B8/B8.5 VCDS & Hidden Menu: The Complete List

[rlarsen]

Where did you buy the cable - from Ross Tech ??

We have a seller here in Denmark who is selling a pirat version that very well looks like the real one.

[Yukoncole]

Mine looks like that!!

[scottyuk]

So does mine ... and mine is genuine. That's the thing with fakes - they make them look like the real thing ;)

[audiBMWfan]

Did anybody with a B8.5 car succeed with the voltmeter mod? I was able to do other mods, including the hidden (AKA green) menu, and used the menu to change the recommended settings, but I cannot access the voltmeter. I am looking at the car settings menu with the oil level selection -- is this the right place?

[Moviela]

Yea it it suppose to be! I tried it plugged in and not plugged in. Plus tried 2 USB ports. I'm a newbie to this software, maybe I'm making mistake??

Did you plug in the cable before loading the software and USB driver? DOH!

Unplug the cable and remove the software <Control Panel><Programs and Features><VCDS......> right click and Uninstall. Then <Windows Driver Package - Ross-Tech Driver......>and uninstall this. Turn off computer and restart.

Reinstall the software and the USB driver. Reboot. Open Ross-Tech VCDS. Select <Options> In Select Port box make sure USB radio button is selected. Now you can plug in the cable to your USB port. Click the <Test> button. When finished click the <Save> button. Press <ESC> to return to the main menu screen. Plug the cable into the jack on the car. With your foot off the brake pedal, push in the key. Now run auto-scan. Now you are working.

I think most genuine cables have a velcro cord management strap that has Ross-Tech woven into the fabric. The clones omit this.

[rs182]

Nope. Have all the coding and such set but cannot find it in the MMI.

[audiBMWfan]

Nope. Have all the coding and such set but cannot find it in the MMI.

Is this in reply to my B8.5 voltmeter mod question? If so, looks like it is not just me, but the mod does not work for B8.5

[Gotchaa]

Is this in reply to my B8.5 voltmeter mod question? If so, looks like it is not just me, but the mod does not work for B8.5

Nobody has it working, my radar detector has a setting to show this so I am content, will post if I figure it out

Sent from my ASUS Transformer Pad TF700T using Tapatalk HD

[kenny kustom]

I have done quite a few of the mods on here.
I just cannot get the beeping to stop when the car is running, and the door is open.
I have disabled all key alerts, but its still beeping.
Running or not. If the ignition is on, and the door is open.
2103 q5

[mattchat]

2103 q5

2103.....dang post a picture of that baby, does it fly?








....just razzing you, the beeping by the way no one has gotten around on the new cars. Just hit the up or down rocker switch on the right steering wheel instrument panel switch.

[kenny kustom]

Whoops......
2013

[MVcycleart]

Spent some time with a board member this weekend adding:

anti-wink
fogs indepented of high beems
fogs on without decreasing intesity of DRL
disengage parking brake without pressing brakes (6MT)
after wipe of window wipers removal
windows up with remote (couldn't get the down feature to work)

and i just wanted to say thanks to everyone that has contributed to this thread. some of these things are minor, but i love having the ability to makes these changes. Shout out goes to whtcand for the help.

[Kczach]

Spent some time with a board member this weekend adding:

anti-wink
fogs indepented of high beems
fogs on without decreasing intesity of DRL
disengage parking brake without pressing brakes (6MT)
after wipe of window wipers removal
windows up with remote (couldn't get the down feature to work)

and i just wanted to say thanks to everyone that has contributed to this thread. some of these things are minor, but i love having the ability to makes these changes. Shout out goes to whtcand for the help.

To get the windows to go down with the remote make sure that the pinch protection hasn't been tripped. i.e. make sure that all the windows go up with a single touch. Mine stopped going up with the remote and found this out by happenstance.

[theswoleguy]

Spent some time with a board member this weekend adding:

anti-wink
fogs independent of high beams -did this
fogs on without decreasing intensity of DRL-where is this at
disengage parking brake without pressing brakes (6MT)
after wipe of window wipers removal-Wtf is this
windows up with remote (couldn't get the down feature to work)-strange mine works both ways, check pinch over touch up with the button.

antiwink-left it alone kind of like it

fogs independent of high beams -did this

fogs on without decreasing intensity of DRL-where is this at?

disengage parking brake without pressing brakes (6MT)-did this on the dsg

after wipe of window wipers removal-Wtf is this

windows up with remote (couldn't get the down feature to work)-strange mine works both ways, check pinch over touch up with the button.

Sent from my DROID BIONIC using Tapatalk 2

[SteveYem]

antiwink-left it alone kind of like it

fogs independent of high beams -did this

fogs on without decreasing intensity of DRL-where is this at?

disengage parking brake without pressing brakes (6MT)-did this on the dsg

after wipe of window wipers removal-Wtf is this

windows up with remote (couldn't get the down feature to work)-strange mine works both ways, check pinch over touch up with the button.

Sent from my DROID BIONIC using Tapatalk 2

RE: After-wipe - If I remember correctly, when you use your windshield washer feature it sprays and wipes three times, then the wipers stop for a few seconds and swipe once more. This mod eliminates that extra wipe. Someone correct me if I am wrong....I know I did this mod, but I'm not 100% sure that the extra wipe occurred when using the windshield washer feature.

[mattchat]

That is correct. I honestly like it, 9 times out of 10.

RE: After-wipe - If I remember correctly, when you use your windshield washer feature it sprays and wipes three times, then the wipers stop for a few seconds and swipe once more. This mod eliminates that extra wipe. Someone correct me if I am wrong....I know I did this mod, but I'm not 100% sure that the extra wipe occurred when using the windshield washer feature.

[MVcycleart]

Thanks for the tips on the window, I will check that out. I thought it was kinda strange since I ran into the same issue on a previous a6 I had.

As for the DRL intensity, I like to drive around with the fogs and DRL's on, and I like the fact the LED's stay bright. I know it is a little silly, but who on here doesn't have little things they like about their cars.

[MVcycleart]

That is correct. I honestly like it, 9 times out of 10.

Mattchat, I noticed you did the OE springs, and I was wondering how much drop you saw after you we're finished? I am kicking around the idea of getting then since I had the VMR's installed.

[mattchat]

Drop is just right, about 30mm.

Mattchat, I noticed you did the OE springs, and I was wondering how much drop you saw after you we're finished? I am kicking around the idea of getting then since I had the VMR's installed.

[Stereodude]

Drop is just right, about 30cm.

That's quite the serious drop. I'm surprised you're not dragging "frame" after dropping the S4 just short of a foot.

[mattchat]

fixed......30mm

That's quite the serious drop. I'm surprised you're not dragging "frame" after dropping the S4 just short of a foot.

[allsunday]

here is the one thing I can't figure them out,

The MMI used to pop slide out for the heat seat and ac temperature setting change disappear
(when adjusting the heater, fan controls or heated seats, the pop slide out MMI info screen on both driver and passenger side)
no more pop slide out......

Is there anything I missed?
or any way to reset everything back to factory,
so I can re do everything again?

2012 B8 S4 Canada,
Ross-Tech cable.......

[rlarsen]

Did you set both bit 3 and bit 4 on Byte 1 in [08 - Auto HVAC] ??

http://audienthusiasts.com/VagCom_AuxVent.html

[allsunday]

I was @@?
but I changed back (due to "Enable Auxiliary ventilation" wasn't working on my car)
Are both bit3 and bit4 related to the pop out ? (when adjusting the heater, fan controls or heated seats, the pop slide out MMI info screen on both driver and passenger side)

thank you for for your time !!

[rlarsen]

I was @@?
but I changed back (due to "Enable Auxiliary ventilation" wasn't working on my car)
Are both bit3 and bit4 related to the pop out ? (when adjusting the heater, fan controls or heated seats, the pop slide out MMI info screen on both driver and passenger side)

thank you for for your time !!

I just quote what David has documented in his DIY - and it read:

Go to Byte 1 and check off bit 3. I'm unsure of the 2G but for the 3G you have to have bit 4 selected in order to control the heater controls on the MMI screen.

MMI 2G = bit 4 doesn't need to be set.
MMI 3G = bit 4 need to be set.

[patricklcc]

I've been trying to compile a complete list of VCDS mods specific for our S4 cars. I started going through the B8 A4 Cool VAG-COM codes thread but the info is spread over 30 pages and repeats or is trivial. AudiEnthousiasts has also started to put a list together organized by category for the A4. I like his idea but I think there's a need for a straight list of cool VAG-COM mods specific to our S4 and a detail how-to consice in one document.



Please note, I'm not trying to steal or take credit for these mods, I've simply used the information available throughout the web and tried to bring them in a central place. Your help in filling in a few blanks and validating my info would be appreciated.

*Suggestion: Print this and check off the mods you've activated and store it with your owner's manual - Will come handy when you need to re-do the coding after an ECU flash.

Here's the list I've compiled so far:

• Disable After-wipe of windscreen wipers
• Disable amber corner lights
• Disable amber side markers
• Disable Key warning (keyless models)
• Disable LED 'wink' on turn signal
• Disable "Lights are on" warning
• Disable NAV & Phone warning messages while entering data at speed
• Disable Seatbelt Chime
• Enable Adaptive brake lights
• Enable Ambient Interior Lighting Control
• Enable Automatic Gear selection shown in DIS
• Enable Automatic Hill Hold Assist 'lite'
• Enable Auxiliary ventilation
• Enable Battery meter
• Enable DIS with Efficiency Program
• Enable Double Disarm Beep
• Enable DRL Selectable via MMI
• Enable DRL
• Enable Euro parking lights that turn on signal at night
• Enable fog lamp to come on for the same side as that turn signal
• Enable Front Turn Signals as Parking lights
• Enable Gauge Test/Needle Sweep
• Enable Hidden menu in MMI
• Enable Import CDs to MMI's HD
• Enable Independent Fogs control with high beams
• Enable Lap Timer
• Enable LEDs remain bright for parking lights
• Enable Rear Tail Lights on with DRLs
• Enable Release Parking Brake without putting foot on Brake
• Enable Release Parking Brake without putting seatbelt
• Enable Remote Operation windows&sunroof
• Enable Reverse mirror tilt
• Enable Speed through MMI
• Enable TPMS
• Enable VIM on MMI
• Set Audi parking system - Switch OFF Speed
• Set Custom ADS settings
• Set Headlight washer - cycles
• Set Headlight washer - duration
• Adjust Consumption in DIS
• Adjust LED Brightness

Audi A4/S4 B8
VCDS (VAG-COM) codes

Disable After-wipe of windscreen wipers
[09 – Cent. Elect.] [Coding - 07] -> [Dropdown] -> "x ** 8K1 955 119 ** WWS xxxx" -> Long Coding Helper -> Byte 1
Bit 3 - Remove check mark (1 = active)
________________________________________
Disable amber corner lights
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 10
Submodule 0
Bit 3 - Set to 0 to disable amber side markers (U.S. vehicles)
________________________________________
Disable Key warning (keyless models)
[46 – Central Conv.] [Coding - 07] -> Long Coding Helper -> Byte 9
Bit 7 set to 0 (Uncheck)
________________________________________
Disable LED 'wink' on turn signal
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 3
Bit 2 - LEDs remain at full brightness with parking lights (1 = active)
Bit 7 - Turn off LED-strip DRLs with indicators (1 = active)
________________________________________
Disable "Lights are on" Warning
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 5
Bit 3 - Set to 0 to disable "lights are on" warning when you open the door.
________________________________________
Disable NAV & Phone warning messages while entering data at speed
[5F - Information Electr.] -> Adaptation -> Set channel 2 & 3 to 250
________________________________________
Disable Seatbelt Chime
[17 - Instruments] [Coding - 07] -> Long Coding Helper -> Byte 0
Bit 2-4 – Seat Belt Warning inactive
________________________________________
Enable Adaptive brake lights
[46 - Comfort System] [Coding - 07] -> Long Coding Helper -> Byte 8
Bit 0 – Emergency Brake Flashing via Turn Lights active (1 = active)
Bit 1 – Emergency Brake Flashing via Brake Lights active (1 = active)
________________________________________
Enable Ambient Interior Lighting Control
[Hidden menu] [car] [carmenuoperation] [interior light] Set to 5
[Hidden menu] [car] [cardevicelist] [interior light] Enable
Reset MMI
________________________________________
Enable Automatic Gear selection shown in DIS
[02 – Auto Trans] [Adaptation – 10]
Select “Single Gear Display” from top channel drop down menu
Select “D on/S on” from New value drop down menu
________________________________________
Enable Automatic Hill Hold Assist ‘lite’
[03 - ABS brakes][Security Access - 16] (Enter code presented by program)
[Coding – 07] -> Long Coding Helper -> Byte 1
Bit 6 set to 1 to enable hill hold assist.

http://www.audizine.com/forum/showth...r-the-A4/page2
________________________________________
Enable Auxiliary ventilation
[5F - Information Electr.] [Coding - 07] -> Long Coding Helper -> Byte 6
Bit 1 – Set to 1
[Hidden menu] [car] [cardevicelist] [Auxiliary heating] Enable
[08 - Auto HVAC] [Coding - 07] -> Long Coding Helper -> Byte 1
Bit 3 – Set to 1
Bit 4 – Set to 1
________________________________________
Enable Battery meter
[Hidden menu] [car] [cardevextdevicelist] [Battery] Enable
[Hidden menu] [car] [carmenuoperation] [Battery] Set to 5
Reset MMI
or
[56 - Radio] -> Adaption -> Channel 39, add 16 to your value
________________________________________
Enable DIS with Efficiency Program for MY2010+ (Not a complete Program without the Start/Stop System)
[17 - Instruments] [Adaptation - 10] -> Channel 77
change 0 to 255
________________________________________
Enable Double Disarm Beep
[46 - Central Conv.] [Adaptation - 10] -> Channel 63
Add 4
________________________________________
Enable DRL Selectable via MMI
[09 – Cent. Elect.] -> [Coding – 07] -> Long Coding Helper -> Byte 3
Bit 5 set to 1
________________________________________
Enable DRL
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 2
Bit 1 = DRL via Front Side markers
Bit 2 = DRL via High Beams
Bit 3 = DRL via Fogs
Bit 4 = DRL via LEDs
Bit 6 = DRL via Side markers
Bit 7 = DRL via Tail lights
________________________________________
Enable Euro parking lights that turn on signal at night
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 9
Bit 0 - Set to 1
________________________________________
Enable fog lamp to come on for the same side as that turn signal
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 4
Bit 0 - Check the box or change :Bit 0 set to 1
________________________________________
Enable Front Turn Signals as Parking lights
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 10
Bit 0- Check the box or change :Bit 0 to 1
Once the change has been made you can enable the front turn signals as DRL's by making the following change:
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 2
Bit 6 - Check the box or change :Bit 0 set to 1
________________________________________
Enable Gauge Test/Needle Sweep
[17 - Instruments] [Coding - 07] -> Long Coding Helper -> Byte 1
Bit 0 - Check the box for "Gauge Test/Needle Sweep active"
________________________________________
Enable Headlights on all the time
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 4
Bit 5 - Check the box or change :(Bit 5 Set to 1)
________________________________________
Enable Hidden menu in MMI
[5F - Information Electr.]
[Adaptation - 10] -> Channel 6
change 0 to 1
Use this hidden menu at your own risk.
Caution: Keep away from the "Bootloader"
________________________________________
Enable Import CDs to MMI's HD
[Hidden menu]
Main/Diagnose/Settings
Import Media
Set to 4 of 4 "Copy/Ripping"
________________________________________
Enable Independent Fogs control with high beams
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 4
Bit 1 – (Front) Uncheck the box or change :Bit 1 to 0
Bit 2 – (Rear) Uncheck the box or change :Bit 2 to 0
________________________________________
Enable Lap Timer
[17 - Instruments] [Coding - 07] -> Long Coding Helper -> Byte 1
Bit 3 - Check the box for "Lap Timer active"
______________________________________
Enable Remote Operation Windows and Sunroof
[46 - Cent. Conv.] [Coding - 07] -> [Long Coding Helper] Byte 2
Bit 2 - Set to 1
______________________________________
Enable Rear Tail Lights on with DRLs
[09 – Cent. Elect.] [Coding - 07] -> Long Coding Helper -> Byte 2
Bit 7 - DRL's via Tail Lets Active (1 = Active)
________________________________________
Enable Release Parking Brake without putting foot on Brake
[53 - Parking Brake][Security Access - 16] (Enter code presented by program)
[Adaptation - 10] -> Channel 4 Set to 0
________________________________________
Enable Release Parking Brake without putting seatbelt
[53 - Parking Brake][Security Access - 16] (Enter code presented by program)
[Adaptation - 10] -> Channel 7 Set to 0
________________________________________
Enable Reverse mirror tilt
[52 Door Elect, Pass.] -> [Coding - 07] -> [Long Coding Helper] -> Byte 4
Bit 4 and Bit 2 set to 1
________________________________________
Enable Speed through MMI
[56 - Radio] [Adaptation - 10] -> Channel 02, Set to 1
Does not work if NAV equiped
________________________________________
Enable TPMS
* You need the 1AT ABS unit – check your stickers (1AS does not work)
[Hidden menu] [car] [cardevicelist] [RDK] Enable
[Hidden menu] [car] [carmenuoperation] [Tires Air Pressure Control] Set to 5

[03 - ABS Brakes]
[Security Access - 16] (probably with login code: 61378)
[Coding - 07] -> Long Coding Helper -> Byte 1
Bit 3 - Tire Pressure Monitoring (PR-7K6) active (1 = active)

The TPMS need to be enabled in the Instrument Cluster:
[17 - Instruments]
[Coding - 07] -> Long Coding Helper -> Byte 4
Bit 0 - Tire Pressure Monitoring (TPMS) installed (1 = active)
Reset MMI
________________________________________
Enable VIM on MMI
[5F - Information Electr.] [Advanced ID - 1A] Note 1st Serial number
[Security Access] Enter Digits 6, 13, 10, 14, 11 of the 1st Serial number
[Adaptation - 10] -> Channel 48
Set to 255
Reset MMI
________________________________________
Set Audi parking system - Switch OFF Speed
[10 - Park/Steer Assist] [Adaptation - 10] -> Channel 23
Set to 20 (max value in km/h)
________________________________________
Set ADS to specific preset Comfort, Auto, Dynamic or Individual
[09 – Cent. Elect.][Security Access - 16]
[Adaptation - 10] -> Channel 63
Set to 01 - Comfort, 02 - Auto, 03 - Dynamic or 04 - Individual
[Adaptation - 10] -> Channel 64
Set to 01 - Comfort, 02 - Auto, 03 - Dynamic or 04 - Individual
[Adaptation - 10] -> Channel 65
Set to 01 - Comfort, 02 - Auto, 03 - Dynamic or 04 - Individual
[Adaptation - 10] -> Channel 66
Set to 01 - Comfort, 02 - Auto, 03 - Dynamic or 04 - Individual
*Note all four channels needs to be set to the same value.

________________________________________
Set Headlight washer - Duration
[09 – Cent. Elect.]
[Security Access - 16] [Adaptation - 10] -> Channel 6
change to e.g. 500
________________________________________
Set Headlight washer - Cycles
[09 – Cent. Elect.]
[Security Access - 16] [Adaptation - 10] -> Channel 26
change to e.g. 10
________________________________________
Adjust Consumption in DIS
[17 - Instruments]
[Adaptation - 10] -> Channel 3
change 100 to xxx (see samples below)

Sample 1 - Calculation based on volume per distance (e.g. l/100km):
DIS: 9,3 l/100 km.
Real: 9,8 l/100 km. (100 * 9,8 / 9,3 = 105,38)
Channel 3 will be changed from 100 to 105

Sample 2 - Calculation based on distance per volume (e.g. MPG):
DIS: 23 MPG.
Real: 24 MPG. (100 * 23 / 24 = 95,83)
Channel 3 will be changed from 100 to 96
________________________________________
Adjust LED brightness
[09 – Cent. Elect.] [Security Access - 16] (enter security code. One of the default codes is- 20113)
[Adaptation - 10] -> Channel 3
Set between 5 and 100
________________________________________

Again, I take no credit for this information, most of the above is available on these forums and specialty websites as well as Ross-Tech's support pages. I only wanted to group all the info of the pertinant VCDS mods to our S4.

Not all the above has been verified, I'll be happy to re-edit this post to correct any info.
Oh and I'm not responsible for any screw ups this causes, good luck.

Can I get a few volunteers to nominate this post as a sticky?

I'm from Hong Kong, I would like to know whether I can follow this to set my S5 sportback (V6 3.0)?

[rlarsen]

I'm from Hong Kong, I would like to know whether I can follow this to set my S5 sportback (V6 3.0)?

Yes, it should work on a S5 Sportback too...

[allsunday]

Thank you for your help, it works :).

i forgot to put the MMI 3G = bit 4 back

I just quote what David has documented in his DIY - and it read:



MMI 2G = bit 4 doesn't need to be set.
MMI 3G = bit 4 need to be set.

[Ovrboost2004]

Hi i was doing some changes today but couldnt figure out the ambiant lighting? What is the hidden menu and where is it?

[Schadenfreude]

Hi i was doing some changes today but couldnt figure out the ambiant lighting? What is the hidden menu and where is it?

Hidden Menu has to be enabled in 5F Information Electr. It's listed on the first page in the list

[danemgarner]

Thanks for all the info!

[thedollardoctor]

Trying to reset some settings in the steering assist module and it will not let me do so without a security code. I called my head tech at the dealership and he said they don't get these anymore, they are just automtically populated by VIN number when they run the software flashes at the dealership. He and i discussed resetting some steering adaptations to look for a band-aid fix for the 2013 electric steering assist issues.

Anyone have any ideas as to how to determine the proper security code? When I hit it I also get a message that says to check the "service manual" for the code. I have actually purchased a full service manual for my car (because i like to have them) but it is taking FOREVER to download as it's a 3.7GB file!

Anyone have any thoughts on this.

[audi_s5]

Try 20113

[2010drive]

What is everyone putting there LED britness too? I put mine on 100

[13S4]

What is everyone putting there LED britness too? I put mine on 100

It only changes the brightness when the headlights are on.. It doesn't change the DRL brightness since it's already set at 100%. The beams are suppose to dim when the headlights come on, and it actually looks stupid having them brighter than factory. I did not realize this fact when I originally changed mine and have since reversed the mod. The effectiveness of the LED lights when your headlights are on is negligible. The light washes out everywhere and is really distracting to oncoming drivers. I strongly recommend putting it no higher than 40%.

[2010drive]

It only changes the brightness when the headlights are on.. It doesn't change the DRL brightness since it's already set at 100%. The beams are suppose to dim when the headlights come on, and it actually looks stupid having them brighter than factory. I did not realize this fact when I originally changed mine and have since reversed the mod. The effectiveness of the LED lights when your headlights are on is negligible. The light washes out everywhere and is really distracting to oncoming drivers. I strongly recommend putting it no higher than 40%.

Thanks for the heads up...I thought it was making them brighter with the headlights off. On a side note...I seem to have messed up my high beems and can't get them to stay on without holding the lever back. Anyone know how to fix this? They work when I put "high beem assist installed" on but I get an error message everytime I turn the ignition on because I don't have high beem assist.

[Wan_Man]

Please can someone check these codes for me.
I have a S4 MY2013 Premium Canadian with Sport diff
I made some changes that should only be done to a MY2012 or older and I never wrote down the default codes


Set ADS to specific preset Comfort, Auto, Dynamic or Individual
[09 – Cent. Elect.][Security Access - 16]

[Adaptation - 10] -> Channel 63 I have it set to "0"

[Adaptation - 10] -> Channel 64 I have it set to "218" I know this one is correct

[Adaptation - 10] -> Channel 65 I have this one set to "0"

[Adaptation - 10] -> Channel 66 I have this one set to "15"

Please can someone confirm that I have the correct factory default codes
Thanks
Trevor

[rlarsen]

Please can someone check these codes for me.
I have a S4 MY2013 Premium Canadian with Sport diff
I made some changes that should only be done to a MY2012 or older and I never wrote down the default codes


Set ADS to specific preset Comfort, Auto, Dynamic or Individual
[09 – Cent. Elect.][Security Access - 16]

[Adaptation - 10] -> Channel 63 I have it set to "0"

[Adaptation - 10] -> Channel 64 I have it set to "218" I know this one is correct

[Adaptation - 10] -> Channel 65 I have this one set to "0"

[Adaptation - 10] -> Channel 66 I have this one set to "15"

Please can someone confirm that I have the correct factory default codes
Thanks
Trevor

If you have used VCDS you can see the changes (old => new) in "C:\Ross Tech\VCDS\Debug"

[Wan_Man]

If you have used VCDS you can see the changes (old => new) in "C:\Ross Tech\VCDS\Debug"

Thanks I will go and have a look. I have an old 908 Vagcom cable so not sure I will see anything

[Wan_Man]

just as I thought I have no log.
If someone would be so kind as to check these on a 2013 and let me know that would be great
Thanks