Revo 18" Wheels Available Soon!

[Shawn@PacificGerman]

RVO18 Wheels Available Soon! Pre-Order Now!

With the success of Revo's 19" wheel sets, they are releasing the same design in 18" as well!


Here are the details:

18 x 8
57.1 Centerbore
et40
21lbs
Ball seat (uses factory wheel bolts)


Developed not only for aesthetics, but with performance and function at the forefront of its design.


OVERVIEW

The 18” cast alloy is a lightweight yet exceptionally strong wheel, designed in-house at Revo HQ and manufactured by OE Manufacturer and Motorsport specialist Rimstock making it a truly British product. Utilizing the low pressure casting process used in the production of Rimstock’s tried-and-tested motorsport wheels, Revo is able to produce a timeless motorsport classic that could perform where it matters most; on the road.

As with all Revo products, performance was a key factor in the design requirements. With an impressive weight of 21lbs the RV018 is one of the lighter 18 x 8 cast wheels available, offering a huge reduction in unsprung mass over a factory wheel. The 10 spoke design not only looks great but is designed to clear your Revo big brake kit and offer more efficient cooling to the brake system than other wheel designs. On top of the performance and aesthetic qualities the RV018 also comes with full TÜV approval.

With a classic motorsport look featuring an embossed Revo logo and branded center cap to compliment the subtle styling, the wheel is available in a choice of 3 color finishes, High Gloss Black, Matte Anthracite, & Matte Bronze, with more to come later.


Pricing

Pricing is $1,328.60 per set of four in 18", send us an email for more information. [email protected]

Also available in 19" at $1,398.60 in a wider range of colors.

[Trap.]

What width and offset for 19"?

[o1turbo30v]

So the RV018 will also be available in a 19"? Are the 019's and 018's really the same wheel? The center on the 018 looks much different.

[Shawn@PacificGerman]

What width and offset for 19"?

19 x 8.5 and available in either a et35 or et45. The et35 are 66.6 hub bore so would need hub rings to center to 57.1 (aka A3 8V fitment) otherwise the et45 are still 57.1 center bore.

So the RV018 will also be available in a 19"? Are the 019's and 018's really the same wheel? The center on the 018 looks much different.

They have been available in 19 for about 3 years now! It is the same design, the 18" center may look different as the wheel is a bit smaller. RV019 are available in the following colors: High Gloss Black, High Gloss Silver, High Gloss Bronze, Matte Anthracite, Gloss Anthracite, Matte Bronze.



And a shot of the Gloss Bronze

[Shawn@PacificGerman]

Now available!

Sets incoming to the US, message or email us to reserve yours!

[Shawn@PacificGerman]

Local to us in Socal? take advantage of our Black Friday Special on Revo Software & Hardware through 12.7.18

Not local to us? Contact your local Revo Dealer ASAP to find out what deals they are offering! Click HERE to go to the dealer locator page.

[apertura]

hello, will the 18's fit the 2018 RS3?

[Shawn@PacificGerman]

hello, will the 18's fit the 2018 RS3?

They should fit with a 10mm spacer, however you have several Revo dealers in Spain that can test fit these for you!

[apertura]

Hello, I've already contacted them, bit they are not sure they'll fit.

My concerns are more towards the calipper clearance, I supposed the ET was enough, standar rims are 19x8 ET 42.

Thanks anyways!