TT RS wheel fitment and info

[ormandj]

We should have a thread for wheels known to fit and specifications of said wheels.

I'll start with some stock information, since I was unable to find it elsewhere. I pulled the wheel off and weighed it an hour ago or so.

Audi (stock BO) 20x9:

Fits: Yes, no modifications needed
ET: 52
Weight: 50.4lbs with stock PZero 255/30R20, which is specified as 23lbs, so 27.4lbs for the wheel (!!!!!)

[Lusky]

Mine weighed more than that so either the wheel or the tire is slightly heavier


Sent from my iPhone using Audizine

[mossback]

27 lbs for the TTRS OEM Forged 20" wheel? That doesn't seem right. The TTS forged 20" wheel is significantly lighter. Even my low pressure cast OEM 19" wheel is a hair lighter than that (although a BBS SX cast 18" wheel is 29 lbs, so one never knows).

Methinks Pirelli may be off on their tire weight spec's!

I don't want to mess up your thread lineage intentions so no response needed and will delete this post in a bit.

.
They maybe forged but they are heavy pigs. I dropped about 6lbs a corner going with my wheel tire combo

[ormandj]

Mine weighed more than that so either the wheel or the tire is slightly heavier


Sent from my iPhone using Audizine

What did yours weigh? You had the P Zeros/20" BO? My tires have around 2100 miles on them.

[Cale262]

I see Tirerack now has wheels listed for the MK3 TT RS.

[chasiu]

is the fitment for wheels on the TTRS different from the TT or TTS other than brake clearance

[Rapture]

I see the the Tire Rack lists the BBS FI R as a fitment with a 38 offset. I wonder if they have tried them on? Must be the Lamborghini wheel. Cool but $$$$$


Rapture

[Lusky]

is the fitment for wheels on the TTRS different from the TT or TTS other than brake clearance

Just brake clearance


Sent from my iPhone using Audizine

[sciblades]

Does anyone know the ET with carbon ceramics?

Sent from my SM-G955U using Tapatalk

[wildtouch83]

Does anyone know the ET with carbon ceramics?

Sent from my SM-G955U using Tapatalk

If I'm not mistaken, when you get the dynamic package w/ the ceramics you automatically get the 20x9 ET52 wheels.

[chasiu]

I see the the Tire Rack lists the BBS FI R as a fitment with a 38 offset. I wonder if they have tried them on? Must be the Lamborghini wheel. Cool but $$$$$


Rapture

What is the width of the wheel though?

[wildtouch83]

What is the width of the wheel though?

20x9

[sciblades]

If I'm not mistaken, when you get the dynamic package w/ the ceramics you automatically get the 20x9 ET52 wheels.

Yes but I want to put a 19 on there so need to find out what will fit

Sent from my SM-G955U using Tapatalk

[Cream]

My new TTRS arrives in about a week. Right now for my current TTRS I have about 4 different VMR wheel sets. I will be trying those out, hoping they will fit

[Mops@Nemesis]

My FS arrived yesterday. They'll be a good option for those that want the best/lightest for less than the basic US forged options.

http://bbs-japan.co.jp/en/products/1422/

My 9.5 ones weight 20.2 pounds.

Untitled by Audiyos, on Flickr

Untitled by Audiyos, on Flickr

[wildtouch83]

Oh my mops! What are the size options with these?

Sent from my SM-G950U1 using Tapatalk

[Mops@Nemesis]

Oh my mops! What are the size options with these?

Sent from my SM-G950U1 using Tapatalk

Click that link to the Japan site

You'll not find them on the US site yet. Mine are the first ones in the US. They arrived to BBS yesterday.

[Chuckster]

Awesome wheel. Might be my Q1 gift to myself.

[Mops@Nemesis]

Awesome wheel. Might be my Q1 gift to myself.

Happy to make that happen 😎 Doesn't get much better. Die-forged goodness.

[ormandj]

Happy to make that happen 😎 Doesn't get much better. Die-forged goodness.

Which model(s) is(are) a confirmed fit with the TT RS without issue, and with what tire size? Brake clearance has been a real issue with these cars.

Also, price in the states?

[Mops@Nemesis]

Which model(s) is(are) a confirmed fit with the TT RS without issue, and with what tire size? Brake clearance has been a real issue with these cars.

Also, price in the states?

The 19x9.5 ET45 pictured below. I actually just got mine and snapped these. Not sure on tire size, but I can check. These list at $5K. The 19x8.5 ET42 would work too, but spacers may be wanted for the correct look. I think I would run 8mm spacers personally.

IMG_7040 by Audiyos, on Flickr

IMG_7033 by Audiyos, on Flickr

IMG_7037 by Audiyos, on Flickr

IMG_7035 by Audiyos, on Flickr

IMG_7028 by Audiyos, on Flickr

IMG_7039 by Audiyos, on Flickr

[Rapture]

Mops, do you carry the FIR’s in the fitment for the TT RS (actually the fronts of the R8) and would you have similar photos to those you show above of them? I’ve been focused on the HRE P101 but also like the look of the FIR’s.


Rapture

[sciblades]

Would those fit over ceramics

Sent from my SM-G955U using Tapatalk

[Mops@Nemesis]

Mops, do you carry the FIR’s in the fitment for the TT RS (actually the fronts of the R8) and would you have similar photos to those you show above of them? I’ve been focused on the HRE P101 but also like the look of the FIR’s.

Rapture

You don't want to pay way more for a lesser wheel? ☺️

Email sent to BBS.

Would those fit over ceramics

Sent from my SM-G955U using Tapatalk

Email sent to BBS.

[S 3]

I have BBS CI-R, 19x9 ET42. They weigh in at 25.3lbs each. Also running 10mm spacers.


Sent from my iPhone using Audizine

[Mops@Nemesis]

Mops, do you carry the FIR’s in the fitment for the TT RS (actually the fronts of the R8) and would you have similar photos to those you show above of them? I’ve been focused on the HRE P101 but also like the look of the FIR’s.

Rapture

BBS....

We do have the 20x9 et35 FI-R in stock but I don’t believe the load capacity is sufficient.
The max front axle load or a R8 or Huracan is about 915 kg. The load for the TT-RS is about 1,050 kg. I don’t know if the FI-R was built to a higher capacity since it was only intended for Audi’s mid-engine cars.
I’ve requested info from Germany. We’ll see what comes back.

Would those fit over ceramics

Sent from my SM-G955U using Tapatalk

Still waiting to hear.

[Lusky]

I’m on 18x9.5 and 275/35’s now



Sent from my iPhone using Audizine

[Mops@Nemesis]

Would those fit over ceramics

Sent from my SM-G955U using Tapatalk

BBS...

Not sure, I don’t have a ceramic profile.
Audi’s website does not have any description of the size of the ceramics… The standard rotors are 370mm… Theoretically, assuming a caliper of similar dimensions, the wheel can handle a 390mm rotor…

[ormandj]

I’m on 18x9.5 and 275/35’s now



Sent from my iPhone using Audizine

Nice! What wheel/tire combo/specs? Let's keep the info coming for people looking for wheel options. How's the handling? I'm about to order some 19x9 ET45 wheels that are ~20lbs each, and go with 255/35R19 tires (lots more options and a half inch more sidewall for street). 9.5" with 265 would be appealing but I'd worry about fitment.

[Lusky]

Nice! What wheel/tire combo/specs? Let's keep the info coming for people looking for wheel options. How's the handling? I'm about to order some 19x9 ET45 wheels that are ~20lbs each, and go with 255/35R19 tires (lots more options and a half inch more sidewall for street). 9.5" with 265 would be appealing but I'd worry about fitment.

TSW Interlagos 18x9.5 et53 275/35-18 RE-71R’s


Sent from my iPhone using Audizine

[Mops@Nemesis]

Poop cell pic, but it's the best thing I have to share. Amazing what shaving 8 pounds per corner does.

IMG_9910 by Audiyos, on Flickr

[Mops@Nemesis]

@Rapture

BBS... Confirmed… the FI-R does not have a sufficient load for the TT-RS.

[Rapture]

@Rapture

BBS... Confirmed… the FI-R does not have a sufficient load for the TT-RS.

Thanks very much, I would hate to make that mistake.

[VMRWheels]

VMR V708 19x8.5 ET38 - Confirmed fit
Audizine member audibmi sent us over some photos of this. V708 19x8.5 ET38 pulled from his previous car and installed on his new TT-RS.
Most of our 19x8.5 ET35 wheels should fit TT-RS just fine

[Sniper260687]

Personally, I think the Niche wheels look good.

[ormandj]

Personally, I think the Niche wheels look good.

What's the specifications on the wheels/tires? Any fitment issues? Looks good.

[Sniper260687]

What's the specifications on the wheels/tires? Any fitment issues? Looks good.

Niche misano m116 19x8.5

Nitto Invo 255/35/19

They also offered this model in 20'' but since im lowered, clearance could of been an issue

[Rapture]

Niche misano m116 19x8.5

Nitto Invo 255/35/19

They also offered this model in 20'' but since im lowered, clearance could of been an issue

Your wheels do look nice.

[Sniper260687]

Your wheels do look nice.

Thank you, waiting on spacers!

Ill post pic when done

[Sal85012]

Thinking of going with 18s or 19” torn on whether 18” are too small for the look, i dont plan on tracking. The 20” are too damn big for this car on shitty roads