225/35/20 tires on 20x9 wheels

[JJSM]

Hello,

will tires 225/35/20 (yokohama s drive), wheels are 20x9 et 35 tug the entire wheel or will there be stretch ? according to the tire calculator it fits fine over 1% above normal rating.

this are the wheels:




thanks


JJSM

[Okan509]

lots of stretch with a 225 on a 9 inch wheels. 255/65 would be considered square.

[Calbee]

i would barely call that a stretch..




also, S drives run wide so you should be fine, it will be beefier than that

[Calbee]

lots of stretch with a 225 on a 9 inch wheels. 255/65 would be considered square.

i just re-read your post and almost spit my drink out LOL

[Okan509]

i just re-read your post and almost spit my drink out LOL

cool story. but your opinion is not fact.

[WAF]

255/65 on a 20"? what truck are you putting that on?

[Okan509]

255/65 on a 20"? what truck are you putting that on?

sounds like you don't understand

[staticuxo]

sounds like you don't understand

alex, what i think you meant to write was a 255 or 265 is considered square on a 9" wheel..

i believe the misunderstanding came from the "/65" after the 255 because that's where the side wall series thickness is labeled, lol ex: 255/30-20

capisci?

[Okan509]

alex, what i think you meant to write was a 255 or 265 is considered square on a 9" wheel..

i believe the misunderstanding came from the "/65" after the 255 because that's where the side wall series thickness is labeled, lol ex: 255/30-20

capisci?

right, would think that is fairly obvious what I meant, however

[staticuxo]

right, would think that is fairly obvious what I meant, however

i'm just pointing out where the confusion lies, pal.

[Okan509]

i'm just pointing out where the confusion lies, pal.

yes I realize, thank you

[Calbee]

right, would think that is fairly obvious what I meant, however

not really. which is probably why me and the other guy thought you were talking about a 65 sidewall

[Okan509]

it was a typo, but you know very well I am informed enough to know that 65 sidewall is ludicrous.

people always assuming when it's unnecessary and never when it is, on these forums

[WAF]

yah i thought you were talking about a 65 profile not 265. when i see 255/65 20 i think of the complete detail on the wheel not what you meant.

[Wilbur]

Hello,

will tires 225/35/20 (yokohama s drive), wheels are 20x9 et 35 tug the entire wheel or will there be stretch ? according to the tire calculator it fits fine over 1% above normal rating.

this are the wheels:




thanks


JJSM

Why wouldnt you go wider?

[JJSM]

that is practically the best option among the available tires where I live.

255/30/20 which will be the best fit is not available, will have to import it and is like 2x more expensive.

thanks for replies.