"new" body kit for C5 A6 for US market...

[Kievskiy]

why we recieve such a retarded body kits?
---
i was looking to get the side skirts from them, so i emailed them to see i they will sell them separate, also the front lip looks like it is add-on the stock bumper, i dunno about rear, looks like crap, whatcha guys think?
http://cgi.ebay.com/ebaymotors/ws/eB...7525&rd=1&rd=1

[eclimax13]

the front isnt too bad...but the back...what is wrong with ppl....and for that price....i still say the new generation conversion with our factory backs is the best combo

[Mboche]

I wouldn't ruin the beauty of an Audi with any of those parts........ I'd rather keep it stock......

[Gigi]

thumbs down

[Kievskiy]

what do you guys think about side skirts?
---
the responce that i got:
"Hello,

Your cost is $450 for the front and $450 for the sides. Shipping is $149.99. The front add on goes over your stock bumper. The lip/sides are about 1" lower than stock.
"
so 600 for the shipped unpainted sides......

[VJ's A6]

Hey Andrey--

The whole kit stupid and Ugly.. I won't get them.. What the hell are those guys thinking?? AUDI's are not Rice Rocket..

My $0.02 I would save the money and get the RS6 body kits..

[Alpinevelo]

They must be joking. On top of it all they are bad marketters because they could at least have shown the finished product. I know they wanted to highlight the kit parts but I think that we are all smart enough to figure out what's stock and what's not on our cars... X2 the front is not that bad the rear is a little over the top, plus the Bling wheels make it all look cheap... IMHO

[Kievskiy]

sup VJ,
$600 for the sides is too much imo, way too much, i'd rather get a tranny stabilizer and some other performance sh1t...and keep my stock look;)
lol
oh and to be honest i would rather get Erebuni kit for a6 and modifiy it a bit to make it look good....hahaha, of caurse nothing can beat RS conversion....

[VJ's A6]

sup VJ,
$600 for the sides is too much imo, way too much, i'd rather get a tranny stabilizer and some other performance sh1t...and keep my stock look;)
lol
oh and to be honest i would rather get Erebuni kit for a6 and modifiy it a bit to make it look good....hahaha, of caurse nothing can beat RS conversion....

I am more into go than show.. IMO I would spend the most of the money towards performance if its not a show car..

Yes.. I agree NOTHING BEATS the RS looks...

[MultiAudis]

can anybody photochop the front bumper to be silver like the car? I honestly doesn't think the front looks bad at all, and the sides are decent too. The back is a no go...

Kiev, did you get prices on anything else individually (ie front?)

[Kievskiy]

Yeah, look up, i posted the prices earlier;)

[MultiAudis]

I am a retard, thanks!

[joemamma]

the front is ok but the rest is garbage.

[Irish311]

Speaking of RS6 body kits / conversions, is LLtek the only shop selling RS6 aerodynamics for the non-4.2 C5's? Does anyone know of anyone else?

[eclimax13]

Speaking of RS6 body kits / conversions, is LLtek the only shop selling RS6 aerodynamics for the non-4.2 C5's? Does anyone know of anyone else?

tmtuning.com has a ton of stuff...estrictlyforeign.com has some other kits...

[oc-drop]

i'd rock that front end with black rs-like mesh

[Gigi]

strictlyforiegn has the exact same kit and they are nicer

[enigma1406]

Features:
- Save Hundreds $$ off MSRP
- Brand New / Never Installed / Never Painted
- Made of Handlaid Grade A Carbon Fiber with FRP Skeleton
- Gel Coat Finish for easier Prepping
- Not Drilled For Custom Fitment
- 4-5 oz. of Fiberglass

oh really?

[MultiAudis]

I saw that too and was wondering if that is actually the case...

[Alpinevelo]

Features:
- Save Hundreds $$ off MSRP
- Brand New / Never Installed / Never Painted
- Made of Handlaid Grade A Carbon Fiber with FRP Skeleton
- Gel Coat Finish for easier Prepping
- Not Drilled For Custom Fitment
- 4-5 oz. of Fiberglass

oh really?

I have never installed any mods like these, but what does that mean? Is that good, bad?

Eclimax13 Thanks Dude! Very cool stuff...

[Kievskiy]

Thanx man, i totaLy lost this link!!!!!

tmtuning.com has a ton of stuff...

[Amish]

Here's the deal for all you A6 guys... I have almo9st finished a full custom, one off lip and am thinking of making a mold and producing them outta carbon. I will post up pics later this week and would love to hear your guys' feedback on it and see who would be interested. I will say that this in my opinion is the best lip ever made for an A6 and everyone who has seen it has agreed. I ran into a snag this weekend with things as some ass clown slammed their door into my front fender and didn't leave a note so now I need to fix that before mounting the lip. I'll post pics soon those guys- Mike

[Kievskiy]

lets see that finished product!

[Alpinevelo]

tmtuning.com has a ton of stuff...estrictlyforeign.com has some other kits...

I could spend some serious dough at these sites. Lots of goodies to drool over...!

[Kievskiy]

^ and almost twice cheaper then lltek.....maybe you dont need to drool anymore, lol, time to get some new toys, hahaha

[SoFresh]

^ and almost twice cheaper then lltek.....maybe you dont need to drool anymore, lol, time to get some new toys, hahaha

that is just a cheap fiberglass knockoff of the Kerscher Kit for the B6 A4...

[BadBoyRipper]

Here's the deal for all you A6 guys... I have almo9st finished a full custom, one off lip and am thinking of making a mold and producing them outta carbon. I will post up pics later this week and would love to hear your guys' feedback on it and see who would be interested. I will say that this in my opinion is the best lip ever made for an A6 and everyone who has seen it has agreed. I ran into a snag this weekend with things as some ass clown slammed their door into my front fender and didn't leave a note so now I need to fix that before mounting the lip. I'll post pics soon those guys- Mike

Let's see it!!! If it looks as good as you say, I'll buy one.

[joemamma]

Here's the deal for all you A6 guys... I have almo9st finished a full custom, one off lip and am thinking of making a mold and producing them outta carbon. I will post up pics later this week and would love to hear your guys' feedback on it and see who would be interested. I will say that this in my opinion is the best lip ever made for an A6 and everyone who has seen it has agreed. I ran into a snag this weekend with things as some ass clown slammed their door into my front fender and didn't leave a note so now I need to fix that before mounting the lip. I'll post pics soon those guys- Mike

hey Amish...
http://pictureposter.audiworld.com/94878/dsc03576.jpg
http://pictureposter.audiworld.com/94878/dsc03574.jpg
http://pictureposter.audiworld.com/94878/dsc03594.jpg

is it anything like the 1 in this guy's pic poster

oh and I know the link won't work do to it being on the EVIL audiworld

[Kievskiy]

yeah pix dont work

[eclimax13]

id buy that...but would like to see it on a preface lift

[Amish]

Yeah, pics don't work, so I don't know.

Pics of the lip will be up soon but I need to finish a couple of custom bumpers for a friend before WW so I have to do that first.

[joemamma]

here you go

[Kievskiy]

holy sh1t!!!! but what about 2.7t folks? are we getting something like that too?

[Amish]

holy sh1t!!!! but what about 2.7t folks? are we getting something like that too?

Yep, Expect something very similar to that depending on the response will be available in both carbon fiber and fiberglass versions for the narrow body c5 A6.

[Kievskiy]

i want it, depends on the price difference of CF and fiberglass tho. but either one for sure! thanx for the update:)

[MultiAudis]

I'm in too for the pre-facelift version

[Amish]

I'm in too for the pre-facelift version

If I get these two bumpers done that I'm working on I will post pics up this weekend. If not the latest will be next week. I will make sure to start a thread on here and VwVortex.com to see how many people are interested and I'll go from there.

[Alpinevelo]

holy sh1t!!!! but what about 2.7t folks? are we getting something like that too?

X2 This is what I've always wanted. I think that the body style of the C5 A6 is the best, but truth be told the front of the car looks weak. I'd even put it on with just the clear coat. It would also look awesome on an S6 if I ever get one...


Where do I sign up for this??? Group buy, group buy, group buy.........

Edit Holly Sh1t times two I can't stop drooling over this thing How about an A6 spoiler in CF also "A la RS4"? That would complete the package. You can call it the Bad Ass A6 pack...

[BadBoyRipper]

Amish, are those actual pics of your product?

If it looks anything like that I'm sure that you'll have many buyers.

[Amish]

Amish, are those actual pics of your product?

If it looks anything like that I'm sure that you'll have many buyers.

Nope a bit different but cleaner I think. Very similar though. I'm running into trouble getting time for this right now but I promise to get it done soon. After that we'll make the mold for it and start producing others.