OFFICIAL B9 A4 Wheel Gallery

[stephenhan]

Would the 245/35 or 255/35 be closer to 265/30 on the 9.5 above?
The obvious solution is find a 265/30 tire, but I have easier access to the other two options.

Thanks again!

Love this forum!

[Mops@Nemesis]

Would the 245/35 or 255/35 be closer to 265/30 on the 9.5 above?
The obvious solution is find a 265/30 tire, but I have easier access to the other two options.

Thanks again!

Love this forum!

The 245/35 will be closer in height to the 265/30. The 255/35 will be taller than the 265/30. I personally would go 255/35. I’ll be running 255/35/20 on my B9 S5.

Happy to help!

Sent from my iPhone using Tapatalk

[Midshift]

Was down in Helen this past weekend for Eurotripper Alpine Volks Fair. Got a few shots of the car "done" and figured I may as well share somewhere that isn't just social media. I purchased the wheels very used and rebuilt them earlier this winter, took a fair bit of trial and error to tuck, but I couldn't be happier.

Specs are:

Work Meister S1 3P Full Polish
5x114.3 drilled to M14 using the M12 Stud Converstion from Motorsports Hardware
Project Kics R40 M12x1.5 Lugnuts

19x10 +24 Front (T-Disk, 3" Lip)
19x10 +25 Rear (L-Disk, 3.5" Lip)

Wrapped in 245/35/19 Michelin Pilot Sport 4S


348360206_208764785346815_6230256582571871231_n.jpg
348356715_554125153565282_5444350160302789269_n.jpg
348356141_562371965980024_6707739894593805973_n.jpg

[Fox-dh]

Thank you very much for accepting me into your community.
I own an AUDI A4 B9 AVANT I would like to upgrade my car rims and tires.
without any kind of problem.
I think 20x10 in the front would be too aggressive, but if you can put it, I'd prefer it, or 20x8.5 ET30
the problem is that the JR 28 rims do not exist in 20X9 nor in 20X9,5
I can, if necessary, have the wheel arches widened, do you think these measurements are correct?
thanks
Wheel Manufacturer: Japan Racing JR28
Wheel Diameter x Width Front: 20X8,5 or 20X10 ?
Wheel Diameter x Width Rear: 20X10
Wheel Offset Front: (8,5)ET30 or (10)ET40 ?
Wheel Offset Rear: ET40
Finish: Platinum Bronze
Tire Size: 255/35 R20
Suspension: STOCK

thanks

[FunkyTechnician]

Mops hooked up these Vorsteiner FF-103s a couple few years back now and I still love em. Powdercoated in Prismatic Powders Electro Gold, inspired by the Porsche Neodyme finish wheels.

[wkwallace]

IMG_0989.jpgIMG_0991.jpg

Pics by Trevor Tsoi Photography btw

Rotiform TUF in Gloss Silver
19x9.5 ET22
Michelin Pilot AS4
255/35/19
034 Motorsport springs

I got a bit of rake after installing the 034 springs. Front is a bit higher than the rear. Did anyone else experience this?

[xdewhy]

How would 10mm spacers fit on 8.5" ET35 on 245? Stock suspension lowered on EMD springs too.

I'm thinking it would be perfectly flush at the rears?

[koldbond]

IMG_0989.jpgIMG_0991.jpg

Pics by Trevor Tsoi Photography btw

Rotiform TUF in Gloss Silver
19x9.5 ET22
Michelin Pilot AS4
255/35/19
034 Motorsport springs

I got a bit of rake after installing the 034 springs. Front is a bit higher than the rear. Did anyone else experience this?

Yes, seems to be quite common. However, even stock I noticed some reverse rake. I put in H&R sport springs on my '21 Allroad and there is still some reverse rake.

[koldbond]

20230907_075327-EDIT.jpg

Superspeed RF05RR 19x8.5 +25

Not sure if I'm loving it. Might be too racy looking for a classic wagon shape.

[almostnardoa4]

First time posting on Audizine so i dont even know if this is gonna post properly.
My 2018 A4 S-Line Technik in quantum grey... This year i ran the wheels I've always wanted to run but could never find, 20" Bentley Mulliners! Love how easy it is to make the B9 look good. Simple lips, OEM wheels, and bags are all you need!
In the least douchey way possible, I believe I'm the first B9 running these wheels but I would love for someone to correct me! Posting this in case anyone is looking for some inspo like I was before i got these. Im glad I just bit the bullet and put them on though. Totally worth it.

Alexi.jpg

Bentley Mulliner
20X9
+41 (20mm spacers on the front, 15mm spacers on the rear)
Sterling Silver faces, Polished Lips
235/35R20
Airlift Performance 3P

If you wanna see more pics check the insta (@almostnardoa4). For some reason i can only upload one to this post?

[Mops@Nemesis]

Guys,

We have some wheel specials to announce -

Rohana RFX - 15% off
HRE FF - 25% off
Neuspeed Rse - 15% off
Forgestar FF - 20%

Hit me up for details!

[email protected]

[Midshift]

With wintertime approaching here in Michigan it was only right to take the Work Meister S1 3Ps off (check my prior posting in this thread). I purchased a set of Volk Racing TE37s from a friend locally who had them on his SQ5. While not the most aggressive offsets offered, they work fantastic with our chassis.

Volk Racing TE37 Ultra
- Matte Blue Colorway
- SPEC 2 Faces
- 20X9.5 +25 Squared
- 255/35/20 Kenda KR400 Tires

Was down in Nashville the other weekend to hand off the Meisters (to yet another friend) and had a good friend of mine get some pictures. Brakes look tiny, but I have a few things planned this winter, namely Q7/RS5 380mm Front Calipers & S/Q7 350mm Rear Calipers. So forgive my tiny brakes, they'll be gone soon.

401806437_6359312037507342_8001156345837715025_n.jpg

401768400_6359311547507391_8797496587259841464_n.jpg

401796263_6359311034174109_5537031614641937433_n.jpg

[Thrilla]

TE everything!

[vinnycustodio]

Anybody here running 245/35/19 with 9.5 Wheels?
I'll probably go with this setup because I didn't want to switch to new rubber, I just got the car and lowered it on EMD, now I need some wheels :)

[Dylle]

Hey ho!
Just recently got myself a 2021 A4 Avant, S-Line.

I’ve been looking around and have been having a hard time choosing between 19 or 20” rims. So far it looks like I’ll be going with 20”.

Now as for the question:
Will 20x10 ET42 fit on 265/30 (perhaps 275s?) on an A4 S-line both front and rear? How will fitment be?

There’s also an option to go 20x8.5 ET38.
Would these sit best on 245 or 255s?

Thanks!

[Midshift]

Forum looking pretty dead as a whole, but figured I may as well throw the new iteration of the my allroad up here.

Specs are:

Work VS-XX SR (Step Lip)
20x10 +24 T-Disk front (2" Lip)
20x10 +25 R-Disk rear (2.5" Lip)
Ohtsu FP8000s in 255/30/20

Brakes are:

4M Q7 380mm Fronts
4M Q7 350mm Rears



Picked them up from an Audizine member a few months ago. Those in the know will know that +25 w/ a 2.5" lip on R-Disk does not exist. The rear faces were milled from +21 to +25 (4mm shaved). I had the centers sent to California in January for triple chrome. Very happy with how they turned out. Didn't even have to unseal the barrels and reused all the of the like-new black hardware.

Have a buddy who makes 3D printed floating caps, so these were one of the first projects. Again, some may know that "big base" VS-XX faces do not offer this cap. I purchased a branch new set of optional "Small Base" Work insignia caps, split them apart, and mated them with the 3D printed big base centers. Yes, they float when driving and yes, it's cool.

Overall a pretty slick project. Opted for the FP8000s as I wasn't quite sure of they'd tuck and didn't want to gamble $1200+ on Pilot Sports. Wanted an overall rolling diameter on par with my previous Meister setup (posted above). Enjoyed the TEs, but couldn't get over how high the car sat when aired out. Car doesn't see any intense driving here in Michigan and these get the job done. Some may know these are akin to the old Falken 452s everyone loved back in the day.

If you have questions, let me know! Give me a shout here or on Instagram at @spec.mi

FWIW I'll also be at Riverside 9 this coming weekend and AVF in May for 2024!


IMG_8552.jpg IMG_8551.jpg
IMG_8527.jpg IMG_8532.jpg

[DKo5]

Just picked up an '18 A4, looking to put on the '18 TT-RS wheels I've got in storage. Given some of the setups in here I'd be surprised if they don't fit, but looking to see if anyone has tried? Wheels are 20x9 ET52 and tires are 255/30ZR20

[Midshift]

Just picked up an '18 A4, looking to put on the '18 TT-RS wheels I've got in storage. Given some of the setups in here I'd be surprised if they don't fit, but looking to see if anyone has tried? Wheels are 20x9 ET52 and tires are 255/30ZR20

Offset is way too high. If you are going with a 9" wheel, look between +25 and +35!

[SaqLocke]

I have an opportunity for a good deal on some wheels that are 19 x 9.5, et46. Reading through this thread I see most offsets at 35ish. Will 46 fit? Thanks for any help.

[Mops@Nemesis]

I have an opportunity for a good deal on some wheels that are 19 x 9.5, et46. Reading through this thread I see most offsets at 35ish. Will 46 fit? Thanks for any help.

Fits I’d still do a 5mm spacer for a nice look.


Sent from my iPhone using Tapatalk

[SaqLocke]

Thank you sir. You are a gentleman and a scholar.

[SaqLocke]

Here is 19x9.5 et46. Appears to be about the limit for offset at this width. Here's some pics before tires. Sorry they are disorienting, not sure why they rotated as attachments. First one shows wheel to knuckle, the lip of the wheel being the silver at the bottom of the pic. There's just enough room to get a finger tip in-between them. Second pic shows super slight clearance of spoke over caliper. I'll post completed pics when I get done. Planning 5mm spacers and 255/35 tires.
IMG_5068.jpg

IMG_5073.jpg

[Pexier]

Will a 19x8.5 ET30 255/35 fit without rubbing with S line suspension?
Current summer setup (MAK Qvattro 19x8.5 ET32 245/35):

[xdewhy]

Hoping someone can chime in before I pull the trigger.

I have 245 tires on 8.5" ET35 and determined that 5mm on front and 7mm on rears would bring it basically flush. 10mm seems like it would poke.

It's been mentioned that 8mm hubcentric spacers won't work, but will 7mm hubcentric flat spacers (APR's for example) leave enough of a lip for the rim to sit on?

Car is lowered on EMD springs as well.

Thanks in advance!

[IrregularStance]

Looking at this it almost looks like a 19x9.5 +15 might be doable on the AR. How much space is there between the fender arch and your tires if you dont mind me asking?

[IrregularStance]

IMG_0989.jpgIMG_0991.jpg

Pics by Trevor Tsoi Photography btw

Rotiform TUF in Gloss Silver
19x9.5 ET22
Michelin Pilot AS4
255/35/19
034 Motorsport springs

I got a bit of rake after installing the 034 springs. Front is a bit higher than the rear. Did anyone else experience this?

Looking at this it almost looks like a 19x9.5 +15 might be doable on the AR. How much space is there between the fender arch and your tires if you dont mind me asking?

[Deathstrike]

Hey guys,

Is anybody running on an A4 B9 wheels 8x18 ET25?
I have a B9.5 with 1BE sport suspension and thinking about buying MOMO RF-01 but I'm not sure about the ET.

https://momo.com/en-gb/product/road-wheels-eu/rf-series-eu/rf-01/

[AudiSportDre]

Hey guys,

Is anybody running on an A4 B9 wheels 8x18 ET25?
I have a B9.5 with 1BE sport suspension and thinking about buying MOMO RF-01 but I'm not sure about the ET.

https://momo.com/en-gb/product/road-...ries-eu/rf-01/

I’m on the stock 18x8 ET40 with the ecs tuning flush kit. So 10mm front spacers and 12.5 back on the sport suspension. So call it about et30/28 or so once you factor in the spacers.

I could argue the front would look better with 12.5mm and maybe 15mm in the rear as well. Especially if lowered further on 034 springs or something similar. That being said if you truly want to go for that size wheel it will probably look good. Again, especially after the car is lowered which will naturally camber in the wheels. I’d think it would sit pretty flush.



Sent from my iPhone using Audizine Forum

[Z06jerry]

Hey guys,

Is anybody running on an A4 B9 wheels 8x18 ET25?
I have a B9.5 with 1BE sport suspension and thinking about buying MOMO RF-01 but I'm not sure about the ET.

https://momo.com/en-gb/product/road-...ries-eu/rf-01/

Why not 19 x 8.5?

[jashford]

I’ve got my BBS CI-R 20x10.0 Bronze wheels and 265/30 Falkens for sale if anybody is interested. $2700 rims & tires ($2500 rims only) picked up

https://www.audizine.com/forum/showt...0-Falken-FK510

[MNavant]

I just got a 2018 A4 with a manual and factory 1BE sport springs. Wondering if these factory RS5 19x8 ET 26 wheels would fit? I might like to run 255's, but 245 is fine too. I'd rather have a bit higher ET number, but there is a set fairly local and they look like nice wheels to me. Probably stick out too much, but would be nice if they would work... PN 8W0601025CP

Thanks!