Post your wheel/tire setup with pictures and information...

[coolgraymemo]

Sawblades have been played out for a while. I think they peaked around 2013-2014.

[happy2B5]

Sawblades have been played out for a while. I think they peaked around 2003-2004.

Ftfy...dont call it a comeback. Personally I think they look good on the b5 s4. Those hammered out, fried bacon fenders, not so much.

And who gives a f anyway. Run what you like. If it looks good it looks good.

[pwalsh6988]

Sadly enough the fender was not by being hammered out. Drivers side spring broke and caused that. Everyone will have there opinion.

Not popular out my way so f*ck sorry you don't like them

Sent from my SAMSUNG-SM-N910A using Tapatalk

[MikeyB3]

That Volvo is sexy as faaaaack!

I didnt know those wheels would transcend so well. Very nice stuff. Each one presents a little differently.

[cinimod25461]

@gmdiluca I really like that setup with the 18z's and the RPF1's. I just wish we could fit the RPF1's with the flat spokes instead of the convex shape on our cars. Looks like a nice track setup though!

[nsaneS4]

@gmdiluca I really like that setup with the 18z's and the RPF1's. I just wish we could fit the RPF1's with the flat spokes instead of the convex shape on our cars. Looks like a nice track setup though!

You can fit them. You just need b7 s4 front brakes.

[cinimod25461]

You can fit them. You just need b7 s4 front brakes.

Ah ok. Yeah I remember reading about people having brake clearance issues (even with the stock HP2's) with the 18x9 et35 RPF1's, so that's what I was referring to. I should have added that it would be cool to run those spec wheels with 18z's.

[zatch_303]

18x8 et 43 5x112
BBS CH 028
235/40R18
No spacers but will be getting some soon along with coilovers.

Yes it's an A4. These wheels WILL NOT clear front HP2s on the b5 s4 without spacers. Hence why they're on the a4 for the time being.

[JJ.]

1999 S4

Wheel make/name: BBS RS2
Wheel size: 18x8.5
Offset: et32
Tire size: 215/35/18
Suspension: Airlift Performance
Modifications: 12mm spacer front, 25mm spacer rear




Wheel make/name: Audi A8 D3 Fat/Flat Five
Wheel size: 18x8.5
Offset: et45
Tire size: 215/40/18
Suspension: Airlift Performance
Modifications: 12mm spacer front, 25mm spacer rear

[gmdiluca]

@gmdiluca I really like that setup with the 18z's and the RPF1's. I just wish we could fit the RPF1's with the flat spokes instead of the convex shape on our cars. Looks like a nice track setup though!

Thanks! I get complements all the time. Running no spacer in the front and there is probably only 3mm of clearance between the 18Z and Enkei spokes. I wanted the 18x9 but didn't want the hassle of fitting them. And ya car handles great with this setup.

[stevesS4]

x post

What's the best place to find buy b5 rs4 reps for our cars? I've found a few sites online but they all state the wheels aren't for s4 or 2.7 models... example.

[happy2B5]

They might not clear the hp2 caliper? Only reason they "aren't for s4". But, the allroad they say it fits has the same hp2 caliper. At 8" wide et35 you could get away with a 10mm spacer to clear. Find out their return policy, order one and test fit. Hartmann used to make one, but may have discontinued.

[wbrunner23]

Just grab a set of A4 USP wheels. 8J ET43, iirc. They clear HP2s, at least they did on mine. I'm running spacers now, more for fitment than clearance: +8 up front, +12.5 out back.



Front wheel is slightly turned (not straight), otherwise it would look flush with the fender:

[S is for Slow]

19" OZ Racing wheels on the car. I need to lower it a little bit

Front drivers wheel.

[e30mclow]

18x10j Square.








..and the more subtle 18x9.5J Square
Love these

[Zandgah]

Winter setup: 18X8" et35 Dezent RN wrapped in 235/40/18 Hakkapeliitta 7

[nmercer485]

A few recent pics. Might change it up next year.. Don't know.

v701 et35 5x112
10mm in rear
eibach coils

[samaj]

My RS4 on OE S5 specs 19x9" Rotors

[01nogaro]

Just grab a set of A4 USP wheels. 8J ET43, iirc. They clear HP2s, at least they did on mine. I'm running spacers now, more for fitment than clearance: +8 up front, +12.5 out back.



Front wheel is slightly turned (not straight), otherwise it would look flush with the fender:

Love the OEM look, big fan. nice work fellow PNW'r

[WillRace4Food]

Alzor 040
19"x8.5" ET35 with 5mm spacer to clear stock brakes
225/35-19 Dunlop

[Ripcord]

B6 S4 wheels
10mm spacers front and rear
235/40/18 Bridgestone S-04
Vogtland coilovers brought down a little bit.

[Audimilo]

^ Good looking car!

[RaudiB5]

Wheel and tire specs:

-VSP 18x9 t40 w/225/40 Hankook V4's
-12.5mm (F) and 20mm (R) ecs spacers.
-Custom built D2 coil-overs with pillow ball mounts and springs.



VSP Taxi by Pure Fitment, on Flickr


Brighten up. by Pure Fitment, on Flickr

[Hovde]

Another one of the Zito L26's, 18x10" ET35 + 5mm spacers on all fours.
Currently on Falken 225/40's. Will most likely do 235/40 and no spacers in the future.
A tad too high due to clearance issues with the 3.5" exhaust

[wbrunner23]

Wheel and tire specs:

VSP Taxi by Pure Fitment, on Flickr


Brighten up. by Pure Fitment, on Flickr

I like it! The wheel design makes them look bigger than 18". Well played

[F.Dogan]

Blistein Sps 03 coilover

S4 B6 18'' Avus Wheels

Continental Suport Contact 5 225/40/18

[RaudiB5]

I like it! The wheel design makes them look bigger than 18". Well played

Thank you.

[Sumo337]

Wheel make/name: BBS RC
Wheel size: 17x7.5
Offset: stock GLI size
Tire size: Dunlop Direzza ZII 225/45/17
Stock fenders
Suspension:
034 Density Line front control arms and solid metal tie rod ends
034 Density Line front strut mounts
Vogtland lowering springs
Bilstein shocks
Hotchkis H-sport hollow 35mm front swaybar with updated links
Neuspeed 19mm rear swaybar with updated links

[BUK_DAA]

IMG_20151219_164113 by Oda Siri, on Flickr

[NordicMistBB6]

Don't think ive posted mine yet.

Wheels:
Rotiform SPF 18x9.5 et35
225/35/18 Federal SS595
10mm spacer up front and a 15mm spacer in the rear

Suspension:
Airlift Performance front and rear bags
Airlift v2 management

[$teady$upreme]

Liked a lot of your ig pics. Definitely dope ride.

[NordicMistBB6]

Liked a lot of your ig pics. Definitely dope ride.

thanks man! definitely favorite car that i have owned. i love the ccw's on yours!

[Spoorguy]

Love the set up, real clean.

Don't think ive posted mine yet.

Wheels:
Rotiform SPF 18x9.5 et35
215/35/18 Federal SS595
10mm spacer up front and a 15mm spacer in the rear

Suspension:
Airlift Performance front and rear bags
Airlift v2 management

[bobkatkat]

Don't think ive posted mine yet.

Wheels:
Rotiform SPF 18x9.5 et35
215/35/18 Federal SS595
10mm spacer up front and a 15mm spacer in the rear

Suspension:
Airlift Performance front and rear bags
Airlift v2 management

\

Damn those are nice shots of a sick setup!! Love it. Question I was considering those rims but was wondering about the spoke clearance, do you run spacers for look or to clear the calipers? Also love the air and stance but was wondering how you deal with 215 tires? My car feels absolutely squirrely on anything less 235 supper grippy tires and only really feel totally confident beating on it with 255s and would love to have something bigger. Just wondering if anybody has any input on the widest tire/wheel combo with bagged car? Maybe even input on a widebody?

[Cacti]

Ive seen a widebody with a 295 mounted on the rear with a 18x9.5" team dynamic.

[JVD]

Put wheels on the car. They fit on the car.

18x9 +35 235/40

Mind the lube/gap.

IMG_20160103_113503 by jvd240, on Flickr

[xalents23]

Put wheels on the car. They fit on the car.

18x9 +35 235/40

Mind the lube/gap.

IMG_20160103_113503 by jvd240, on Flickr

What wheels are these and where did you get them? I likes!!!

[JVD]

What wheels are these and where did you get them? I likes!!!

WedsSport TC105N. Local supplier got me in on Weds "Black Friday" deals.

Bit of a change from my 19" BBS CH. 25lbs to 17lbs per wheel.

Brake clearance for days on my Brembo GT too. Only issue is they're 5x114.3.

[xalents23]

WedsSport TC105N. Local supplier got me in on Weds "Black Friday" deals.

Bit of a change from my 19" BBS CH. 25lbs to 17lbs per wheel.

Brake clearance for days on my Brembo GT too. Only issue is they're 5x114.3.

Thanks for the wheel info. Darn, I had a feeling the lug pattern was going to be different.

[bobkatkat]

WedsSport TC105N. Local supplier got me in on Weds "Black Friday" deals.

Bit of a change from my 19" BBS CH. 25lbs to 17lbs per wheel.

Brake clearance for days on my Brembo GT too. Only issue is they're 5x114.3.

Those look great. 18x9 with a beefy 235/40 seem to fit the B5 perfectly. Now that you have them on the car is there any other offset you can see working with that rim? et30?