Audi A4 to RS4 Grill question.

[a42010silver]

Hello guys if I wanted to do a conversion from the basic Audi A4 B8 grille to something like this how hard would it be? Is this easy enough to do by myself. and how much would this cost? I'm looking for around 200$ total if anyone could link me to where I could buy one for that price I would be very appreciative.

Thanks

[AudiKerl]

It easy, all you have to do is take off the bumper. A good 10-20mintue job. Maybe longer, if it's your first time. You can find the grille on eBay for around 200 but then maybe 60 for shipping. Unless you can find one in the classified for cheaper. Just search b8 a4 rs4 grille on eBay.

[TheHeiko]

Good info above but even better, so a search and you will find everything you need to know and see about this mod and then some. There is one very long thread about this.

[rooski39]

I got mine here and it fits like a glove and looks amazing! Very easy to replace as well.

http://www.ebay.com/itm/171037559671...84.m1497.l2649

[wxsgt]

I got mine on massdrop.com and quality is great. install is easy just a few tools and only took me a couple hours the first time.

[SDF1]

You should get a spray paint can to paint the crash bar.

And if you have home link (garage door opener) figure out a place to put the sensor.

[wxsgt]

I plastidipped my crashbar and used 3m heavy duty 2 sided tape for the homelink sensor on the back of the crash bar. it is holding great

[ECS Tuning-Audi]

We have RS4 style grilles available below with FREE shipping!

Click HERE to order or for more information

Our installation PDF is HERE

**Be sure to confirm your model year before ordering**

Let me know if you have any questions.

Jason

[hender]

A good 10-20mintue job. Maybe longer, if it's your first time. You can find the grille on eBay for around 200 but then maybe 60 for shipping. Unless you can find one in the classified for cheaper. Just search b8 a4 rs4 grille on eBay.

i'm not very tech-inclined, but wtf. 10-20 mins?
took me an afternoon of hours by the time it's said and done. couldn't find certain bolts, tabs were a bitch, etc. etc.

[AWDLover]

i'm not very tech-inclined, but wtf. 10-20 mins?
took me an afternoon of hours by the time it's said and done. couldn't find certain bolts, tabs were a bitch, etc. etc.

haha yeah I'd love to see someone replace a grille in 10 mins....

[ChornsYYC]

Realistically it's about a 60 min job if you're going to allow the paint/plastidip on your crashbar to dry in order to properly do two or more coats. I used this DIY: http://www.audizine.com/forum/showth...Bumper+removal

[AudiKerl]

i'm not very tech-inclined, but wtf. 10-20 mins?
took me an afternoon of hours by the time it's said and done. couldn't find certain bolts, tabs were a bitch, etc. etc.

Ok, maybe I exaggerated a little bit. But it took me around 20mins to do mine.

[OB1]

I plastidipped my crashbar and used 3m heavy duty 2 sided tape for the homelink sensor on the back of the crash bar. it is holding great

+1, except my homelink is taped underneath the air intake scoop.

It's a 1hr job. If you have jackstands or a lift, it's even quicker since you need to access bolts behind the inner wheel wells. If not, you can just jack up the car and turn the wheels to full lock either side.