Have anyone heard of Stern wheels?? picture inside(if it works)

**hksbmoming** · 02-08-2007 06:07 PM

As the title said, anyone heard of it and any comment on it??
I did a search but couldn't find anything on it so does it mean it's not a good brand?or I didn't do a good job on searching about it.

This is a picture of Stern ST-1 Face III Beast(hope the picture works)

guys plz comment
this wheels cost 319 CAD per wheel
is it worth it??

Thank You

**HeymyAudi** · 02-08-2007 06:15 PM

Thay are all over ebay... thats the only place I have seen them i have also seen them on couple cars shown on the forums here

**hksbmoming** · 02-08-2007 06:20 PM

Yea that's exactly what i got by searching it, ebay and pictures about them
but I don't see much comment on them.

**bwoy1981** · 02-08-2007 07:38 PM

I saw it on a car (1.8T B6) at the dealership with 19 x8.5 in the front and 19x9.5 in the rear. It looked really good. Im about to sell my rims to do the same setup soon.

**quattrotman** · 02-08-2007 07:55 PM

Don't buy them dude. My friend bought them from Volco in October '06 for his 350z. By December '06 the lips were all pitted from the salt. He took em back and they gave him some foose wheels instead and they're fine but the even said they were a little surprised at the finish. Very cheaply made. Looks like just a thin chrome plated lip.

**RÖTSCHNEL** · 02-08-2007 08:06 PM

they dont look too hot. no IMO

**gohan** · 02-08-2007 08:21 PM

fugly

**hksbmoming** · 02-08-2007 08:32 PM

Originally Posted by quattrotman

Don't buy them dude. My friend bought them from Volco in October '06 for his 350z. By December '06 the lips were all pitted from the salt. He took em back and they gave him some foose wheels instead and they're fine but the even said they were a little surprised at the finish. Very cheaply made. Looks like just a thin chrome plated lip.

sad for ur frd man. anyone have the same problem??

I am actally thinking to get them from volco too but if that's a comment problem then i guess i need to search ard again.
btw anyone from vancouver that can recommend some wheel dealers??

**churcH** · 02-08-2007 08:52 PM

those are pretty sick, is there a side shot? do the spokes bend out or are they flat

**hksbmoming** · 02-08-2007 09:08 PM

gloss black

hyper silver (somehow looks like gunmetal)

**quattrotman** · 02-08-2007 09:18 PM

Originally Posted by hksbmoming

sad for ur frd man. anyone have the same problem??

I am actally thinking to get them from volco too but if that's a comment problem then i guess i need to search ard again.
btw anyone from vancouver that can recommend some wheel dealers??

Volco isn't bad but it's usually cheaper to order from the states (tire rack, etc) or take a cruise down to Seattle and pick something up there. Portland's even better....no sales tax

**hksbmoming** · 02-08-2007 09:18 PM

which one do u guys think is better
this one
or the
RS6 wheels??

**quattrotman** · 02-08-2007 09:21 PM

Originally Posted by hksbmoming

which one do u guys think is better
this one
or the
RS6 wheels??

RS6 hands down!

**Kid.Cuisine^** · 02-08-2007 09:31 PM

I got them on my car right now..... here are some pics. Gloss black! I think there sick. but! that's me.....

**CONTROL TWO** · 02-08-2007 10:50 PM

^^ where did u pick urs up at? im also in norcal and kinda interested in the st-2's

**BRTN151** · 02-08-2007 11:07 PM

these are low to mid range quality wheels. u pay for what u get . i think they look good for me. i like having spokes and alot of lip. here's a couple pics of my set up. i got them this time last year and didn't pay 2 much for them wit tires.$1,050.they 18"s 8.5 front and 9.5 rear.coarse i dont baby my wheels and thats why i didnt drop a load 4 a 3 piece wheel specialy i do a lot of freeway drivin and in la area roads are not forgiving on them. enjoy..

**aLeXliu911** · 02-08-2007 11:09 PM

i bought my rims cheap in richmond. and i am getting either maya STM or MRR or HP evo.

**Kid.Cuisine^** · 02-09-2007 12:28 AM

I got mine sadly at Les Schwab....

I was desperate at the time for some new shoes (Wheels)

Originally Posted by Ti.S.Line.21

^^ where did u pick urs up at? im also in norcal and kinda interested in the st-2's

**Tgr_Clw** · 02-09-2007 06:50 AM

Forget about bbk clearance with those.

**adam's rotors** · 02-09-2007 08:08 AM

of all the sterns those are the worst face design...
i have a wholesale connection for them in santa clara...stern wheels are produced by golden apple in hayward right by me...
heres the site...

heres the two legit designs...

and yes they are cheap, but doesnt mean there bad wheels either...any wheel will bend depending on how you drive it...some more then others

**GrkA4** · 02-09-2007 08:38 AM

Not a fan of those at all...

**xbatmit3x** · 02-09-2007 11:21 AM

they look cheap imo...

**ArcticBoost** · 02-09-2007 11:42 AM

the bottom line that remembertofocus posted looks pretty sick imo...

**adam's rotors** · 02-09-2007 11:51 AM

im sorry, but in now way do these look cheap

yes they are inexpensive and fake 3-piece...but they look quality as in finish and style...

im not even an owner or huge fan of stern, but they are a good low budget rim

**konigwheels** · 02-09-2007 02:27 PM

im a stern hater, but its mostly becuase of the people that rock them around here thinking they are some awesome wheel. i roll on ADRs but i dont talk them up like they're bbs.

**Kid.Cuisine^** · 02-09-2007 02:45 PM

Stern wheels has enough space to clear bbk. 328mm

As for the 332mm kit....

Dont know....

Originally Posted by Tgr_Clw

Forget about bbk clearance with those.

**hksbmoming** · 02-09-2007 06:23 PM

i see some ADRs and Stern wheels looks similar
are they from the same company or wat??
any relationship between the two?

**adam's rotors** · 02-09-2007 06:39 PM

same manufacturer

Thread: Have anyone heard of Stern wheels?? picture inside(if it works)

Thread Tools

Display

Have anyone heard of Stern wheels?? picture inside(if it works)

Re: Have anyone heard of Stern wheels?? picture inside(if it works)

Re: Have anyone heard of Stern wheels?? picture inside(if it works)

Re: Have anyone heard of Stern wheels?? picture inside(if it works)

Re: Have anyone heard of Stern wheels?? picture inside(if it works)

Re: Have anyone heard of Stern wheels?? picture inside(if it works)

Re: Have anyone heard of Stern wheels?? picture inside(if it works)

Re: Have anyone heard of Stern wheels?? picture inside(if it works)

Re: Have anyone heard of Stern wheels?? picture inside(if it works)

Re: Have anyone heard of Stern wheels?? picture inside(if it works)

Re: Have anyone heard of Stern wheels?? picture inside(if it works)

Re: Have anyone heard of Stern wheels?? picture inside(if it works)

Re: Have anyone heard of Stern wheels?? picture inside(if it works)

Re: Have anyone heard of Stern wheels?? picture inside(if it works)

Re: Have anyone heard of Stern wheels?? picture inside(if it works)

Re: Have anyone heard of Stern wheels?? picture inside(if it works)

Re: Have anyone heard of Stern wheels?? picture inside(if it works)

Re: Have anyone heard of Stern wheels?? picture inside(if it works)

Re: Have anyone heard of Stern wheels?? picture inside(if it works)

Re: Have anyone heard of Stern wheels?? picture inside(if it works)

Re: Have anyone heard of Stern wheels?? picture inside(if it works)

Re: Have anyone heard of Stern wheels?? picture inside(if it works)

Re: Have anyone heard of Stern wheels?? picture inside(if it works)

Re: Have anyone heard of Stern wheels?? picture inside(if it works)

Re: Have anyone heard of Stern wheels?? picture inside(if it works)

Re: Have anyone heard of Stern wheels?? picture inside(if it works)

Re: Have anyone heard of Stern wheels?? picture inside(if it works)

Re: Have anyone heard of Stern wheels?? picture inside(if it works)

Bookmarks

Bookmarks

Posting Permissions