Injector information Bosch 0 280 158 193

[vtraudt]

Does anybody have accurate data (at least flow) for the
Bosch EV14 0 280 158 193 0 or 0280158193?

Claimed to be 550cc, but cannot find ANY data sheet or flow tests on them.

[Flowmotion]

They are definitely not 550cc in my experience. I have read around 330-350cc @ 39psi. They are from Ford 4.6 & 5.4L trucks & vans. There is no way that those vehicles needed 550cc injectors.

I will pick up a couple and flow test them. I have an ASNU flowbench.

[elewsader]

I know this is an old POST, but just in case someone else stumbles across this, the information that I found with these I found here: https://bulletperformanceracing.com....injectors.html


Ford EV14 45lb Bosch Fuel injectors

E85 Compatible



These injectors are factory used in FPV Coyote GT 335kw and GS 315kw will support up to 600hp @ 3.5Bar

Specifications:-

- These are the Genuine Bosch injectors


Body Design: EV-14 Composite Plastic
Spray Type : Conial
Flow rate: 45lb @ 3.0Bar (472cc)
Flow rate: 51lb @ 3.5Bar (510cc)
Flow rate: 54lb @ 4.0Bar (550cc)
Length: 2.3/8 inches, 64 mm
Diameter: 9/16 inches, 14 mm
Orings: Top and bottom, 14.5 mm
Resistance: 14.5 Ohms
Electrical connector type: U.S. CAR
Part number available: 0280158193

Injector Setting used for Tuning are as below when using 3.5Bar Fuel system.
Fuel Injector Breakpoint lb .0000129
Fuel Injector Hi Slope 0.0125200 (45.07lb)
Fuel Injector Lo Slope 0.0167999 (60.47lb)
Fuel Injector Min Pulse Width .0003499

[Flowmotion]

The info posted on BulletPerformance is incorrect. Here is a link to the flow results. Tested at 43.5psi, 20*C, with flowrite test agent.

https://www.facebook.com/Performance...7908707652095/

0280158193 0-280-158-193 0 280 158 193