Body kit for c5 a6.

[Kievskiy]

well, i'm getting bored with the stock look, i started searching and in US i came accross one body kit, erebuni, in germany (ebay) there are 2 or 3 but they dont ship to us, i still think that erebuni will look good painted and with some minor modification, since it was made for 2.8, i'm thinking to cut lil more near the foglights for better IC air flow, but i cant find any picture of it on the car painted exept that Blue A6 with unpainted kit, plus my car is waaay lower then that car, so it will look better already.
Give me your thoughts, i know somebody will think its rice, but i'm kinda getting sick seeing that anyone who's doing any bodywork its an RS6 replica, time to try something new, plus i'm sure can back it up with some 2.7t power:)
-Andrey.
ps: i've been thinking for a while about it so i know if i dont like it i will just sell it and put back the stock bumpers, i think it will look nice with some TLC:)

[stebesplace]

There is also a new kit from Hoeffel (spelling?) that converts our front ends to the C6...

http://forums.audiworld.com/a6/msgs/671384.phtml

[Kievskiy]

hmm, i saw one on German ebay but the hood was different.....and its extends too much upfront :(

[stebesplace]

Agreed, its pretty stretched, otherwise I would consider it! I actually think it makes the front end look good, but wayyyy too long. Other than the RS6 kits, there isn't much there for facelift models...

[oc-drop]

Oetti makes one too but I dont like it much... I'll see if I can find it

[oc-drop]

There is also a new kit from Hoeffel (spelling?) that converts our front ends to the C6...

http://forums.audiworld.com/a6/msgs/671384.phtml

hmmm i like it... but only after my photochopping...

i painted the flat part around the front plate to a glossy finish (a mod that will hopefully become popular with the C6/B7)

and added an RS lower grill...


I would love this look on my front end

[Gigi]

I like the one I just saw in th eLltek magazine, I think it was called the R6. VERY clean and looks good on lowered car.
I like the short front bumper, like in Europe.

[Kievskiy]

dont you think the r6 kit is way overpriced? i think it is, plus everybody doing them...:/

[Gigi]

Well I am willing to pay for a well designed and built kit for a perfect fit that looks like it came w/ the car from the factory... for my Audi. I would rather wait and save to get a good one. In my personal experiene, I have yet to see an A6 with a full body kit, so the "everybody is doing them" really is not an issue for me:) but I live in the carolinas!:) I really have not seen a great kit for the A6 that was proven, choices are limited.. the rest of your mods will single your car out... I trust you Andre, you've done great so far! You seem very creative!

No more pics in the sig allwed?

[stebesplace]

Ok, well here is a thought...

I actually want to get rid of my side door blades (3.0/2.7T style). I would like to put in the flat blades, which are found on the RS6 instead.

Has anyone seen this done? I have what I think are the part numbers, however I thought I could get them through LLTEK except it seems they are bundled with the larger side skirts.

Anyone have a solid source for these? LLTEK would be good because they can paint match, however its going to be tough since I think its bundled.

CarbonLord over at AW has a list of RS6 parts, however I can't quite tell which are which from his main list.

Thoughts? I would do these in reflex silver (2002 silver)

[Gigi]

NOt RS6 blades, but you probably mean S6 or 4.2... Clair sells them and you got to have your bodyshop paint them

[Kievskiy]

i have them:)
www.cardomain.com/id/dr_killer

Ok, well here is a thought...

I actually want to get rid of my side door blades (3.0/2.7T style). I would like to put in the flat blades, which are found on the RS6 instead.

Has anyone seen this done? I have what I think are the part numbers, however I thought I could get them through LLTEK except it seems they are bundled with the larger side skirts.

Anyone have a solid source for these? LLTEK would be good because they can paint match, however its going to be tough since I think its bundled.

CarbonLord over at AW has a list of RS6 parts, however I can't quite tell which are which from his main list.

Thoughts? I would do these in reflex silver (2002 silver)

[tonggi]

some guy from german squad got a very nice Bodykit. Forgot what its called. He has a 2.7t engine A6. He said he went through so much to get it then to get it fit. It was a euro spec type bumper. It was hot. wish I could remember it

[stebesplace]

NOt RS6 blades, but you probably mean S6 or 4.2... Clair sells them and you got to have your bodyshop paint them

No, I mean the RS6 "Flat" blades, that go above the side skirts...

Here is a pic of what I mean...

[tonggi]

I thought thats the sideskirts for the widebody? Wouldn't you need everthing for that to look clean? Like front and rear fenders?

[stebesplace]

I thought thats the sideskirts for the widebody? Wouldn't you need everthing for that to look clean? Like front and rear fenders?

Well that is certainly a good question. Anyone have an answer? I figured it would have just filled that area in with a flat bar, non raised...with the skirts fitting below?

[Gigi]

Oh I see those are the side skirts I was looking at. LLtek sells them as part of the R6 package. I think they look better than upgrading top bigger blades too but they are way mroe $! Dilemna!:)

[stebesplace]

Agreed, though I am just looking to get the flat blades, which I guess are included with the side skirts...which I am not interested in, because without the front bumper, the side skirts will look odd I think.

Anyone care to photoshop just the side skirts from the R6 package with a narrow body A6?

[Kievskiy]

for now i think stock with s6 blades looks very clean.:)

[oc-drop]

I would love this look on my front end

here is what i was quoted from Hofele in EU...

HF 7551 Single-Frame front bumper for Audi A6 4B C5 $ 904

HF 7052-RS4 front grill “RS4” incl. license plate holder $ 250

HF 7456 RS4 mesh for the fog lights $ 51

HF 7552 stronger bonnet gas holder $ 69

HF 7555 caps for the headlight washers $ 25

-----------------------------------------------------------------------------------------------------------------

total price (without transport costs) $ 1.299

transport to LAX $316

[cyco555]

this one looks nice


http://www.estrictlyforeign.com/asp/...gory=1&ID=1926