TSW Bathurst vs. Forgestar CF10

[hmuller]

I looking into some new wheels size 20x9.0 ET35 for my MY16 (C7.5) S6. Right now I'm leaning towards the TSW Bathurst or Forgestar CF10. Does anyone have either wheel and could make a recommendation?

[Sd76]

I was looking at both and ended up with the Bathurst at 21x10.5 all around with et 32 for my 16'a7. NO spacers needed. Fits amazing looks amazing couldn't be happier with them. I believe they were even cheaper then the cf10's. Here a pic for you.


Sent from my iPhone using Tapatalk

[bonafyd]

They're both nice wheels.. i see a lot of Audis with the bathurst and that can be good or bad depending on who you ask.
I tend to stray away from what the masses do but the choice is obviously yours and you can't go wrong Aesthetic wise with either wheel.

[Brooklyn]

Bathurst. I have yet to see an Audi on the road with that specific wheel, and you're in a pretty rarely sighted car as it is.

[Beezer14]

I was looking at both and ended up with the Bathurst at 21x10.5 all around with et 32 for my 16'a7. NO spacers needed. Fits amazing looks amazing couldn't be happier with them. I believe they were even cheaper then the cf10's. Here a pic for you.


Sent from my iPhone using Tapatalk

Looks amazing. What size tires are you running. This are the leading candidates for my summer set.


Sent from my iPhone using Tapatalk

[Sd76]

Looks amazing. What size tires are you running. This are the leading candidates for my summer set.


Sent from my iPhone using Tapatalk

Thanks. I believe they are 275/30/21


Sent from my iPhone using Tapatalk

[q5 dave]

sorry not a C7 but I'll whore a pic




I'm really happy with my CF10's. quality wheel and look great! 21x9 et19 gloss gunmetal

[hmuller]

Thanks for the recommendations. I looked a little closer at the TSW Bathursts and they don't come up for the MY16 S6 on the TSW wheel configurator. On Amazon/eBay I saw the 20x9 ET 35 with a 72mm bore. Do they also come with a 66.6 mm bore or would I need hub centric rings?

[Sd76]

Thanks for the recommendations. I looked a little closer at the TSW Bathursts and they don't come up for the MY16 S6 on the TSW wheel configurator. On Amazon/eBay I saw the 20x9 ET 35 with a 72mm bore. Do they also come with a 66.6 mm bore or would I need hub centric rings?

For some reason they don't. My 16' a7 wasn't on there either but they fit perfectly. Ask " tireguy" in here he knows all!!!!


Sent from my iPhone using Tapatalk

[hmuller]

For some reason they don't. My 16' a7 wasn't on there either but they fit perfectly. Ask " tireguy" in here he knows all!!!!


Sent from my iPhone using Tapatalk

Did you use hub centric rings on yours?

[Sd76]

Did you use hub centric rings on yours?

No. just put them right on.


Sent from my iPhone using Tapatalk

[Avned]

I love my bathurst. Great price and weight.

[hmuller]

I love my bathurst. Great price and weight.

Nice picture. In your build thread your wheels are gunmetal. Did you change color? Also, since the bore on the wheels is a little larger than our hubs, did you use hub centric rings?

[Djpeaksd]

I love my bathurst. Great price and weight.

Lets see a full car pic! I didn't know you changed them to gold. Looks awesome.

[Djpeaksd]

Bathurst on my S7.

[luv2sleep]

sorry not a C7 but I'll whore a pic




I'm really happy with my CF10's. quality wheel and look great! 21x9 et19 gloss gunmetal

That looks niiiiice!!! Is that lowered? If so, Vag-Com or lowering springs?

[q5 dave]

That looks niiiiice!!! Is that lowered? If so, Vag-Com or lowering springs?

thanks! yes it lowered on KW HAS

[S-Fore]

I'm going to side with Dave here....FORGESTAR > TSW in my experience. So many more options too. Yeah you may have to wait a bit for them, but that's life.

[CanuckRS]

Where did the TSW buyers get their wheels? I've contacted a few dealers and either i get no response or they are out of stock.

[rbravo]

I ordered my TSW's through "Tireguy" at America's Tire here in SoCal.

[Sd76]

I ordered my TSW's through "Tireguy" at America's Tire here in SoCal.

Same


Sent from my iPhone using Tapatalk

[CanuckRS]

thanks for the info, will check them out.

anyone running 20 size? i'd rather go this route for summers, keeps the weight down as well.

also, what tire sizes are you using. thinking about going 295/30/20 but with an ET of 25 in 20", it'll stick out 20m more which is a bit much i think. might keep it at 285/30/20

[hmuller]

Where did the TSW buyers get their wheels? I've contacted a few dealers and either i get no response or they are out of stock.

Just ordered my TSW Bathursts from Sean at ModBargains. Great to deal with and cheapest price I could find. Wheels should ship early next week.

[saxon]

have you looked into the rennmotorsport rs-71? with the sale going on right now its very tempting to pick up a flow forged wheel that weighs 22lbs for under a grand

[hmuller]

have you looked into the rennmotorsport rs-71? with the sale going on right now its very tempting to pick up a flow forged wheel that weighs 22lbs for under a grand

No, missed that one.

[cobrario]

has anyone used the 20x9 +35 TSW Bathurst on their RS7? I'm about to order bu I'm a little worried the 35MM offset will tuck too much under the wheel well and I want to be sure they will clear the caliper.

[Gonzoe11]

Not a great offset for the RS7. I ran 20'x9.5" et 34 on my S7 and it was a terrible fit. WAY too tucked in. I used a 12mm spacer to get a perfectly flush fit.

[CanuckRS]

has anyone used the 20x9 +35 TSW Bathurst on their RS7? I'm about to order bu I'm a little worried the 35MM offset will tuck too much under the wheel well and I want to be sure they will clear the caliper.

I'm looking at 21x10.5 et32 which seems to be a nice fit, about 8mm pushed out vs stock.

[Djpeaksd]

I'm looking at 21x10.5 et32 which seems to be a nice fit, about 8mm pushed out vs stock.

Yeah the +32 offset on my 21 wheels seems to be perfect imho!

[flyfishing]

i'm thinking of getting these. what did you all pay for the bathurst wheels?