PURE Carbon Front Spoiler For Audi A3 / S3 8V: NOW AVAILABLE!

**EmmanueleDesign** · 06-29-2016 02:52 PM

After months of anticipation, we are pleased to release the PURE Carbon front splitter for the Audi A3 & S3 (8V). This product is a direct fit and installs over the factory spoiler. Installation can be completed in one's driveway and typically takes less than five minutes. All required hardware for installation is included. Features include:

- Simple bolt-on installation

- Made of real carbon fiber finished in a glossy UV-resistant clear coat

- Improved aesthetics

This product fits:

- Audi S3 Sedan (8V)

- Audi A3 Prestige Sedan (8V)

- Audi A3 S-Line Sedan (8V)

Click here for pricing and to order!

**MerlinS3** · 07-10-2016 11:17 AM

Thomas, That splitter looks amazing!
I may have to pick one up soon

**EmmanueleDesign** · 07-10-2016 11:40 AM

Originally Posted by VeeDubb

Thomas, That splitter looks amazing!
I may have to pick one up soon

Let us know Corbin, we can install it for you as well!

**MerlinS3** · 07-12-2016 10:33 AM

Originally Posted by EmmanueleDesign

Let us know Corbin, we can install it for you as well!

Sounds Good Thomas!
When will the rear diffusers be back in stock?

**S3Mike** · 07-24-2016 10:49 AM

Hey Thomas, does this just slide over the silver splitter? Or do you gotta pop the silver splitter off?

**16s3pang** · 07-24-2016 11:46 AM

Originally Posted by S3Mike

Hey Thomas, does this just slide over the silver splitter? Or do you gotta pop the silver splitter off?

+1

**STICKY RICE** · 07-24-2016 02:00 PM

I thought you had to pop the silver splitter off and then Thomas threw my car up on the lift and the lip slid right on. The install was 10 minutes, if that. Extremely simple. Couldn't get any easier, lol.

**S3Mike** · 07-24-2016 02:44 PM

Any tricks on removing the silver splitter?

**STICKY RICE** · 07-24-2016 02:47 PM

You don't have to remove it. The PURE lip slides right over it.

**robertsonsylee** · 07-25-2016 12:27 PM

Looks like the edge of the spoiler is touching the lower part of the bumper, and not under the bumper. I assume this will cause rubbing?

If one decides to remove the spoiler, are scratches on the lower bumper visible?

Sent from my iPhone using Tapatalk

**EmmanueleDesign** · 07-25-2016 12:31 PM

Originally Posted by S3Mike

Hey Thomas, does this just slide over the silver splitter? Or do you gotta pop the silver splitter off?

This slides over the silver splitter.

**EmmanueleDesign** · 07-25-2016 12:31 PM

Originally Posted by robertsonsylee

Looks like the edge of the spoiler is touching the lower part of the bumper, and not under the bumper. I assume this will cause rubbing?

If one decides to remove the spoiler, are scratches on the lower bumper visible?

Sent from my iPhone using Tapatalk

No, the spoiler is firmly mounted once installed so there is no rubbing or movement.

**freire1** · 07-29-2016 02:34 AM

Originally Posted by EmmanueleDesign

In stock and ready to ship!

http://www.emmanueledesign.com/colle...nt=23853763463

Will the rear trunk spoiler be in stock soon?

Sent from my iPhone using Tapatalk

**Audi_Salesman** · 08-03-2016 07:53 PM

I'm looking to get the the diffuser, front,and rear spoiler together any ideas of a in stock date?

Sent from my iPhone using Tapatalk

**deadbolt** · 08-04-2016 05:22 AM

Just placed my order can't wait to get this bad boy on

**MerlinS3** · 08-08-2016 09:35 AM

Originally Posted by deadbolt

Just placed my order can't wait to get this bad boy on

Had mine installed on Saturday and Goddamn do I love it! The quality and finish are second to none!
Now I am waiting on the trunk fin

**n8vs3** · 08-08-2016 11:21 AM

The website states its all sold out?

Sent from my Nexus 6 using Tapatalk

**MerlinS3** · 08-08-2016 12:05 PM

Originally Posted by n8vs3

The website states its all sold out?

Sent from my Nexus 6 using Tapatalk

Shoot them a call, That's what I did on Saturday then just headed up to the shop!

**markn1689** · 08-08-2016 12:39 PM

does it require drilling holes into the bumper cover?

**MerlinS3** · 08-08-2016 12:52 PM

Originally Posted by markn1689

does it require drilling holes into the bumper cover?

Not too sure, if so it was on the under panel. Thomas installed if for me while I waited there, took 20 minutes or so.
visually I didn't see any screws into the bumper

**STICKY RICE** · 08-08-2016 05:49 PM

Originally Posted by markn1689

does it require drilling holes into the bumper cover?

No drilling required. Slides right in and uses OEM mounting holes iirc. Very simple and clean install.

**Fabre80** · 08-09-2016 07:44 AM

What wheels are those?

Sent from my iPhone using Audizine mobile app

**deadbolt** · 08-09-2016 12:34 PM

Originally Posted by STICKY RICE

No drilling required. Slides right in and uses OEM mounting holes iirc. Very simple and clean install.

You didn't have to remove the oem splitter? Did you?

**STICKY RICE** · 08-09-2016 04:14 PM

Originally Posted by Fabre80

What wheels are those?

Sent from my iPhone using Audizine mobile app

Neuspeed RSE102's in Hyper Black

Originally Posted by deadbolt

You didn't have to remove the oem splitter? Did you?

Nope.

**gamegenie** · 08-09-2016 04:18 PM

I want to see this spoiler on a regular A3, not a S-Line/S3 body.

How does that look?

**deadbolt** · 08-11-2016 05:34 AM

Just to update everyone. I received and installed my spoiler yesterday. It definitely is a snug fit into the splitter. You have to use a little elbow grease to get it all the way in there. The kit comes with a few screws that you will need to drill into the bumper to properly secure it.

**STICKY RICE** · 08-11-2016 08:04 AM

Oops. For some reason when I read the first post asking about drilling I was thinking of something else.

End of the day, it's still a super simple install for those worried. Really hard to screw it up.

**Audi_Salesman** · 09-01-2016 11:45 AM

Already ordered one just waiting for it

Sent from my iPhone using Tapatalk

**markn1689** · 09-01-2016 12:21 PM

what is involved in the installation? drilling into the carbon fiber? is it stick on? let us know, thanks

**interestingjim** · 09-01-2016 12:38 PM

Originally Posted by gamegenie

I want to see this spoiler on a regular A3, not a S-Line/S3 body.

How does that look?

I 2nd this

**16s3pang** · 09-01-2016 03:19 PM

Any way to get a group buy going on this spoiler lip?

**freire1** · 09-01-2016 07:57 PM

^yup! Or Labor Day deals? Looking for that rear cf lip spoiler too?

Sent from my iPhone using Tapatalk

**Zonian22** · 09-03-2016 05:34 PM

^I'm in for a Group Buy or Labor Day Deal!^

**EmmanueleDesign** · 09-21-2016 10:45 AM

Back in stock and ready to ship!

http://www.emmanueledesign.com/colle...nt=23853763463

**interestingjim** · 09-21-2016 11:15 AM

Originally Posted by EmmanueleDesign

Back in stock and ready to ship!

http://www.emmanueledesign.com/colle...nt=23853763463

Do you guys have one for a non-S-line A3? Or will you be getting one soon?

**EmmanueleDesign** · 09-21-2016 01:19 PM

Originally Posted by interestingjim

Do you guys have one for a non-S-line A3? Or will you be getting one soon?

Unfortunately we don't have anything available at this time.

**Domokun** · 09-28-2016 11:49 AM

Originally Posted by EmmanueleDesign

Unfortunately we don't have anything available at this time.

Waiting for this to happen!

**S3owner** · 04-08-2018 05:14 PM

Is there any plan to put these back in stock? or we should shop elsewhere?

**donot521** · 04-09-2018 07:48 AM

Awaiting patiently for the rear trunk spoiler to back in stock too

**EmmanueleDesign** · 04-10-2018 06:59 AM

Originally Posted by S3owner

Is there any plan to put these back in stock? or we should shop elsewhere?

Originally Posted by donot521

Awaiting patiently for the rear trunk spoiler to back in stock too

Yes, all carbon will be back in stock within the next few weeks.

Thread: PURE Carbon Front Spoiler For Audi A3 / S3 8V: NOW AVAILABLE!

Thread Tools

Display

PURE Carbon Front Spoiler For Audi A3 / S3 8V: NOW AVAILABLE!

Bookmarks

Bookmarks

Posting Permissions