EURO S3 Recaro Wingbacks (identical to EURO RS4 Wingbacks)

[funkypterodacty]

Identical to EURO RS4 wingbacks minus the "RS4" embossing and the electrical adjusters, these are fully manual. Will bolt into B6/B7 chassis with no modification, and of course any A3 chassis. These are heated with occupancy bladder swapped into the passenger side already for B7 accommodations.

$3500 SOLD

[B7S3wannabi]

Those are sexy.
I am with you on the sportster CSs though. I’m looking for a set for my M.


Sent from my iPhone using Audizine

[funkypterodacty]

Really wanted to keep these but the wife doesn't like sitting in them during long trips, I for one find them very comfortable. I'm hoping the Sportsters are a little more forgiving for her, seeing as they appear to be less "buckety"

[ginch]

What vehicle are these currently in? The problem I see installing these in a 4 door is the mounting location of the seatbelts. The B6/B7 sedan has the seatbelt integrated in the seat where as these don't. Maybe I'm missing something!

[funkypterodacty]

They are in my B7. These install as simply as any other aftermarket seat would.

[Gosser]

Any pics of the seat belt arrangement to the floor pan?

[ginch]

Yeah how did you make the seatbelt work? If you have any pics that would be helpful!

[[email protected]]

Yeah how did you make the seatbelt work? If you have any pics that would be helpful!

Yea interested for pics too..

[itsmatt33]

What vehicle are these currently in? The problem I see installing these in a 4 door is the mounting location of the seatbelts. The B6/B7 sedan has the seatbelt integrated in the seat where as these don't. Maybe I'm missing something!

just run schroth quick fit harnesses.

[[email protected]]

They are in my B7. These install as simply as any other aftermarket seat would.

so how did you deal with seat belt as s3/a3 seatbelts attach to floor mount. A4/S4/RS4 belts attach to within seat assembly? Pics would be helpful as it looks like an S3 is the pic you posted but you said you had these (actual seats?) in you B7.

[ginch]

I've already asked the same question twice. Crickets!!!

I bought a set of these for my last RS4 and ended up selling them to a friend with a MK5 R32 because of the seatbelt situation!

Derek

[funkypterodacty]

There are a few simple methods if you know anyone that can fab, or just buy a seat bracket http://wedgebrackets.com/audi-a4-02-...-brackets.html that has seat belt anchor points. I had a friend make a simple steel flat bar that ran across the two rear seat screw mount locations, which he welded an anchor point to for the factory seat belt to connect to. Thinking back on it, we didn't even need to make a bar as one on the rear left with an anchor point would have sufficed and a spacer on the rear right side to even it out.

[Pyromatic177]

There are a few simple methods if you know anyone that can fab, or just buy a seat bracket http://wedgebrackets.com/audi-a4-02-...-brackets.html that has seat belt anchor points. I had a friend make a simple steel flat bar that ran across the two rear seat screw mount locations, which he welded an anchor point to for the factory seat belt to connect to. Thinking back on it, we didn't even need to make a bar as one on the rear left with an anchor point would have sufficed and a spacer on the rear right side to even it out.

That's what I plan on doing

[itsmatt33]

sportsters are way more buckety than OEM seats just so you know

[BTgolfR]

available?