Supercharged Badge Mounting Template

[Brooklyn]

Anyone have this thing scanned in or know where I can find it? Dealership I purchased my car from didn't have the badges in stock to mount on the car and had them mailed to me. Package arrived today but doesn't have the template, which I thought all the dealership stocked badges did. I'll screw this up without the template for sure. Let me know if there's a place I can download this thing. Tried doing a search, but once again the search function on this site is assuseless.

[akim_hobo]

Subscribed. Looking for the same thing before I pull the trigger on a couple of badges. If I were a sponsor selling these things, I'd get my hands on one and make use of the photocopier. *hint& *hint*

[NWS4Guy]

Well here is a pic of the new ones which come with the template:



Many of us just used blue painters tape and did it a certain distance from the crease and leading edge of the door using a measuring tape.

[wwhan]

Use around 2" fender edge side and around 2.5" down from the top (metal crease).

[Brooklyn]

Thanks fellas. May have to try that, but would much rather have the idiot proof template if anyone can find it online. No idea why mine didn't come with it unless the dealer just assumed it was trash or something and tossed it.

[wwhan]

I bought the badges from a dealer, they did not gave me a template.

[SPR415]

does ech tunnig give u the template?

[Brooklyn]

Recall a post from ECS saying their badges don't come with the template. Still holding out hope someone here will scan it in for the collective before I start slapping painter's tape all over the place this weekend.

[Dan@EuropaParts]

hey Folks, we just posted the Supercharged templates here.

[Brooklyn]

Outstanding. I went ahead and used the painter's tape method, but this will go a long way for those folks who want to do it 100% right.

[K1speeder]

Anyone have this thing scanned in or know where I can find it? Dealership I purchased my car from didn't have the badges in stock to mount on the car and had them mailed to me. Package arrived today but doesn't have the template, which I thought all the dealership stocked badges did. I'll screw this up without the template for sure. Let me know if there's a place I can download this thing. Tried doing a search, but once again the search function on this site is assuseless.

Just out of curiosity, how much did you pay for the badges at the dealer?

[Brooklyn]

Got it for free when I requested it the day I picked up the car. No price tag attached to it when I got it in the mail. Believe I've seen something in the $30's or low $40's advertised as a decent price, but I might be off.

[Seinsmeld13]

My water pump failed, dealer felt sorry for me there was no charge for the badges or install.

[Matt@EuropaParts]

We have them for $31.95 each (http://www.europaparts.com/carbon-fi...4f0853601.html)

[DeanMTL]

Those are some dirty fingernails

[svander]

I know this is old and people may not care but the template is here: http://www.ecstuning.com/Search/Supe...dge/ES1904512/ Click on "Installation Instructions" - Courtesy of ECS Tuning.

[danj1111]

I didn't realize they had the template online. MrXpresident gave me the idea of using some tape to get the lines right before taking off the V6T badge.
I lined up the bottom, and the edge towards the back, then removed the V6T, goo-gone'd it, and stuck the new one on lined up with the tape. All in all, took about 5 minutes per side from start to finish.