5x112 wheel pattern to 5x114

[breck]

Anyone know of the best way to change bolt pattern to a 5x114 ? I keep turning up wheels i like but theres nothing in a 5x112! Any suggestions i dont want to change with spacers though is there a easy way but not so costly. Thanks Breck

[rollaphillie]

wobble bolts http://fifteen52.us/shop-2/#ecwid:ca...roduct=1641106

[vbrad26]

wobble bolts!

[vbrad26]

bah ninja'd haha

[Peter1.8t]

Wait what? You mean change 5x114 wheels to 5x112? Or the other way around?

[djsp00kyk]

What about if you need to run a spacer just like a 5mm. Does anybody know if someone makes a hubcentric 5mm spacer. I know the usable length on some wobble bolts is around 31-33mm, which would allow for a small spacer. My wheels are et45 so i really need to run a spacer but dont want to go the route of an adapter because they are too thick. I am on sport suspension and do not want to go lower beacause it is my DD and the country backroads suck on my 100 mile a day commute. Would a stud conversion and wobble nuts be the best option for spacers or does someone have a better setup because i could really use a 10 to 12mm spacer but i could live with 5mm.

[Gil2.0T]

Extend the wobble bolts by a shop. Then you could run whatever spacers you want.

[24v256]

Get studs and wobble nuts.

[djsp00kyk]

Get studs and wobble nuts.

That seems like the best route to me as well. Thanks.

[VegasAIV]

you can run 5mm spacers with wobbles just fine

[swoardrider]

I've had a few sets of wheels drilled out to 112 with no issues at all. Any good wheel repair shop can usually do this if they have the machine and tooling. I'd suggest you call around the East Coast, or contact Rotiform

[VMRWheels]

Redrilling from 5x114.3 -> 5x112 is fairly common, and can be done cleanly if the shop knows what they are doing. Personally, I would prefer a redrill to running wobble bolts.

[SEXICÄN]

does anyone make longer wobble bolts?