Audizine - An Automotive Enthusiast Community

Page 12 of 25 FirstFirst ... 2101112131422 ... LastLast
Results 441 to 480 of 967
  1. #441
    Veteran Member Four Rings ENDEE666's Avatar
    Join Date
    May 04 2007
    AZ Member #
    17761
    My Garage
    A6 2.7T 6MT Modded. Allroad 2.7T 6MT.
    Location
    LI,NY

    Guest-only advertisement. Register or Log In now!
    Quote Originally Posted by ceeeheee View Post
    Hey everyone, looking for some advice!!

    Just picked up a set of vmr 710 18x9.5 et 45 for a price I couldn't refuse.. However these wheels need rubber... I have an 03 c5 a6 2.7 w/ koni fsd shocks/eibach springs. With the wheel set came 12mm spacers(if they dont work I'll get new ones). What tire should I run 225 or 235? I notice quite a few of you guys are stretching the 225 on the 9.5 wheel? Curious to see everyones opinion based on experience with these 18x9.5

    Any input is greatly appreciated!
    Craig
    Your answer is in this very thread. Some like stretch and they do 225 on 9.5. Personally I run 255 on my 9.5. All depends what you want. Plenty od posts about 9.5 width on here. See what you like.
    01 A6 2.7T, blk/blk, 6MT, SSP Tuned!, 3,996 lbs w/ me, full weight, street tires, 29+lb wheels.
    Ran an 11.8 @ 119 at MIR - Sept 2008. FIRST A6 IN THE 11's!
    Also 04 Touareg 4.2 89k with 22x10s

  2. #442
    Established Member Two Rings mic_detonator's Avatar
    Join Date
    Nov 04 2013
    AZ Member #
    128365
    Location
    g2

    So i have a tire size question, will 205/40/17 fit my stock 17's? Seems a tad small to me.

  3. #443
    Veteran Member Four Rings ENDEE666's Avatar
    Join Date
    May 04 2007
    AZ Member #
    17761
    My Garage
    A6 2.7T 6MT Modded. Allroad 2.7T 6MT.
    Location
    LI,NY

    Quote Originally Posted by mic_detonator View Post
    So i have a tire size question, will 205/40/17 fit my stock 17's? Seems a tad small to me.
    Way too small. Stock 17" size is 235/45/17. Which is 30mm wider and 23.75mm shorter per sidewal. Which means total diameter is almost 2" too small.
    01 A6 2.7T, blk/blk, 6MT, SSP Tuned!, 3,996 lbs w/ me, full weight, street tires, 29+lb wheels.
    Ran an 11.8 @ 119 at MIR - Sept 2008. FIRST A6 IN THE 11's!
    Also 04 Touareg 4.2 89k with 22x10s

  4. #444
    Established Member Two Rings mic_detonator's Avatar
    Join Date
    Nov 04 2013
    AZ Member #
    128365
    Location
    g2

    Thats what i thought, i have a 235 on there and got a nice flat today. So time for a new tire i think.

  5. #445
    Established Member Two Rings Brooklyn67's Avatar
    Join Date
    Oct 24 2013
    AZ Member #
    126648
    Location
    Brooklyn, NY

    For a 2002 S6: Will an 18"x8" wheel with 245/45 tires fit under the front/rear fenders without rubbing? I know that the stock size is 255/40 R17 and the diameter is 25.03". The diameter of the 18" wheel with the 245/45s is 26.68". The offset on the wheels is 45mm.

    Besides speedometer error and additional ride height, will this tire/wheel combo fit without rubbing the inner fender liners?

  6. #446
    Veteran Member Four Rings Korben007's Avatar
    Join Date
    Nov 08 2007
    AZ Member #
    22460
    My Garage
    00 Celica Supercharged, 02 S6, 04 S4 Avant
    Location
    Lake Tahoe, CA/NV

    ^Might want some spaces. Gonna be quite a sunken setup
    Current Rides:
    2000 Toyota Celica GT-S Supercharged - 2008 Audi A3 VRT(SOLD) - 2003 Audi RS6 Avant - 2013 Audi Q7 Prestige
    2000 Audi S4 Stage 3(SOLD) - 2008 Audi TT 3.2 (SOLD) - 2002 S6 Avant Manual w/ S8 PES Supercharged - 2015 Porsche Cayman GTS
    1990 Audi Coupe Quattro(SOLD) - 1993 Toyota MR2 Big Turbo(SOLD) - 2001 Audi S6 Sedan (SOLD)
    @audijedi

  7. #447
    Veteran Member Four Rings stef2.7t's Avatar
    Join Date
    Mar 22 2008
    AZ Member #
    26729
    My Garage
    '02 S6
    Location
    D'edmonton

    Would 20x10, et29 run into any problems on a c5 S6.
    -Stefan-

    '02 S6 Atlas Grey
    '01 A6 2.7T MT Sport --- Sold
    '95 GTI 2.slo --- Sold

    Need Radio Keys, VAG-Com? PM Me, bring beer

  8. #448
    Veteran Member Four Rings Racin2redline's Avatar
    Join Date
    Aug 19 2012
    AZ Member #
    98945
    My Garage
    1997 Yamaha razz 50 (sik)
    Location
    Long island

    Post your wheel/tire setup with pictures and information...





    Stock wheels no spacers will be adding 15mm soon. Yokohama Geolander ATS 225/60/17 (27.6in tall) max is probably 28in

    FYI this is about the biggest you can fit without rubbing lock to lock I also took Into account airing down for beach use.. So even if a bigger tire was possible it would probably rub the upright.

    Also there is slim choices for an allterrain tire close to stock sizes. Fortunately the Geolander is an amazing tire!

    A 16in rim with the right lower offset (ET32 or lower) would yield better tire results like a 215/65/17 general grabber AT2 and Bridgestone revos ect.
    Last edited by Racin2redline; 02-08-2014 at 10:48 AM.
    IG: d3bel1o

  9. #449
    Active Member Two Rings n01's Avatar
    Join Date
    Feb 11 2012
    AZ Member #
    88076
    Location
    Newmarket/Canada


    19" tn4.

  10. #450
    Active Member Two Rings n01's Avatar
    Join Date
    Feb 11 2012
    AZ Member #
    88076
    Location
    Newmarket/Canada





    19" Tomason TN4 with 255/35/19

  11. #451
    Veteran Member Four Rings SteelyS6's Avatar
    Join Date
    Oct 29 2011
    AZ Member #
    83182
    Location
    Winnipeg Manitoba

    ^ Looks good ^

  12. #452
    Senior Member Two Rings eagledubg's Avatar
    Join Date
    Apr 13 2009
    AZ Member #
    41158
    My Garage
    02 b5 s4/02 s6
    Location
    Philadelphia

    supra what kind of wheels are these??


    Quote Originally Posted by supra_speed View Post
    19x10.5 et15

  13. #453
    Senior Member Two Rings 280zforce's Avatar
    Join Date
    Sep 03 2007
    AZ Member #
    20799
    Location
    Corona, CA

    I'm showing off my current wheels and also selling them... going down to 18s.

    FOR SALE: Forgestar CF5 - Deep Concave Wheels (rotary-forged)

    FRONT:
    19x9.5 ET +20 with 265/35 Continental Extreme Contact DW

    REAR:
    19x10 ET +20 with 275/35 Continental Extreme Contact DW

    COLOR:
    powder coated Anthracite Metallic Texture.
    ***10mm spacers included for Front wheels

    PRICE:
    -$1,750 with tires (value of ~$3,650 new)
    -$1,500 without tires (value of ~$2,550 new)

    CLICK HERE TO SEE MY AUDIZINE FOR SALE AD FOR THESE WHEELS




    SOLD - 2004 Audi AR (fully built 3L stroker, Tial 605s, Vast Tuned, etc) - 440 whp/448 tq on low boost with misfire issues
    SOLD - 2002 Audi A4 Avant (fully built 2.0L stroker, gt3071r & more)
    SOLD - 2001.5 Audi S4 Avant (RS6'd turbo Stg 3+) - 466 whp/474 tq on pump 91/100 blend
    SOLD - 1975 Datsun 280z efi ITB Stroker Turbo (monster track car)

  14. #454
    Registered Member One Ring
    Join Date
    Feb 07 2014
    AZ Member #
    143875
    Location
    CA

    Quick Question, Is anyone running 19x9.5 all around? I have a 05 S4, looking to do it all around, they have et40...need recommendations on tire sizes and spacers if needed...looking to get that little strech and flush look....thanks!

  15. #455
    Senior Member Two Rings pearlescent's Avatar
    Join Date
    Feb 14 2009
    AZ Member #
    38690
    My Garage
    05 allroad 6sp, 2010 Infiniti EX35
    Location
    Milford Michigan

    Quote Originally Posted by Racin2redline View Post




    Stock wheels no spacers will be adding 15mm soon. Yokohama Geolander ATS 225/60/17 (27.6in tall) max is probably 28in

    FYI this is about the biggest you can fit without rubbing lock to lock I also took Into account airing down for beach use.. So even if a bigger tire was possible it would probably rub the upright.

    Also there is slim choices for an allterrain tire close to stock sizes. Fortunately the Geolander is an amazing tire!

    A 16in rim with the right lower offset (ET32 or lower) would yield better tire results like a 215/65/17 general grabber AT2 and Bridgestone revos ect.
    Hey! Consider 20mm spacers on the twin spoke wheels, rather than 15mm. I found that 20mm gets the wheel arches nearly perfectly flush with the face of the wheel, but keeping all tire tread inside the wheel well.

    LOVE the meaty tires btw!
    -Matt
    Current: 05 allroad 2.7t 6spd
    Past: B6 S4 Cab 6spd, B5 A4 2.8 quattro 5spd

  16. #456
    Active Member One Ring Joelgrin's Avatar
    Join Date
    Feb 13 2014
    AZ Member #
    145212
    Location
    Loveland colorado



    This is the initial setup with H&R Race springs and Continental 235/40/18s

    The wheels are VOXX MB5 Mercedes replica wheels 18x9.5 with an offset of 30

    Only had to slightly roll the front fender lining and remove one of the upper screws for the inner front fender

    Then I Plastidipped the wheels black











    And then I decided to Plastidip the roof


  17. #457
    Senior Member Two Rings Audiudo's Avatar
    Join Date
    Jun 05 2009
    AZ Member #
    43374
    My Garage
    2003 ZX6-R
    Location
    New York

    ^You have a side profile pic?
    04.A6.S-Line.Team.A.C.E.

  18. #458
    Veteran Member Four Rings geeky's Avatar
    Join Date
    Nov 02 2008
    AZ Member #
    34851
    Location
    Boulder & Seattle

    Teaser.
    19x10 et-3 in the rear.



    Geeky - Allroad; Test Fit by Jinsan John Lee, on Flickr

    1989 Nissan 300ZX
    Lemons Race Car
    1999 Porsche 911 Carrera
    1-Off Widebody | LS1 Swap | AST 5200 2-way Remote Coilovers | blah blah blah
    2000 Mercedes Benz C230K
    The Daily | "VIP Build"
    2000 Audi A4 1.8T
    The New Track Build
    2006 Porsche 911 Carrera S
    LN Engineering 3.8L | H&R Suspension | IPD Intake

  19. #459
    Veteran Member Four Rings blkrhyno's Avatar
    Join Date
    Mar 24 2008
    AZ Member #
    26808
    My Garage
    2004 audi a6 2.7T 2005 Nissan
    Location
    Brooklyn, New York

    I scored a set of A8 w12 wheels 20x9 putting them on my allroad, I'm thinking of using 255/35/20 tires, what do you guys think ?

    Sent from my LG-LS980 using Tapatalk
    OEM + work in progress

  20. #460
    Veteran Member Four Rings ENDEE666's Avatar
    Join Date
    May 04 2007
    AZ Member #
    17761
    My Garage
    A6 2.7T 6MT Modded. Allroad 2.7T 6MT.
    Location
    LI,NY

    Quote Originally Posted by blkrhyno View Post
    I scored a set of A8 w12 wheels 20x9 putting them on my allroad, I'm thinking of using 255/35/20 tires, what do you guys think ?

    Sent from my LG-LS980 using Tapatalk
    Gonna need really big spacers, but should look good. I have 255/40/19 on mine. My net et is 16. I could probably still push them out further, another 5mm or so, maybe more. Any less and the large "curb protector" bead on my tires hit the rear bag. Tire was fine, but these Continentals have huge lips where the wheel sits..

    I think most A8 offsets are in the 40's. Like 43-45..
    01 A6 2.7T, blk/blk, 6MT, SSP Tuned!, 3,996 lbs w/ me, full weight, street tires, 29+lb wheels.
    Ran an 11.8 @ 119 at MIR - Sept 2008. FIRST A6 IN THE 11's!
    Also 04 Touareg 4.2 89k with 22x10s

  21. #461
    Active Member Two Rings powliuz's Avatar
    Join Date
    Mar 03 2011
    AZ Member #
    71791
    My Garage
    VW Golf MK2
    Location
    Aarhus/Dk-Kaunas/Lithuania

    3sdm 0.05 Et22 8.5J 18"

  22. #462
    Veteran Member Four Rings blkrhyno's Avatar
    Join Date
    Mar 24 2008
    AZ Member #
    26808
    My Garage
    2004 audi a6 2.7T 2005 Nissan
    Location
    Brooklyn, New York

    Quote Originally Posted by ENDEE666 View Post
    Gonna need really big spacers, but should look good. I have 255/40/19 on mine. My net et is 16. I could probably still push them out further, another 5mm or so, maybe more. Any less and the large "curb protector" bead on my tires hit the rear bag. Tire was fine, but these Continentals have huge lips where the wheel sits..

    I think most A8 offsets are in the 40's. Like 43-45..
    They are ET 46 so I was thinking of either a set of 25mm or 30mm spacers, the 30mm spacers would bring me to ET 16 like you. Here are the wheels in question.

    So my car will look like this soon
    OEM + work in progress

  23. #463
    Established Member Two Rings
    Join Date
    Jan 30 2013
    AZ Member #
    108567
    Location
    belvidere, illinois

    tire size?? looks perfect!

    Quote Originally Posted by allroad'n View Post
    18" tsw nuremburgrings.
    20mm spacers all around
    402'd roughly 20mm




    Sent from my DROID RAZR HD using Tapatalk 4

  24. #464
    Established Member Two Rings
    Join Date
    Jan 30 2013
    AZ Member #
    108567
    Location
    belvidere, illinois

    just a quick question for the masters on here. I've gotten everything figured out on my b6 s4, but this allroad is an entirely different beast. got a free set of 18x7.5 wheels from my buddy to use on my 2001 allroad. what size tire should i be looking at? they have 225/40's on them now, at only 7.5 wide, i don't want to get too wide of a tire and have that balloon look. will the 225/40's be ok (strictly summer setup) or should i be looking for a different size? any and all opinions would be greatly appreciated. pics will be coming soon. THANX FELLAS!

  25. #465
    Veteran Member Four Rings $teady$upreme's Avatar
    Join Date
    Feb 11 2004
    AZ Member #
    102
    My Garage
    2009 A3 2.0T Quattro S-Line
    Location
    Vancouver, BC Canada

    x7.5, size 225 is the perfect set up. 235 will be too wide and ballon already.
    99.5 A4 GT28RS 1.8TQSM Volcano Black & CW Acura Integra Type-R 99-0010
    IG:@steadysupreme
    Pics&Detail

    Go-Eurodyne/GT28RS/ATP/Siemens/Bailey/Blitzkrieg/FMIC/CMfx400/Fidanza/Greddy/Innovate/Walbro/Meth
    Footworks-BBS RGR/CCW/BilsteinPSS9/034/Stern/ASP/APR
    Misc-Porsche/S4rear/Rieger/Ecodes/V&S/Sparco/Podi/Blitz/AWE/Panzer

  26. #466
    Established Member Two Rings
    Join Date
    Jan 30 2013
    AZ Member #
    108567
    Location
    belvidere, illinois

    Thank you so much!! Thats what i was figuring, but i thought id ask those that may have more experiance with this platform. THANX!!

  27. #467
    Veteran Member Four Rings LowA4's Avatar
    Join Date
    Aug 04 2007
    AZ Member #
    20071
    My Garage
    00 S4, 01 Allroad
    Location
    Gardnerville, Nv.

    VMR VB3 19x10 et38. 23mm spacer front and 25mm in rear. 255/35 Dunlop sport maxx gt tires.


    Sent from my iPhone using Tapatalk
    C5 RS6
    Stage 3 b5 S4
    8P A3 quattro
    B6 usp A4
    C5 Allroad

  28. #468
    Active Member Two Rings
    Join Date
    Mar 07 2014
    AZ Member #
    152004
    Location
    Sthlm, Sweden

    Do you guys think that 8Jx19 ET35 255/35/19 will fit on my A6 3.0q S-line stock suspension and without any fixing the fenders?


    Skickas från min iPhone via Tapatalk

  29. #469
    Active Member Two Rings
    Join Date
    Mar 07 2014
    AZ Member #
    152004
    Location
    Sthlm, Sweden

    Quote Originally Posted by Brunu88 View Post


    A6 C5 + AMG wheels 18" 225-35 8.5" front and 255-40 back 8.5"

    Low = photoshop LOL
    What ET do you have? And does it scratch?


    Skickas från min iPhone via Tapatalk

  30. #470
    Active Member Two Rings
    Join Date
    Aug 01 2013
    AZ Member #
    120109
    Location
    dickinson nd

    Quote Originally Posted by milkycereal View Post
    tire size?? looks perfect!
    18 x 8.5

    245/14/18

    its the exact same dimension as stock i think.. maybe an inch wider. i wish the pic was bigger .

  31. #471
    Stage 3 Forum Advertiser Four Rings VMRWheels's Avatar
    Join Date
    Jun 14 2005
    AZ Member #
    6871
    Location
    Anaheim, CA

    Quote Originally Posted by LowA4 View Post
    VMR VB3 19x10 et38. 23mm spacer front and 25mm in rear. 255/35 Dunlop sport maxx gt tires.


    Sent from my iPhone using Tapatalk
    That looks great!

    Brandon @ VMR Wheels
    [email protected] | 714.442.7916 Ext 108 | www.velocitymotoring.com| Instagram | | | Blog

  32. #472
    Senior Member Three Rings A6Rick's Avatar
    Join Date
    May 31 2011
    AZ Member #
    76274
    Location
    New York

    Quote Originally Posted by Joelgrin View Post


    This is the initial setup with H&R Race springs and Continental 235/40/18s

    The wheels are VOXX MB5 Mercedes replica wheels 18x9.5 with an offset of 30

    Only had to slightly roll the front fender lining and remove one of the upper screws for the inner front fender

    Then I Plastidipped the wheels black











    And then I decided to Plastidip the roof

    Hey are you using spacers? If so how much mm'5? Nice poke

    Sent from my HTCONE using Tapatalk

  33. #473
    Active Member One Ring Joelgrin's Avatar
    Join Date
    Feb 13 2014
    AZ Member #
    145212
    Location
    Loveland colorado

    A6 rick. Thanks!

    No spacers on those voxx wheels. I was going to space the back 5mm. Never did. I just got new mercedes wheels though! I'll post specs later but here is some pics.








  34. #474
    Senior Member Three Rings A6Rick's Avatar
    Join Date
    May 31 2011
    AZ Member #
    76274
    Location
    New York

    Quote Originally Posted by Joelgrin View Post
    A6 rick. Thanks!

    No spacers on those voxx wheels. I was going to space the back 5mm. Never did. I just got new mercedes wheels though! I'll post specs later but here is some pics.







    Nice. You lowered it though right? Coilovers or springs?

    Sent from my HTCONE using Tapatalk

  35. #475
    Senior Member Three Rings A6Rick's Avatar
    Join Date
    May 31 2011
    AZ Member #
    76274
    Location
    New York

    Simple setup, but more mods to come.

    18" RS4's 225-40 18.
    Stock height but soon change!




    Sent from my HTCONE using Tapatalk

  36. #476
    Active Member One Ring Joelgrin's Avatar
    Join Date
    Feb 13 2014
    AZ Member #
    145212
    Location
    Loveland colorado

    A6 Rick.
    H&R Race springs. I can't believe how little body roll it has for being a big car. really tight.
    and with the right wheels and offset. it sits soooo pretty.

    I love seeing everyones setups by the way. being new to audizine I can't wait to see it all.

  37. #477
    Senior Member Three Rings A6Rick's Avatar
    Join Date
    May 31 2011
    AZ Member #
    76274
    Location
    New York

    Quote Originally Posted by Joelgrin View Post
    A6 Rick.
    H&R Race springs. I can't believe how little body roll it has for being a big car. really tight.
    and with the right wheels and offset. it sits soooo pretty.

    I love seeing everyones setups by the way. being new to audizine I can't wait to see it all.
    Nice. How's the ride in comparison to stock height? I sometimes hear it's a bit hard. Also im thinking about doing a 1.5" drop. Nothing too crazy as I live in pothole infested NYC.

    Sent from my HTCONE using Tapatalk

  38. #478
    Established Member Two Rings
    Join Date
    Sep 07 2012
    AZ Member #
    100090
    Location
    Scott's land

    AH Flachwerk modified H+R Race coilovers,9x20 Bentley Mulliners,245/30x20 michelin pilot supersports,10mm spacers all round for now

  39. #479
    Active Member Two Rings
    Join Date
    Apr 09 2014
    AZ Member #
    179861
    Location
    Brentwood NY

    Quote Originally Posted by lostcause View Post
    2002 A6 4.2

    Full polish Schmidt TH-line
    18x10.5 /// ET1 /// 235/40/18
    18x12 /// ET8 /// 265/35/18

    ST Coilovers

    Do you think 20x10.5 et20R et15F is to aggressive ? On a 2004 Audi Allroad 2.7t

  40. #480
    Active Member Two Rings
    Join Date
    Apr 09 2014
    AZ Member #
    179861
    Location
    Brentwood NY

    Do you think 20x10.5 et20R et15F is to aggressive ? On a 2004 Audi Allroad 2.7t

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2025 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.