Anyone ever use these ev14 1000cc ebay injectors?

[ltipcke]

Thoughts or personal experience anyone? lol

http://www.ebay.com/itm/Bosch-EV14-9...-/330713666018

[landfill]

It says genuine Bosch units so you
should be alright. Just confirm they are
genuine Bosch injectors. A lot of reman'd
Bosch stuff on eBay. The company five0
makes Bosch ev14 replicas and sells a lot
on eBay.

[LoonyBoyo]

what software are use using to make the vids matey? And what rear view camera did u use I assume gopro on rear?

[julex]

all the bosch injectors over 550/650cc ending in part# 117 or 298 are milled, which means are modified. Depending on who did them, you might get a good set or a hack job.

[NOTORIOUS VR]

It says genuine Bosch units so you
should be alright. Just confirm they are
genuine Bosch injectors. A lot of reman'd
Bosch stuff on eBay. The company five0
makes Bosch ev14 replicas and sells a lot
on eBay.

All in all, this is all bad info.

The ebay link you posted and with obvious reason that they're modded EV14 injectors.

five0 doesn't sell EV14 replicas, but they do sell modified ones as well along with some good and some bad reviews.

That said, you should look towards a proper set of injectors from a credible source like Injector Dynamics, as this isn't the place to be cheap. It can cost you a motor.

[landfill]

@Notorious yeah my wording was a little bit off.
As far as going ago above 1,000cc injectors what do you recommend
for our platform? I bought 1,200cc Five0's but am having doubts.
Also boris aka s4m3 on here was telling me months ago that genuine
bosch ev14's go up to 1,200cc and even bigger.

[jpurre]

The EV14's in this ebay ad cost exactly double what I paid for 550cc through Frankenturbo. I believe these are the same Bosch EV14's from the Ford Mustang GT500. Just go to Ford parts department and get them in the 750 or 1000cc capacity.

[ltipcke]

thanks for the input guys. After talking to some reputable people ive come across some good info. Definitely learning more and more each day.

Im going to go with something along these lines for my build. http://www.efihardware.com/products/...-Extended-Nose with the correct adapters to get to 48mm o-ring to o-ring length.

These are bosch "motorsport" injectors. Im told theses are bosch's top of the line injectors and are actually manufactured to 1000cc (depending at what bar) and not just modified to flow 1000cc. These also can be pushed to a higher psi then the standard ev14 and they hook up to the factory connector ;)

[NOTORIOUS VR]

@Notorious yeah my wording was a little bit off.
As far as going ago above 1,000cc injectors what do you recommend
for our platform? I bought 1,200cc Five0's but am having doubts.
Also boris aka s4m3 on here was telling me months ago that genuine
bosch ev14's go up to 1,200cc and even bigger.

There are motorposrt injectors around the 1000cc mark but they're not really as good as a properly modded 550cc injector from other reputable injectors sellers from what I understand. The injectors s4m3 is talking about were designed for a Polaris engine (can't remember if it's for watercraft or something else). But if you care to look into it, the info is out there.

I've done my share of peddling ID on here, but only because they just are awesome. I've never had issues with them and they stand behind their products and they simply are the best in the business. I have tuned cars with their 2200cc injectors that run/idle/drive like stock never missing a beat.

Many will come and argue that you can get the same for less, but I've seen injectors from all kinds of retailers fail that have been modded by people it's the "same as ID" I have yet to see an ID injector fail and I've used/tuned many and sold a lot as well. And really, after spending large money on modding your car if you're looking for 1000+ injectors, why bother to save on something as important as injectors? Just doesn't make sense.

The EV14's in this ebay ad cost exactly double what I paid for 550cc through Frankenturbo. I believe these are the same Bosch EV14's from the Ford Mustang GT500. Just go to Ford parts department and get them in the 750 or 1000cc capacity.

^^ Doesn't exist.

[landfill]

Yeah I'll definitely be looking into ID's thanks.

[jpurre]

^^ Doesn't exist.

Well noted.

[NOTORIOUS VR]

Well noted.

Just to clarify, the only thing you can get from the Ford parts counter are the 1st gen GT500 injectors which flow ~550cc and the 2nd gen version @ ~630cc