breyton wheels

[bksplaya]

i have a 2000 audi s4 and was wondering in a set of breyton magic wheels would fit on my car

looked at some forums and they are known for BMW didnt see anything for audi's and on tiretrack.com i put my car in and it didnt show me any breyton wheel

well the question is : will they fit and be good on my car

if anyone know i would be great full if u can email me at [email protected]

[m-avant]

I have Breytons on my M3, they're OK. Breyton is a BMW tuner, which is why they won't show up on a product search for your Audi. The BMW PCD (bolt pattern) is 5x120, and vary in offset - depending on the car. You can "make" them fit, by using adapters or having the wheels re-bored from 5x120 (BMW PCD) to 5x112 (Audi PCD). Then you will need to make sure that the wheel center bore and offset is correct for your car.

I would go with wheels that fit your S4 out of the box.

[Doc@tirerack]

I have Breytons on my M3, they're OK. Breyton is a BMW tuner, which is why they won't show up on a product search for your Audi. The BMW PCD (bolt pattern) is 5x120, and vary in offset - depending on the car. You can "make" them fit, by using adapters or having the wheels re-bored from 5x120 (BMW PCD) to 5x112 (Audi PCD). Then you will need to make sure that the wheel center bore and offset is correct for your car.

I would go with wheels that fit your S4 out of the box.

+1

BMW hub is 72.56mm, Audi is 57.06mm
Most Breyton wheels that "regular" 3 series will have a close enough offset to an A4 wheel that after an adapter the wheel would stick out too far. Unless you know a good shop that could redrill and make up the rings, I'd same yourself some greif and look at another wheel

[bksplaya]

thanks for the help so what are good wheels im lokking for deep dish spoke rims

[m-avant]

If you can't find Audi specific wheels - Mercedes wheels can be fitted easier on your S4 than BMW wheels. I had MAE monoblocks, with a decent dish / offset on my previous avant. I had to have a machine shop re-bore the bolt holes, and stay with a rather conservative suspension setup to keep the fitment.