Audi RS3 2018 Alloy wheel fitment guide

**IGOTGAME** · 08-30-2017 11:05 AM

https://www.wheel-size.com/size/audi/rs3/2018/

**ljcougar11** · 08-30-2017 05:20 PM

You do realize that that page is for European vehicles, not US? They have different fitment/sizes. (EUDM in heading) The tables for US market are labelled USDM.

**IGOTGAME** · 08-30-2017 05:36 PM

its the same wheel and tire size for the RS3 in Europe and USA

**s14.2nv** · 08-30-2017 08:03 PM

I believe sedan and sportback rs3 have different wheel fitments.

**GordonC** · 08-30-2017 09:29 PM

Originally Posted by IGOTGAME

its the same wheel and tire size for the RS3 in Europe and USA

No, that web site definitely has the WRONG wheel sizes specified - there are no 20" options in the USA, and the 19" sizes have incorrect offsets. That site says
235/35ZR19 91Y 8Jx19 ET49
255/30ZR19 91Y 8.5Jx19 ET53

The rear 19"x8" wheels are actually ET42, not 49, and the front 19"x8.5" are actually ET46, not 53.

**IGOTGAME** · 08-31-2017 06:03 AM

That website is 100% correct http://www.ebay.com/itm/original-Aud...53.m1438.l2649 If you look at the website it does say: Heads up! Highlighted items are for OEM wheels, the rest are replacement options 20' would be replacement options

**IGOTGAME** · 08-31-2017 06:18 AM

Received this in the Audi forums.... The biggest problem is not offset, that is only part of the problem. Biggest problem is finding rims that will clear the brakes (not the diameter), I have tried 3 different 19" wheels and non was ok. Relationship between the surface of the hub (actual mounting) and the distance the brake callipers protrude makes it very hard to find something other then OEM until Tire Rack or someone else comes up with some solutions

**GordonC** · 08-31-2017 07:41 AM

Originally Posted by IGOTGAME

That website is 100% correct http://www.ebay.com/itm/original-Aud...53.m1438.l2649 If you look at the website it does say: Heads up! Highlighted items are for OEM wheels, the rest are replacement options 20' would be replacement options

OK, you must be right, and the offset numbers imprinted on the wheels of my RS3 sitting in my garage are incorrect.

Look newbie, you can believe some random website all you want, I'll choose to believe what was actually delivered on my car and has been reported over and over by other actual RS3 owners in North America as well. It does look pretty stupid to insist on the wrong numbers from the random website when actual owners are telling you the real numbers, though. Go ahead and buy wheels based on those figures if you like.

**IGOTGAME** · 08-31-2017 08:01 AM

I'm sorry you are right ...my bad. BBS of america told me that those were the offsets and they were wrong ..I had to correct them lol

**Mops@Nemesis** · 09-15-2017 06:33 PM

FYI... BBS finally received caliper drawings and have posted all options.

http://www.bbs-usa.com/application_guide/#/index

**Grexx** · 09-15-2017 07:31 PM

Originally Posted by Mops@SupremePower

FYI... BBS finally received caliper drawings and have posted all options.

http://www.bbs-usa.com/application_guide/#/index

Thank you for the info..been waiting for this for awhile now. CI-R will be my next wheel for this car.

**WAF** · 09-16-2017 06:49 AM

Originally Posted by Mops@SupremePower

FYI... BBS finally received caliper drawings and have posted all options.

http://www.bbs-usa.com/application_guide/#/index

List states Non ceramic I didn't think the od of the ceramic brakes were different between the two?

Lol wow i couldn't believe the two rims i like are 30.1lbs and 28.1, fat piglets ill wait for something else not my cup of tea. One is an ET32 compared to ET46 of the other rim seems aggressive from what ive been seeing that works. But BBS has been around a long time

**keninblaine** · 09-16-2017 09:41 AM

Originally Posted by WAF

List states Non ceramic I didn't think the od of the ceramic brakes were different between the two?

Lol wow i couldn't believe the two rims i like are 30.1lbs and 28.1, fat piglets ill wait for something else not my cup of tea. One is an ET32 compared to ET46 of the other rim seems aggressive from what ive been seeing that works. But BBS has been around a long time

Agree. Sounds far too aggressive to me.

**Grexx** · 09-16-2017 12:16 PM

Originally Posted by WAF

List states Non ceramic I didn't think the od of the ceramic brakes were different between the two?

Lol wow i couldn't believe the two rims i like are 30.1lbs and 28.1, fat piglets ill wait for something else not my cup of tea. One is an ET32 compared to ET46 of the other rim seems aggressive from what ive been seeing that works. But BBS has been around a long time

Yup, you get what you pay for when it comes to BBS. But 30lbs is abit on the porky side. I don't mind spending $250 more to get 5lbs less plus you get a flowform wheels. The CI-R imo looks awesome plus its not overly expensive compared to their Forged wheels.

**WAF** · 09-16-2017 05:42 PM

Originally Posted by Grexx

Yup, you get what you pay for when it comes to BBS. But 30lbs is abit on the porky side. I don't mind spending $250 more to get 5lbs less plus you get a flowform wheels. The CI-R imo looks awesome plus its not overly expensive compared to their Forged wheels.

Yah but theres alot of cheaper options that are flow formed for the price and less weight. All to their own BBS has their die hard fans that will never sway from them. When i've looked into them in the past it was he same thing heavy and expensive. As i mention all to their own just not for me.

**keninblaine** · 09-16-2017 05:55 PM

Originally Posted by WAF

Yah but theres alot of cheaper options that are flow formed for the price and less weight. All to their own BBS has their die hard fans that will never sway from them. When i've looked into them in the past it was he same thing heavy and expensive. As i mention all to their own just not for me.

Agree. I always thought the point of more expensive forged wheels was their ability to provide lower weight without sacrificing strength.

**DQBRS3** · 09-18-2017 06:58 AM

I have sports plus package but want to put 18s on to take the edge off the fixed sports suspension. Can anyone confirm this is / isn't an option given the ceramic brakes?

**lowroad** · 10-13-2017 09:40 AM

Originally Posted by DQBRS3

I have sports plus package but want to put 18s on to take the edge off the fixed sports suspension. Can anyone confirm this is / isn't an option given the ceramic brakes?

Anyone know what wheels will fit the ceramic brakes yet?

Neuspeed has the RSe102 listed for RS3, but they haven't confirmed ceramic brake fitment. Those would be nice at 20lbs each in 19x8.5

**DQBRS3** · 10-13-2017 10:03 AM

Originally Posted by lowroad

Anyone know what wheels will fit the ceramic brakes yet?

I've asked around and haven't gotten a clear answer. I'm thinking at this point it will be easier to confirm if the ceramic setup is the same size as the steel (which I'm beginning to think is the case; same 8piston calipers / 370mm rotors).

**Mops@Nemesis** · 10-13-2017 05:46 PM

My FS arrived yesterday. They'll be a good option for those that want the best/lightest for less than the basic US forged options.

http://bbs-japan.co.jp/en/products/1422/

Untitled by Audiyos, on Flickr

**gaspam** · 10-14-2017 07:57 AM

Originally Posted by Mops@SupremePower

My FS arrived yesterday. They'll be a good option for those that want the best/lightest for less than the basic US forged options.

http://bbs-japan.co.jp/en/products/1422/

Untitled by Audiyos, on Flickr

those will look really good on a nardo rs3 :)

**Mops@Nemesis** · 10-14-2017 11:54 AM

Originally Posted by gaspam

those will look really good on a nardo rs3 :)

They would!! 😎 I'd love to see the matte black ones on a Nardo with BO.

**steve111b** · 10-15-2017 01:39 PM

[QUOTE=lowroad;12725140]Anyone know what wheels will fit the ceramic brakes yet?

No 18" wheels that I know about. I contacted BBS and they do not plan to offer any 18" wheels until they find out the size of the rotor. If the rotor is 380 mm it is possible to make an 18" wheel fit, any bigger - no. Fastco/Replika scanned an RS3 and I waited a couple of weeks for the results to appear on their web page. It looks like there are a lot of options, but when contacted they told us that Audi recommends a 19" wheel with ceramic brakes. The dealer who will place my order wants a direct fit which means only one of the offered wheels is going to work. Unless I hear some new information I will order 19" x 8.0 from Replika in a few days. If the rotors are bigger than 370mm the wheels may not fit. I will try and find out if Fastco have scanned a ceramic brake car.

**Mops@Nemesis** · 10-16-2017 06:10 PM

Mine arrived today, and just snapped :)

IMG_7040 by Audiyos, on Flickr

IMG_7033 by Audiyos, on Flickr

IMG_7037 by Audiyos, on Flickr

IMG_7035 by Audiyos, on Flickr

IMG_7028 by Audiyos, on Flickr

IMG_7039 by Audiyos, on Flickr

**shivaswrath** · 10-16-2017 06:18 PM

Originally Posted by Mops@SupremePower

Mine arrived today, and just snapped :)

IMG_7040 by Audiyos, on Flickr

IMG_7033 by Audiyos, on Flickr

IMG_7037 by Audiyos, on Flickr

IMG_7035 by Audiyos, on Flickr

IMG_7028 by Audiyos, on Flickr

IMG_7039 by Audiyos, on Flickr

Mops those fit RS3s? And here I had you looking at HREs for me.

Anything in 19x9? Non ceramic of course...

**Mops@Nemesis** · 10-17-2017 06:51 AM

Originally Posted by shivaswrath

Mops those fit RS3s? And here I had you looking at HREs for me.

Anything in 19x9? Non ceramic of course...

Ha! Yea, these do and the 19x8.5 ET42 optimally. These 9.5 ET45 could be a bit wide, but they clear the brakes just fine.

**shivaswrath** · 10-17-2017 08:22 AM

Originally Posted by Mops@SupremePower

Ha! Yea, these do and the 19x8.5 ET42 optimally. These 9.5 ET45 could be a bit wide, but they clear the brakes just fine.

If you can PM me a quote for these as well then...8.5 etc 42 all around will work?

**Mops@Nemesis** · 10-17-2017 09:49 AM

Originally Posted by shivaswrath

If you can PM me a quote for these as well then...8.5 etc 42 all around will work?

Yea, that is the correct fit. On it 👍🏼

**thebc** · 10-17-2017 10:02 AM

Originally Posted by Mops@SupremePower

Mine arrived today, and just snapped :)

IMG_7040 by Audiyos, on Flickr

IMG_7033 by Audiyos, on Flickr

IMG_7037 by Audiyos, on Flickr

IMG_7035 by Audiyos, on Flickr

IMG_7028 by Audiyos, on Flickr

IMG_7039 by Audiyos, on Flickr

Pricing please to 02021. You people are making me poor. 19x8.5s.

Sent from my iPhone using Tapatalk

**shivaswrath** · 10-17-2017 03:22 PM

I know my wife is going to F'in divorce me. Thanks Mops for quick quote...one of the most responsive vendors on here!!

**Mops@Nemesis** · 10-17-2017 07:13 PM

Originally Posted by thebc

Pricing please to 02021. You people are making me poor. 19x8.5s.

Sent from my iPhone using Tapatalk

HA! It's okay to want the best of the best.

Originally Posted by shivaswrath

I know my wife is going to F'in divorce me. Thanks Mops for quick quote...one of the most responsive vendors on here!!

Glad to assist! Sorry for the delays today. I was out of the office trying to manage my day job, Supreme and wheel installs on the S4 and SQ. Did I mention that already? My head has spun all day.

IMG_9910 by Audiyos, on Flickr

**NardoRS3** · 10-17-2017 07:39 PM

Does anyone happen to know if 19x8 ET49, 5x112, 57.1CB would clear the front brakes? Looking at a set of OEM S3 wheels for winter and hoping that'll work!

**CJMRS3** · 10-19-2017 06:32 PM

[QUOTE=steve111b;12728501]

Originally Posted by lowroad

Anyone know what wheels will fit the ceramic brakes yet?

No 18" wheels that I know about. I contacted BBS and they do not plan to offer any 18" wheels until they find out the size of the rotor. If the rotor is 380 mm it is possible to make an 18" wheel fit, any bigger - no. Fastco/Replika scanned an RS3 and I waited a couple of weeks for the results to appear on their web page. It looks like there are a lot of options, but when contacted they told us that Audi recommends a 19" wheel with ceramic brakes. The dealer who will place my order wants a direct fit which means only one of the offered wheels is going to work. Unless I hear some new information I will order 19" x 8.0 from Replika in a few days. If the rotors are bigger than 370mm the wheels may not fit. I will try and find out if Fastco have scanned a ceramic brake car.

Steve, did you confirm/order 19" through Replika? Initially I was after 18" Replikas with PA4's but a 19" set is only $300 more, so now I'm looking at 19x8.5 peelers. Was wondering if anyone had additional insight or actual installation of Replikas on their RS3

**Ethernaut05** · 10-20-2017 05:00 AM

Originally Posted by Mops@SupremePower

They would!!

I'd love to see the matte black ones on a Nardo with BO.

Lets make that happen... Cap’n. But 18s. For the ❄️

Sent from my iPhone using Tapatalk

**brotherssavage** · 10-20-2017 05:56 AM

Originally Posted by Mops@SupremePower

Ha! Yea, these do and the 19x8.5 ET42 optimally. These 9.5 ET45 could be a bit wide, but they clear the brakes just fine.

Could you PM me please a quote for these as well to 07834.

**Mops@Nemesis** · 10-20-2017 07:36 AM

Originally Posted by brotherssavage

Could you PM me please a quote for these as well to 07834.

Certainly 👍🏼

**steve111b** · 10-20-2017 11:22 AM

Steve, did you confirm/order 19" through Replika? Initially I was after 18" Replikas with PA4's but a 19" set is only $300 more, so now I'm looking at 19x8.5 peelers. Was wondering if anyone had additional insight or actual installation of Replikas on their RS3[/QUOTE]

I have spoken with Fastco/Replika and it is my understanding that any wheels are a test fit for ceramic brakes. They do not confirm a direct fit with ceramic brakes, spacers may be needed. If you have iron rotors there will be a different fitment and I have no info on that.

**Skyler@Achtuning** · 10-20-2017 11:23 AM

We had a chance for a test fit on a local RS3 the other day and have a few Hartmann Wheel options in 19". Most of our choices are 19x8.5" ET38 which will work with 235/35-19 all the way around, these specs would likely be too aggressive for those looking to run a 255/30-19 in front though. For a high offset RS3 fitment the Hartmann HR8-GS:M in 19x8.5" ET47 is the our only option and will work with 255/30-19s on all 4 corners. Hartmann Wheels accept the OEM lug bolts and can use specific OEM centercaps as well. They are TPMS compatible for those with in-wheel TPMS sensors.

Here is what we have available for the RS3:
HRS6-091 19x8.5" ET38

HRS6-204-GS 19x8.5" ET38

HRS6-204-MA 19x8.5" ET38

HTT-256-GS 19x8.5" ET38

HTT-256-MA:M 19x8.5" ET38

HLP-410-GS:M 19x8.5" ET38

HR8-GA:M 19x8.0" ET35

HR8-GS:M 19x8.5" ET38 and 19x8.5" ET47

Here is how the 19x8.5" ET38 fits with 235/35-19 Sottozeros

And on 235/35-19 DWS06