OEM 18" TT Turbine Wheels

[tmgsix]

I tried searching with no luck so I apologize in advance if this question has been covered before. Can someone please let me know if these wheels fit my B6 A4:



18x9 w/45mm offset and 5x112 bolt pattern.

Thanks!

[dirtybrd]

Yes, but you'll want some spacers on them. Remember the lower # of offset the farther the wheel will poke out. Look at an real RS4 wheel, it has an offset of 29. If you put them on an A4 the come out just past the fenders.

[tmgsix]

Thanks for your help. The wheels are actually et52 - not 45. Being that they're 9" wheels, any suggestion as to what the best spacer to use would be?

[dirtybrd]

I'd fit them first. It can vary from car to car due to tire size, ride height and alignment set-ups.

[vdubstreets]

they are probally 5x100 in that case you will need adapters not spacers.

[dirtybrd]

He said 5x112.

[vdubstreets]

unless they changed the lug pattern on the b7 tt's(or whatever mark it is), tt's are 5x100.

[Turb_Oh_A4]

Mk II TT's are 5x112