Pics of Deep Dish wheels on S4

[motorboatingsob]

I want to put a deeper dish wheel on my S4. I have seen most of the guys on the forum putting a rim with the inner hub pushed out as far as possible, but what about the opposite? I come from rear wheel drive cars that I was always able to put a semi deep rim up front and a really deep rim in the back. I am looking to do a deeper rim look if possible and obviously if it looks good. I am curious if anyone has gone that route and what my options would be?

1. Is possible to put a relatively deep rim on these cars with the offset?
2. If it is, how much, and any recommendations
3. Pictures please of someone who has done something like this so I can see if it is going to achieve the look I am after.

[awdjunkies]

Here's a couple of sites to get your wheels rollin' :

http://www.getyourwheels.com/wheels/...ll/vehicle-288


http://www.wheeldude.com/wordpress/category/audi-wheels


http://www.audizine.com/forum/showth...Gallery-Thread

[A5RIZ]

Still have these HRE's for sale...

[b6bydesign04]

Just a few of some of the 'larger' lipped wheels I've seen on a B8 S4:

Jacksonbeall's on Rotiform NUE's (http://www.audizine.com/forum/showth...y-low-s4-build)




Mine on Rotiform BLQ's (http://www.audizine.com/forum/showth...White-S4/page2)




(Not sure if he's on here) on Rotiform IND's




Clear's B8 A4 on HRE 547R's (http://www.audizine.com/forum/showth...=1#post4683926)





Like awdjunkies suggested, I would definitely recommend taking a look at these two threads as well:

http://www.audizine.com/forum/showth...Gallery-Thread

http://www.audizine.com/forum/showth...el-Gallery-***

[Pworld]

Those first 3 cars on the rotiform's = FML I'm poor!!!!! Well executed with the first one being the extreme and hard as hell!

[motorboatingsob]

First set looks nasty I like them maybe a different center but I like the look

[phillips2024]

certainly not deep dish but here is my setup. stepped lip, "deeper" than most here anyways

[APedicelli]

[APedicelli]

Rear 3'' Front 2''

[biketsai]

ADV 10 or Vossens would look amazing

[motionneon]

Those look amazing. Usually don't dig colors but looks great with blue IMO.

[Alex@TAG]

How about some HRE 501's on our 2011 TAG Twins :)

[NJDeVsFaN]

Here are my 3pc wheels with a 2 inch step lip.

[A5RIZ]

Hey Devs...sick house and car...thanks for beating the Rangers...( Isles fan here...no comments please )

[NJDeVsFaN]

haha thanks, but not my house (I wish!)

[CampioniShop]

It won't get much deeper than this!

20x9.5F
20x10R
Step lip
Flat face
Titanium fasteners
Brushed copper faces with mirror polished lips
Barely 20 lbs
3 Piece Forged

To request a quote and for more information, visit:
http://www.campionishop.com/products...?cid=61&clev=1

[catch]

It won't get much deeper than this!

20x9.5F
20x10R
Step lip
Flat face
Titanium fasteners
Brushed copper faces with mirror polished lips
Barely 20 lbs
3 Piece Forged

To request a quote and for more information, visit:
http://www.campionishop.com/products...?cid=61&clev=1

wow! this finish is VERY nice!

[motionneon]

It won't get much deeper than this!

Uhhhh ..That's what she said!

[ModBargains III]

Here's two more options for you. Forgestar F14F wheels:



And MM6 Mesh wheels:







Don't hesitate to PM/Email or call at 714.582.3330 extension 8002 if you have any questions.

[A5RIZ]

Has Forgestar ever sold a set of the F14F...I dont think i've ever seen a set on a car...beautiful simple wheel i've always liked but too much $$$

[ModBargains III]

Has Forgestar ever sold a set of the F14F...I dont think i've ever seen a set on a car...beautiful simple wheel i've always liked but too much $$$

Yeah they've sold a few, not as much as their other wheels, but they have sold the F14F. Couple sets were ordered not too long ago, not for an Audi though. Here's some more pics:

[turr520]

I don't get deep dish wheels but these are very nice pictures. Thanks.

[motorboatingsob]

Love HRE's, but not a fan of mesh wheels

How about some HRE 501's on our 2011 TAG Twins :)

[motorboatingsob]

These look nasty. I like them a lot except I don't want copper finish. How about in just brushed or hyper silver and in 19's instead? Could I get away with a 9.5 front and 10 rear width in 19's and still fit the car without rubbing? I won't be lowering this car so 20's would seem to big and make the car actually sit higher with stock suspension, correct?

It won't get much deeper than this!

20x9.5F
20x10R
Step lip
Flat face
Titanium fasteners
Brushed copper faces with mirror polished lips
Barely 20 lbs
3 Piece Forged

To request a quote and for more information, visit:
http://www.campionishop.com/products...?cid=61&clev=1

[CampioniShop]

We can do 17" 18" 19" and 20" on that wheel. We can do a simple brushed or hyper silver as well!

I would stick with a 19x9.5 all around - 19x10 is very aggressive and is better ran when lowered for a perfect flush fitment.

These look nasty. I like them a lot except I don't want copper finish. How about in just brushed or hyper silver and in 19's instead? Could I get away with a 9.5 front and 10 rear width in 19's and still fit the car without rubbing? I won't be lowering this car so 20's would seem to big and make the car actually sit higher with stock suspension, correct?