the only solution is to take the wheels off to find out for sure..

[SixShifter]

as indicated earlier, all four stock peelers for the '13 S5 are exactly the same spec. otherwise, the rotation information found in the owners manual (page 241, fig 179) would open AUDI to major lawsuits if they were to be recommending back-front/front-back rotation of staggered wheels.

[tx_revo]

Well, I just had my suspicions confirmed. Rear wheels are 19x9 et33 and the fronts are 19x8.5 et43.

[Neil F]

Looks like S5, S4 wheels.If you want the fronts pushed out, just get a 10mm spacer

[rockstar143]

Probably someone curbed them or had damage and replaced with another peeler without paying attention to the specs.
OR, they had a friend that wanted that concave look and they split the set.