bolt patter 5x112 to 5x120

[BenGieCruz]

ermm, i want BREYTON's RACE GT rims and they only come on bolt pattern 5x120, is there any way that the bolt pattern on our cars can be converted? if so, is it expensive?

here are the rims.....TIA, bengie

[Pure Euro]

You'd need adapters... what are the widths and offsets?

5x120 is Porsche fittment IIRC

[BenGieCruz]

19x8.5 or 19x9.5 for rear......
Offset: 35mm
Bolt Pattern: 5x120
Rec. Tire Size:235/35-19

let me know.....where can i get these adapters?

[Pure Euro]

Sorry, not gonna work... you'll be rollin Mexipoke status

[BenGieCruz]

Sorry, not gonna work... you'll be rollin Mexipoke status

LMAO, jeje ok the adapters are out of the question, but how bout convertin the whole thing? would i still be rolling on mexipoke status?

[Pure Euro]

You'd be poking for sure... and will have spent A LOT of money that will require you to always run 5x120 wheels.

[BenGieCruz]

quick q.
so what is the MAX offset on wheels you can fit on our a4's without going out the fender?

[Pure Euro]

I'm running 18x10 et35 (I think) and I poke a little... but it looks goooood

[BenGieCruz]

dont you think there will be a difference since your running x10 and not x8.5???

and i do know it looks gut, but meing i love these breytons.......

[bunnn]

i'm wondering, can't you redrill these? I rmb on a b5(utopia's car) he redrilled a set of bmw rims to work on our audi's..if you really want to i'm pretty sure you can find some1 to do that for you

[FlashA4]

so are we trying to say that the adapters will not work only because of the width and offsets of the wheels? just curious...so lets say if the wheels were thinner, like 8.0, it would be fine? do the adapters act as spacers? he couldnt just roll the fenders to make them fit?

[BenGieCruz]

i just think that if you use the spacer (since they're like an inch thick) they would look pretty much like these.....lol

[Allwheel Driver]

You would need an offset of 45-50mm so you could fit in 15mm adapters. (if you can get them that size) Then the wheel/tire size would still have to be right to avoid rubbing.

That's why Porsche wheels work with adapters, their offsets are very high, like 55mm.

[Capt. Obvious]

Those BMW wheels will not look right if you use adapters. They'll poke too much, and I don't mean the cool kind of poke. You can redrill the hubs to 5x120, but it will be expensive and your car will be undrivable while your hubs and brake disks are at the machine shop getting drilled and tapped.

There are several companies that make wheels very similar those in 5x112. I'd focus my energy on finding those rather than trying to find a way to make 5x120 wheels fit on my car.

[i3oricua]

You may get some poking of the wheels but when I did it it looked really good but I rubbed way too much so I got smaller spacers. Here'sa link to what you would be looking for, I looked a long time ago because I was going to do it on another car I had. You can call some wheel experts and find out for sure, but I agree with most people that you will probably get some rubbing, especially on a wheel that big poking out. My $0.02.

[VMRWheels]

Even if you decide to go with adapters you will still have fitment issues due to the offset and width of the rim. Rims are a bit wide and the offset will be quiet low with the adapters.

-Charles@VMRWheels

[bunnn]

you know I just realized those rims look like champion rims that has fitment for our cars...Click probably more expensive, but then again I don't know how expensive it is..

[CaRJoE0220]

Where did you find these and how much are they? I have a Porsche and looking for wheels, those are pretty cool

[BenGieCruz]

i first saw them on a tirerack AD on ET, and i'd fall in love with those, i tried to look for them somewhere else but couldn't find no other retailer......

i guess i'll give up and buy some wheels with the right fitment......

thanks for the replies guys...