Dnj engine components

[MiniBoost]

does anyone have exp. with them? im looking to replace my main bearings, connecting rod bearings and piston rings

[MiniBoost]

75 people looked and no one knows anything?

[redline380]

never heard of them. i'd stick to better known brands but depends on what you plan on putting in

[themadscientist]

Unless you know it's a re-brand of another reputable company, I wouldn't do it. Stick with stuff that's known to work.

Hastings makes a very affordable and good ring set. Mahle-Clevite, ACL race, etc for bearings.

[MiniBoost]

i already brought something else, i was just trying to avoid shipping from another country but oh well


does anyone know what an auxiliary shaft bushings is? the machine shop thats doing my engine told me i needed it and google is useless, is there a different name for it?

[redline380]

I'm guessing they mean intermediate shaft bearings

[Seerlah]

Don't know what that bearing is, but these are what I would have suggested. Glyco bearings all around if not going with coated units and Goetze piston rings for stock bore.

[MiniBoost]

i got Glyco bearings and Goetze piston rings coming :) and im calling the shop to see if they meant intermediate shaft bearings

[MiniBoost]

http://techtonicstuning.com/main/ind...oducts_id=1354 these will work right? cause its the only website i found that has them

[themadscientist]

http://techtonicstuning.com/main/ind...oducts_id=1354 these will work right? cause its the only website i found that has them

Yep

[MiniBoost]

i got an oil pump question, my stock one has 150k, since im doing a bottom end rebuild, should i replace it or clean it up, the pick up tube is clean as hell, i thought about pulling it apart and cleaning it up inside and be done with it, save myself $60 to put towards something else.