💥 RS3 8Y Sedan Manufacturer Confirmed Wheel Fitments 💥

[Paul@SupremePower]

Hello, i have a set of rse10 on my stock suspension 2018 rs3. I found a set of new 245/45r18 ps4s online for half of what they cost from a store. Unfortunately, i can't seem to find any evidence of a 245/45 being able to fit these cars. Is the diameter going to be too large? As i see, lots of people are running the 245/40r18. However, that's an entire inch smaller in diameter thant the 245/45.

Thanks for any input

Sent from my SM-S908U using Audizine Forum mobile app (http://r.tapatalk.com/byo?rid=87676)


Yeah you will have problems with speedo reading low and also as you said it is 1nch taller than stock. So most likely will rub even at stock height.

-cW


Sent from my iPhone using Tapatalk

What cool said. It’s the incorrect spec for a number of reasons.

[FSTSNAL]

8Y fitment added:



https://hosting.photobucket.com/images/jj283/supremepowerparts/D0DC3EEE-8957-41C4-A68E-4B3091CA406A.png?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/D0DC3EEE-8957-41C4-A68E-4B3091CA406A.png?width=1920&height=1080&fit=bounds)
RI-A
18x9 +38
Forged
18.5 lbs each
Steel brakes only
Front and rear (front will sit significantly inboard - rear is slightly aggressive)

How aggressive of rear fitment is this. What would be needed for 265/35r18? Some camber? These are a dream wheel. Assume around 20mm front spacer?

[Paul@SupremePower]

How aggressive of rear fitment is this. What would be needed for 265/35r18? Some camber? These are a dream wheel. Assume around 20mm front spacer?

Yep 255/35 and a little negative camber will clear rear. 15-20mm up front is solid. Shoot me an email I can get you set up 👊

[gomi]

Are 18's an option for CCB? It looks like a tight fit as is on the stock 19's.

[Paul@SupremePower]

Are 18's an option for CCB? It looks like a tight fit as is on the stock 19's.

No go on 18” for CCB.

[714RS3]

Are 18's an option for CCB? It looks like a tight fit as is on the stock 19's.

I have 18’s on my CCB’s no problem


Sent from my iPhone using Audizine Forum

[Paul@SupremePower]

I have 18’s on my CCB’s no problem


Sent from my iPhone using Audizine Forum

You have 18” over an 8Y CCB? Show me please!

[714RS3]

You have 18” over an 8Y CCB? Show me please!

You know what, I slipped into the 8Y thread instead of the 8V thread by mistake. My apologies Paul!


Sent from my iPhone using Audizine Forum

[Paul@SupremePower]

You know what, I slipped into the 8Y thread instead of the 8V thread by mistake. My apologies Paul!


Sent from my iPhone using Audizine Forum

Haha All good. You got me all excited for a sec tho.

[TheContrarian]

Anybody know if Superspeed RF05RR 18x9.0, ET42, 57.1 will fit the 8V? The specs look perfect but I don't know about caliper clearance. Emailed the company and a vendor that sells them, nobody replies.

https://www.superspeedwheels.com/flowform-rf05rr

[stummiller]

💥TE37 SAGA SL 18x9.5 +22 front 9.5 +45 rear for RS3 8Y steel brakes💥

Oh man this is a good one!

Perfect front and rear offsets with square widths and even concavity: FACE 4 !

This is the only TE37 I’ve found with this much concavity that clears the brakes and is also not too aggressive for the car needing camber or suspension mods. Bolt on and go!

Clears RS3 8Y steel brakes. Unfortunately they are 114.3 but no big deal as we can drill em for ya.

Fitment is confirmed and hoping to know stock status next week.

18x9.5 +22 front FACE 4

18x9.5 +45 rear FACE 4

Pressed Graphite finish

https://hosting.photobucket.com/images/jj283/supremepowerparts/B7D28387-AE1B-4834-9ECF-05ACC698CD40.webp?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/B7D28387-AE1B-4834-9ECF-05ACC698CD40.webp?width=1920&height=1080&fit=bounds)

https://hosting.photobucket.com/images/jj283/supremepowerparts/09CFF3A3-0EB9-4607-A072-B848D95890D3.webp?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/09CFF3A3-0EB9-4607-A072-B848D95890D3.webp?width=1920&height=1080&fit=bounds)

https://hosting.photobucket.com/images/jj283/supremepowerparts/F3BA8578-F2DE-4E18-A632-374310DD3937.webp?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/F3BA8578-F2DE-4E18-A632-374310DD3937.webp?width=1920&height=1080&fit=bounds)

https://hosting.photobucket.com/images/jj283/supremepowerparts/2E61778F-AAEF-47FF-85B5-630D30CC54B7.webp?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/2E61778F-AAEF-47FF-85B5-630D30CC54B7.webp?width=1920&height=1080&fit=bounds)

https://hosting.photobucket.com/images/jj283/supremepowerparts/5CA3CC31-CB26-4E53-932E-9883150604AD.jpeg?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/5CA3CC31-CB26-4E53-932E-9883150604AD.jpeg?width=1920&height=1080&fit=bounds)

Can anyone confirm this setup works for 100% stock suspension without rubbing?

[Paul@SupremePower]

Can anyone confirm this setup works for 100% stock suspension without rubbing?

It’s really difficult to get rub at stock height on any spec.. You really have to do way improper rim and/or tire sizing for that to happen. That said, this spec will not rub stock height or lowered up to an inch with 265/35. Even lower on 255s.

I’d love to see this setup done so Lmk if interested!

[FSTSNAL]

Those te37s are sick. What is the process to redrill and how is the strength after? Is that the only color in this spec?

[Paul@SupremePower]

Those te37s are sick. What is the process to redrill and how is the strength after? Is that the only color in this spec?

It’s a slight shave 1-2mm of the bolt bores to bring the PCD to 112 from 114.3. Strength is not effected. You’d never even know it was done if not looking for it. See below of a different rays I drilled. Before and after.

I believe they come a few colors.


https://hosting.photobucket.com/images/jj283/supremepowerparts/7B7535D7-509B-44D7-8744-9C92160615AA.jpeg


https://hosting.photobucket.com/images/jj283/supremepowerparts/29055C54-03D7-4A13-AAF4-481A6A67C4A1.jpeg

[FSTSNAL]

There is a shop in the sf bay, system motorsports, who said they can get BBs Japan wheels made to custom specs if there are enough orders. Wondering if there is interest in BBs ri-a in 18x9.5 et22 front et45 rear 5x112 and if possible custom 57.1 pcd? I can check to see how many they would need to be able to get this done and if it has to be done for a single color or if option for any color. If single color I say we vote and go with highest vote and anyone who wants different color could get them refinished. I would be open to 19” as well to allow ceramic brake cars to get in in this.

[ethan224117]

FS3 F1R perfect fitment with no spacers
Just need conical style bolts and hub centric rings.

Clears CCB and brings tires out even with fenders

19X8.5 ET 35 66.56mm CB311791311792311793

Thanks

[Paul@SupremePower]

💥New 18” Isweep wheel for RS3 8Y💥


https://hosting.photobucket.com/images/jj283/supremepowerparts/1691079984030.jpeg?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/1691079984030.jpeg?width=1920&height=1080&fit=bounds)



Incoming!

This will be the one and only off the shelf 18” wheel for the 8Y that checks all boxes:

—CLEARS 8Y CERAMIC BRAKES

-is 57.1 bore

-needs no spacers

-perfect spec for 245 drag radials on 8Y

-good spec for winter set ups

-near exact OEM widths and offsets can be configured if desired


Available in:

-Glossy Racing Graphite

-Flat Racing Graphite (almost black)

18x8 +45 (8Y rear - Also clears 8V rear)

18x8.5 +45 (8Y rear - Also clears 8V)

18x9.0 +45 (8Y rear - Also clears 8V)

18x9.0 +25 (8Y front)


👊[email protected]👊

[Def_Jukie]

Has anyone tried to fit a Desmond Regamaster EVO II 18X8.5 5X112 +45 over the front brakes?

Weights: 17.5 lbs or 7.937 kg per wheel
Lip Size: 48.1mm
Pad Area is 29mm Deep

Designed to fit Golf R/S3 and I'd assume at minimum a 20mm spacer up front.

[CW98]

How close here though ?
https://uploads.tapatalk-cdn.com/20221003/efe738988efd2e82babe5f6edf55fc99.jpg

I noticed this last week, I could just about get a finger in where the brake line is near the inner barrel and this is stock 19” wheel


Sent from my iPhone using Tapatalk

Wanted to revisit this with some of you guys running 18's and dealing with brake line clearance - I recently test fitted my previous 8V winter wheel (18x8.5 RSe10's) over the front brakes, and while they do clear the caliper no problem, I was quite alarmed at how close this line comes to the inner barrel. This pic is from the stock 19's btw, so you can imagine an inch smaller. I have the wheel weights on all my wheels on the back barrel, and they are practically touching the brake line. Moving the weights to the front would not be ideal either as that would significantly shrink the caliper clearance. Now granted I have not added a spacer yet to see final fitment, which I would run a 20mm up front for proper offset - but I'm quite concerned in a winter environment with packed snow/ice/rocks, that it could damage the brake line with this design on an 18" wheel. Thoughts or real-world usage of 18's on the 8Y with wheel weight placement or winter experience here? Thanks.

[Paul@SupremePower]

8Y Fitment added:


ISweep

Flat Racing Graphite:

https://hosting.photobucket.com/images/jj283/supremepowerparts/IMG_4880.jpeg?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/IMG_4880.jpeg?width=1920&height=1080&fit=bounds)


Gloss Racing Graphite w/ machined ring:

https://hosting.photobucket.com/images/jj283/supremepowerparts/IMG_4891.webp?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/IMG_4891.webp?width=1920&height=1080&fit=bounds)

18x8 +45 (8Y rear)
18x8.5 +45 (8Y rear)
18x9.0 +45 (8Y rear)
18x9.0 +25 (8Y front) CLEARS CCB

[993140]

8Y Fitment added:

ISweep

Flat Racing Graphite:

Gloss Racing Graphite w/ machined ring:

18x8 +45 (8Y rear)
18x8.5 +45 (8Y rear)
18x9.0 +45 (8Y rear)
18x9.0 +25 (8Y front) CLEARS CCB Very nice! Can we see the weights? Also, any plans for brighter colors like silver?

[Paul@SupremePower]

No other colors yet.

18x8.5 +45 8.99kg / 19.7 lbs
18x9.0 +45 9.57kg / 21 lbs
18x9.0 +25 10.01kg / 22 lbs

[Paul@SupremePower]

ISweep CP12

The only off the shelf wheel that clears 8Y CCB in 18” :


https://hosting.photobucket.com/images/jj283/supremepowerparts/IMG_4893.jpeg?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/IMG_4893.jpeg?width=1920&height=1080&fit=bounds)

[Alex D]

@Paul.. do you have any weights for the iSweep wheels in the 8Y fitment.

[Paul@SupremePower]

@Paul.. do you have any weights for the iSweep wheels in the 8Y fitment.

18x8.5 +45 8.99kg / 19.7 lbs
18x9.0 +45 9.57kg / 21 lbs
18x9.0 +25 10.01kg / 22 lbs

[VTHokie]

Might be a stupid question, but has anyone had any issues with fitting 4 wheels with or without tires in the trunk/cabin of the 8Y? I'm planning on picking up a second set of wheels for winter tires and just planning ahead

[xeonoex]

I have the stock set of wheels as well as a set of 4 18"x9"s. All four OEM wheels+tires fit standing in the back seat (folded down). The extra 2 inches from the square 9s means that one will not fit and needs to go in the trunk.

[VTHokie]

Thanks for the reply!

[993140]

OEM wheel specs:

19x9 +25 265/30-19 front

19x8 +46 245/35-19 rear

Maybe I missed it but has anyone weighed the OEM 19" wheels from the 8Y RS3?

[200Audi]

Anyone running 265 square? Which profile / rim (19 or 20)?

Planning on running them with stock suspension for the time being, maybe at a later stage I’ll swap my suspension.

Was thinking of HRE FF10, I welcome similar designs.

https://uploads.tapatalk-cdn.com/20231021/bac6dfce2b2c3a7933baecc684fc8f48.jpg


Sent from my iPhone using Tapatalk

[xeonoex]

Maybe I missed it but has anyone weighed the OEM 19" wheels from the 8Y RS3?

I weighed mine a while back. I don't remember the exact number but I think it was like 22-24 lbs. Pretty light for non-forged. Front is going to be a little heavier of course.


Anyone running 265 square? Which profile / rim (19 or 20)?

Planning on running them with stock suspension for the time being, maybe at a later stage I’ll swap my suspension.

Was thinking of HRE FF10, I welcome similar designs.

https://uploads.tapatalk-cdn.com/20231021/bac6dfce2b2c3a7933baecc684fc8f48.jpg


Sent from my iPhone using Tapatalk

I did 265s on 18"x9" square for my track setup. Though I'm trying out 245s on the same wheels now to get some stretch so the tires (hopefully) last longer. 18s definitely ride better, though might not look as good to some. I wouldn't go 20s though.

[Yes2m3cs]

I wish HRE did custom offsets on their flow form line. Don’t think most will work on the 8Y.

[993140]

I weighed mine a while back. I don't remember the exact number but I think it was like 22-24 lbs. Pretty light for non-forged. Front is going to be a little heavier of course.Those numbers make sense. Thank you!

[stummiller]

It’s a slight shave 1-2mm of the bolt bores to bring the PCD to 112 from 114.3. Strength is not effected. You’d never even know it was done if not looking for it. See below of a different rays I drilled. Before and after.

https://hosting.photobucket.com/images/jj283/supremepowerparts/29055C54-03D7-4A13-AAF4-481A6A67C4A1.jpeg

I'm a noob on the re-drill process. Does the re-drill from 114.3 to 112 only shave the inner part of the bore hole, essentially making it oval, to make it fit the 112 bore center or do the bolt seats also get re-machined to match the new 112 bore center?

[Paul@SupremePower]

I'm a noob on the re-drill process. Does the re-drill from 114.3 to 112 only shave the inner part of the bore hole, essentially making it oval, to make it fit the 112 bore center or do the bolt seats also get re-machined to match the new 112 bore center?

The bore and seat are completely drilled new and through.

[stummiller]

I am looking at the APEX SM-10RS wheels in 18x9.5 +41 for a square setup for track days. I have stock suspension (ride height and camber). I am told by APEX they may rub even with a 255/35R18 tire. Anyone have experience with same similar spec setup on stock suspension?

[Paul@SupremePower]

I am looking at the APEX SM-10RS wheels in 18x9.5 +41 for a square setup for track days. I have stock suspension (ride height and camber). I am told by APEX they may rub even with a 255/35R18 tire. Anyone have experience with same similar spec setup on stock suspension?

9.5 +41 is too much for the rear. You’ll need to add a good deal of negative camber to not rub. At the same time it’s not really enough for the front.

I have Wedsport tc105x 9.5 +25 front and 9.5 +45 rear in stock if you like. 17lbs each too.

It’s a solid track set up with 255 or 265 square. Can even stagger…275 and 255 shown below

https://hosting.photobucket.com/images/jj283/supremepowerparts/Image-2.jpeg?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/Image-2.jpeg?width=1920&height=1080&fit=bounds)

https://hosting.photobucket.com/images/jj283/supremepowerparts/7F944506-C5BF-4542-B04F-E5F57282A636.jpeg?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/7F944506-C5BF-4542-B04F-E5F57282A636.jpeg?width=1920&height=1080&fit=bounds)

[rev_hi]

I have Wedsport tc105x 9.5 +25 front and 9.5 +45 rear in stock if you like. 17lbs each too.

It’s a solid track set up with 255 or 265 square. Can even stagger…275 and 255 shown below



Paul do the tx105x fit over the carbon ceramic brakes? Any rubbing on that setup if lowered? Thanks!

[Paul@SupremePower]

They do not clear 8Y CCB. There’s only one off the shelf 18” that does with no spacer needed. Isweep CG12

I have those in stock as well.

[stummiller]

9.5 +41 is too much for the rear. You’ll need to add a good deal of negative camber to not rub. At the same time it’s not really enough for the front.

I have Wedsport tc105x 9.5 +25 front and 9.5 +45 rear in stock if you like. 17lbs each too.

It’s a solid track set up with 255 or 265 square. Can even stagger…275 and 255 shown below

https://hosting.photobucket.com/images/jj283/supremepowerparts/Image-2.jpeg?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/Image-2.jpeg?width=1920&height=1080&fit=bounds)

https://hosting.photobucket.com/images/jj283/supremepowerparts/7F944506-C5BF-4542-B04F-E5F57282A636.jpeg?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/7F944506-C5BF-4542-B04F-E5F57282A636.jpeg?width=1920&height=1080&fit=bounds)

Thanks Paul. Appreciate the guidance here. That looks like a nice setup. Edit: Curious about the rear rim fitment. The 18x9.5 +45 on the rear would be an additional poke of about 20 mm and additional inset of about 18 mm compared to stock. Any rub under cornering or load? I'm trying to get to an 18" square offset setup on stock suspension for track so I have more options on tires and can rotate tires. I know this means spacers for the front. Do you know if the 18x9.5 +45 (with ~20 mm spacer on the front) work? Would 18x9.0 be better choice for rim width given the tight rear wheel clearances (suspension and fender)?

[Paul@SupremePower]

Thanks Paul. Appreciate the guidance here. That looks like a nice setup. I'm trying to get to an 18" square offset setup on stock suspension for track so I have better options for tire choice and can rotate tires. I know this means spacers for the front. Do you know if the 18x9.5 +45 (with ~20 mm spacer on the front) work? Would 18x9.0 be better choice for rim width given the tight rear wheel clearances (suspension and fender)?

Glad to help.

Yep 18x9.5 +45 works square with a 20mm up front. Nets the same stance. I’d stay 9.5 here. With 265 lowered it clears within Oem camber ranges.

[stummiller]

319477

Hey all. I wanted to better analyze my options for a square offset 18" setup without adding significant negative camber or removing fender liners etc. so I created a google sheet to better understand the differences between the wheel width and offset options. I think it's pretty self explanatory but LMK if you think I've made a mistake somewhere. I used WillTheyFit.com to get the wheel poke and inset figures then formulas to calculate the poke and inset differences from stock. Pic above. Seems like for those who aren't ready to do suspension mods, the 18x9.0 ET45 looks to be the sweet spot. Interested if others can confirm 18x9.5 ET45 like the one Paul suggested has worked for them? Hope others find this useful as well.

Also added a link below to the shared Google sheet.
https://docs.google.com/spreadsheets/d/1WWjt8WakrZljZ9kgeKwc_ynh8ziL1y6EHh5AmDpMt-U/edit?usp=sharing

[integroid]

Did anyone notice that TSW has the Imatra listed now in a 18X9 et 45 and 18X9.5 et 22 in 5X112? I believe this is the setup Hank from Iroz is running on his 8Y. https://www.tsw.com/tsw-imatra

Doesnt look like anyone has them in stock yet but this could be another option for us 8Y people.

319927

[Paul@SupremePower]

Did anyone notice that TSW has the Imatra listed now in a 18X9 et 45 and 18X9.5 et 22 in 5X112? I believe this is the setup Hank from Iroz is running on his 8Y. https://www.tsw.com/tsw-imatra

Doesnt look like anyone has them in stock yet but this could be another option for us 8Y people.

319927

He’s running 18x10.5 with 285 RS4s up front on it.

[993140]

A new APEX 18" VS-5RS staggered setup was just released

https://apexwheels.com/fitment-guides/audi/rs-3/audi-8y-rs-3-wheel-and-tire-fitment-guide#performance-street-and-track

[Disturbedfan121]

Thoughts on these te37’s? They’re 5x114 but wobble bolts could fix that.
https://www.rayswheels.co.jp/products/wheel.php?wheel=TE37Ultra_TR2&lang=en

https://i.ibb.co/gJH5x2d/IMG-0125.jpg (https://ibb.co/YhYzxCX)
jack sparrow gif (https://imgbb.com/)

[Paul@SupremePower]

Thoughts on these te37’s? They’re 5x114 but wobble bolts could fix that.
https://www.rayswheels.co.jp/products/wheel.php?wheel=TE37Ultra_TR2&lang=en

https://i.ibb.co/gJH5x2d/IMG-0125.jpg (https://ibb.co/YhYzxCX)
jack sparrow gif (https://imgbb.com/)

Only options are Doing the 9.5 +22 front with 8.5 +45 rear. Which is way more concavity up front than rear. Face 3 and face 1. Front will be flush but not the rear. It’s possible I guess but bleh.

I’ll be posting examples of a TE37 set up i put together soon that’s 9.5 square, flush front and rear plus deep Face 4 on all corners.

[Disturbedfan121]

Only options are Doing the 9.5 +22 front with 8.5 +45 rear. Which is way more concavity up front than rear. Face 3 and face 1. Front will be flush but not the rear. It’s possible I guess but bleh.

I’ll be posting examples of a TE37 set up i put together soon that’s 9.5 square, flush front and rear plus deep Face 4 on all corners.

Oh that’s great< are they 19’s?

[integroid]

Thoughts on these te37’s? They’re 5x114 but wobble bolts could fix that.
https://www.rayswheels.co.jp/products/wheel.php?wheel=TE37Ultra_TR2&lang=en

https://i.ibb.co/gJH5x2d/IMG-0125.jpg (https://ibb.co/YhYzxCX)
jack sparrow gif (https://imgbb.com/)

There is a guy on the RS3 North American FB group that is selling a set like this. They are even drilled to 5X112 by Rays but he waited awhile for them. You can see the difference in the face between the front and rears. That would probably be a no for me.

[Gene Hanscomb]

First off, thanks to Paul for all he does on this forum.

Secondly, I had a 2018 8V with HRE FF01 wheels in a squared set up that I used in the winter. Now I have a 2023 8Y and I wanted the FF01 to fit so I contacted HRE. They easily volunteered that 4mm spacers would be fine up front and more guardedly volunteered that 5mm spacers would work in back so I tried it and, lo and behold, everything fits.

Anyway, FF01 19x9.5 ET45 will work with hubcentric 5mm spacers in the rear and 4mm spacers up front. Square set-up obviously. It is tight but I'm happy with it.

[Paul@SupremePower]

Oh that’s great< are they 19’s?


https://hosting.photobucket.com/images/jj283/supremepowerparts/IMG_5963.jpeg?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/IMG_5963.jpeg?width=1920&height=1080&fit=bounds)

-18x9.5 square
-No spacers
-Flush front and rear
-OEM camber front and rear
-Face 4 front and rear

[stummiller]

https://hosting.photobucket.com/images/jj283/supremepowerparts/IMG_5963.jpeg?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/IMG_5963.jpeg?width=1920&height=1080&fit=bounds)

-18x9.5 square
-No spacers
-Flush front and rear
-OEM camber front and rear
-Face 4 front and rear

What size tires?


Sent from my iPhone using Tapatalk

[Paul@SupremePower]

What size tires?


Sent from my iPhone using Tapatalk

Pictured with 265/35-18

[Paul@SupremePower]

First off, thanks to Paul for all he does on this forum.

Secondly, I had a 2018 8V with HRE FF01 wheels in a squared set up that I used in the winter. Now I have a 2023 8Y and I wanted the FF01 to fit so I contacted HRE. They easily volunteered that 4mm spacers would be fine up front and more guardedly volunteered that 5mm spacers would work in back so I tried it and, lo and behold, everything fits.

Anyway, FF01 19x9.5 ET45 will work with hubcentric 5mm spacers in the rear and 4mm spacers up front. Square set-up obviously. It is tight but I'm happy with it.

👊👊👊

[sdkfz184]

Hello, everyone. I'll be picking up my 8Y in two weeks. Considering the upcoming winter in the tri-state area, I'm planning to switch to winter tires soon. I previously had a mk7 R and own a set of BBS RF516 18 x 8 ET45 wheels. After playing with WillTheyFit.com, it appears the rear will fit fine, but the front might need around a 20mm spacer. Has anyone here tried fitting these wheels? Your insights would be greatly appreciated!

[stummiller]

Hello, everyone. I'll be picking up my 8Y in two weeks. Considering the upcoming winter in the tri-state area, I'm planning to switch to winter tires soon. I previously had a mk7 R and own a set of BBS RF516 18 x 8 ET45 wheels. After playing with WillTheyFit.com, it appears the rear will fit fine, but the front might need around a 20mm spacer. Has anyone here tried fitting these wheels? Your insights would be greatly appreciated!

Inner wheel barrel diameter will be the most critical but T ET45 20mm spacer would get you to same offset as the stock ET 25 front wheels


Sent from my iPhone using Tapatalk

[Paul@SupremePower]

Hello, everyone. I'll be picking up my 8Y in two weeks. Considering the upcoming winter in the tri-state area, I'm planning to switch to winter tires soon. I previously had a mk7 R and own a set of BBS RF516 18 x 8 ET45 wheels. After playing with WillTheyFit.com, it appears the rear will fit fine, but the front might need around a 20mm spacer. Has anyone here tried fitting these wheels? Your insights would be greatly appreciated!

Assuming you have steel brakes, that the barrel will clear the brakes and a 20mm spacer is enough to clear the spokes this configuration will sit 13mm more inbound than the Oem 9 +25. Rear won’t be an issue.

Definitely post what you find. Interested in the outcome.

[Disturbedfan121]

Looks like OZ updated their site with correct fitment wheels for the 8y, leggera hlt, ultraleggera hlt are on the list, correct oem sizes and offsets.
https://configurator.ozracing.com/GB/configurator/AUDI/RS3%20Sportback/2.5%20TFSI%20Quattro/GY/-/-/1350308031048455280/
These sizes aren’t listed on tire rack, but they do give part numbers, so might be able to call an OZ reseller and have them order them?

[993140]

Looks like OZ updated their site with correct fitment wheels for the 8y, leggera hlt, ultraleggera hlt are on the list, correct oem sizes and offsets.
https://configurator.ozracing.com/GB/configurator/AUDI/RS3%20Sportback/2.5%20TFSI%20Quattro/GY/-/-/1350308031048455280/
These sizes aren’t listed on tire rack, but they do give part numbers, so might be able to call an OZ reseller and have them order them?Thanks for posting. The Zeus is quite nice and light. Twenty one pounds for the 9".

[Rs3ct888]

hi there,
i have an '24 RS3 and would like to switch to an 18" square setup..
i am planning to get a BBS RI-A / 18x9 et38 with 265/35/18 or a 275/35/18 around on michellin AS / with 15 mm spacer at front and rear as is?

stock suspension for now but may go the H&r springs in the future.

will this setup works? any input would help (i love the IROZ red RS3 look. for reference)

thanks all in advance!

[Paul@SupremePower]

hi there,
i have an '24 RS3 and would like to switch to an 18" square setup..
i am planning to get a BBS RI-A / 18x9 et38 with 265/35/18 or a 275/35/18 around on michellin AS / with 15 mm spacer at front and rear as is?

stock suspension for now but may go the H&r springs in the future.

will this setup works? any input would help (i love the IROZ red RS3 look. for reference)

thanks all in advance!

What brakes? Shoot me an email to discuss

[Rs3ct888]

steel brakes

[Rs3ct888]

im on steel brakes

[Paul@SupremePower]

im on steel brakes

20mm spacer needed to clear brakes. Rear works no spacer. 265/35-18 max

Email if interested

[Rod Paine]

Hi Rs3ct888,
I am running 245/40/18 on 18x8.5 alloy wheels, now at 48,574 miles
of which 34,832 miles have been fast country back road runs at
10am to 2pm as weather permits in our 2019 Audi RS 3. No issues
to date and very pleased with this configuration. The factory 19-inch
was not a very good configuration at all, given the number of years I've
been making fast country back road runs since 1958.
FWIW.
-Rod

[Rs3ct888]

hi paul, so 15mm wont work? im afraid 20mm would stick out too much

[Rs3ct888]

also, how soon can you get the BBS RI-a (18x9 et38) in matte graphite?

[Paul@SupremePower]

hi paul, so 15mm wont work? im afraid 20mm would stick out too much

20mm is minimum to clear brakes per bbs.

It wouldn’t stick out at all. With a 20mm you’d net 9 +18 which sits identically to 9.5 +25 which is pictured below on the fronts. I think 15mm would be too inboard if it worked anyway.

https://hosting.photobucket.com/images/jj283/supremepowerparts/Image-2.jpeg?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/Image-2.jpeg?width=1920&height=1080&fit=bounds)


also, how soon can you get the BBS RI-a (18x9 et38) in matte graphite?

Shoot me an email

[Rs3ct888]

ok..thanks again Paul
wait if i go a different route, just saw the Iroz TSW setup..
so i can go the
18x9.5 et22
18x9 et45
with 265/35's
without spacers?

[Paul@SupremePower]

hi paul, so 15mm wont work? im afraid 20mm would stick out too much


ok..thanks again Paul
wait if i go a different route, just saw the Iroz TSW setup..
so i can go the
18x9.5 et22
18x9 et45
with 265/35's
without spacers?

I do not believe that is what Hank is running up front in those. Our convos on it was they were 10.5”. All the pics I have show same. Unless he changed it but I don’t see him dropping from a 285 tire to a 265.

That said, if the 9.5 +22 clear the brakes it’s a solid set up.

[Rs3ct888]

iroz car wheels look like the kemora ?

[Paul@SupremePower]

iroz car wheels look like the kemora ?

Yes

[Rs3ct888]

perfect, ok got it.
i may sound crazy but my oem 19's matte may be for sale (with two sets of almost new tires / bridgestone oem's and conti all seasons both stock sizes)
to be replaced with the BBS RI-A - 18's
TBD :-)

[t2flair]

perfect, ok got it.
i may sound crazy but my oem 19's matte may be for sale (with two sets of almost new tires / bridgestone oem's and conti all seasons both stock sizes)
to be replaced with the BBS RI-A - 18's
TBD :-)


Let me know if your OEM 19's are for sale, I'd be interested.

[t2flair]

@Paul, what would you recommend for the Vossen HF-7? I was thinking squared setup, maybe 19x8.5, to go with my 245/35/19 all season tires.

[Paul@SupremePower]

@Paul, what would you recommend for the Vossen HF-7? I was thinking squared setup, maybe 19x8.5, to go with my 245/35/19 all season tires.

With the right offsets that can work. Bit narrow tho. Maybe do 9”. It works with 245/35 and allows you wider tires later.

Shoot me an email if you wanna discuss 👊

[Quattro75]

I saw a post from last year on Facebook where Iroz commented the wheel specs.
(Audi RS3 8Y – Global owners/fans)
It said TSW 18x10.5 with a custom ET37 front and 18x9 ET45 rear.
I believe it’s been said before that these wheels are TSW Kemora…with some custom touch apparently.

But I’m more interested in TSW Imatra, 18x9.5 ET22 front and 18x9 ET45 rear since I’m sticking with a staggered setup (275 front, 255 rear).
Is there any way to confirm how these would fit since Kemora seems to clear the calipers at least?
TSW are describing the wheels very similar on their website at least.

[Yes2m3cs]

https://hosting.photobucket.com/images/jj283/supremepowerparts/IMG_5963.jpeg?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/IMG_5963.jpeg?width=1920&height=1080&fit=bounds)

-18x9.5 square
-No spacers
-Flush front and rear
-OEM camber front and rear
-Face 4 front and rear

Hi Paul any full pics of the car with this setup? Thank you!

[Paul@SupremePower]

Hi Paul any full pics of the car with this setup? Thank you!

https://hosting.photobucket.com/images/jj283/supremepowerparts/IMG_5963_vm8nofFiq3NwR6XUowLDLS.jpeg?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/IMG_5963_vm8nofFiq3NwR6XUowLDLS.jpeg?width=1920&height=1080&fit=bounds)

[integroid]

I saw a post from last year on Facebook where Iroz commented the wheel specs.
(Audi RS3 8Y – Global owners/fans)
It said TSW 18x10.5 with a custom ET37 front and 18x9 ET45 rear.
I believe it’s been said before that these wheels are TSW Kemora…with some custom touch apparently.

But I’m more interested in TSW Imatra, 18x9.5 ET22 front and 18x9 ET45 rear since I’m sticking with a staggered setup (275 front, 255 rear).
Is there any way to confirm how these would fit since Kemora seems to clear the calipers at least?
TSW are describing the wheels very similar on their website at least.

I believe Hank has et35 wheels.

I have a set of the Kemora's on order. 18X9.5 et 22 and 18X9 et 45. For some reason they are not listed on their actual website but they make them in that size. Hopefully I will have them in the next few weeks. I plan on putting 275/35 on the front and 255/35 on the rear,

[Rguy]

https://hosting.photobucket.com/images/jj283/supremepowerparts/IMG_5963_vm8nofFiq3NwR6XUowLDLS.jpeg?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/IMG_5963_vm8nofFiq3NwR6XUowLDLS.jpeg?width=1920&height=1080&fit=bounds)


THIS is the way.

IS this using wobble bolts?

[vsneaky]

Been looking for something like BBS FS with a bit better value - forged with similar OEM look, no spacers (19/staggered)

Considering these but not sure if they fit well (steel brakes)

Volk ZE40 M-Spec
Apex SM-10RS
Titan 7 T-R10

Anyone got suggestions or should I just pay up for the BBS in diamond black...

[integroid]

Been looking for something like BBS FS with a bit better value - forged with similar OEM look, no spacers (19/staggered)

Considering these but not sure if they fit well (steel brakes)

Volk ZE40 M-Spec
Apex SM-10RS
Titan 7 T-R10

Anyone got suggestions or should I just pay up for the BBS in diamond black...

I know the Apex wheels have a big difference in face profiles between the front and rear. I considered them too but decided against it once I saw the differences. I believe same with the ZE40.

[Paul@SupremePower]

Been looking for something like BBS FS with a bit better value - forged with similar OEM look, no spacers (19/staggered)

Considering these but not sure if they fit well (steel brakes)

Volk ZE40 M-Spec
Apex SM-10RS
Titan 7 T-R10

Anyone got suggestions or should I just pay up for the BBS in diamond black...


BBS FS

-can do 19x9.5 +45 with 20mm spacer up front none in rear. This has even concavity
-can do 19x9 +25 no spacer with 8.5 +42 or 8 +30 no spacers rear. Fronts are deeper than rear


Volk ZE40 M-Spec

-18x9.5 +21 is good spec up front but I’d need to check if it clears brakes and would need redrill to 5x112 if it does. Rears would need to be 8.5 +43. Fronts are deeper than rears.

Apex SM-10RS

18x9.5 +41 works up front but it’s a weak spec. You’d want 15-20mm spacer for looks. On the rear this spec is slightly aggressive so you’d need to dial ride height or add a touch of negative camber to not rub

Titan 7 T-R10

18x8.5 +44 is only possibility. You’d want 20mm spacer up front for looks.


If you like the straight multi spoke style check out the tc105x in this thread. It’s similar and works in a good spec front and rear with no spacers and even concavity. I also have them in stock.

[Paul@SupremePower]

THIS is the way.

IS this using wobble bolts?

Indeed!

These are properly redrilled. I won’t sell wobble bolts.

BTW I have an unspoken for set of these due in June.

[RS3sistable]

https://hosting.photobucket.com/images/jj283/supremepowerparts/IMG_5963_vm8nofFiq3NwR6XUowLDLS.jpeg?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/IMG_5963_vm8nofFiq3NwR6XUowLDLS.jpeg?width=1920&height=1080&fit=bounds)

naughty girl

[sdkfz184]

Hello, everyone. I'll be picking up my 8Y in two weeks. Considering the upcoming winter in the tri-state area, I'm planning to switch to winter tires soon. I previously had a mk7 R and own a set of BBS RF516 18 x 8 ET45 wheels. After playing with WillTheyFit.com, it appears the rear will fit fine, but the front might need around a 20mm spacer. Has anyone here tried fitting these wheels? Your insights would be greatly appreciated!




Assuming you have steel brakes, that the barrel will clear the brakes and a 20mm spacer is enough to clear the spokes this configuration will sit 13mm more inbound than the Oem 9 +25. Rear won’t be an issue.

Definitely post what you find. Interested in the outcome.

Finally, I had the wheels refurbished and mounted, here are the results:

BBS RF Forged RF516 18 x 8 ET45 + 245/40/18 PS4 AS + 20 mm spacer in the front, no camber, everything stock

they are not flushed (neither were the OEs), but it's growing on me, plus the ride quality is soooo much better

https://i.imgur.com/Tlui1eF.jpeg
https://i.imgur.com/CphdhuM.jpeg
https://i.imgur.com/fE8pocG.jpeg
https://i.imgur.com/5FSGRuI.jpeg
https://i.imgur.com/dyRocXk.jpeg

[Paul@SupremePower]

naughty girl

🤣🤣🤣

[Paul@SupremePower]

Finally, I had the wheels refurbished and mounted, here are the results:

BBS RF Forged RF516 18 x 8 ET45 + 245/40/18 PS4 AS + 20 mm spacer in the front, no camber, everything stock

they are not flushed (neither were the OEs), but it's growing on me, plus the ride quality is soooo much better

https://i.imgur.com/Tlui1eF.jpeg
https://i.imgur.com/CphdhuM.jpeg
https://i.imgur.com/fE8pocG.jpeg
https://i.imgur.com/5FSGRuI.jpeg
https://i.imgur.com/dyRocXk.jpeg

Looks great!

Solid winter set up. Lots of sidewall, sits inboard to keep salt in the wells and hell you can argue with anything BBS forged.

[sdkfz184]

Looks great!

Solid winter set up. Lots of sidewall, sits inboard to keep salt in the wells and hell you can argue with anything BBS forged.

i now wonder if i can swap the front with RF527 18 x 8.5 ET38 + 20mm or 15mm spacer for a more flush look

or do those RF527 fit the rear without any change?

[Paul@SupremePower]

i now wonder if i can swap the front with RF527 18 x 8.5 ET38 + 20mm or 15mm spacer for a more flush look

or do those RF527 fit the rear without any change?


Running the RF527 a 20mm will put you 13mm more aggressive than your current set up. It actually puts it equivalent to the fender as the Oem 9 +25.

The 527 on the rear works no problem it sits the same as it does on the 8V:

https://www.instagram.com/p/B-U23zzptNK/?igsh=MW95Mm5memRlODEzYg==

[FSTSNAL]

Question on wide tire fitment on front. I know iroz is running 285 I believe. Anyone try a 295 or 305 yet?

[RS3sistable]

Paul,
Do you know if any Advan Wheels fit the 8Y without a redrill. Really like your Weds setup.

Any chance you have a shot of the BBS RE-V7 wheels mounted on an 8y?

thanks

[Paul@SupremePower]

Paul,
Do you know if any Advan Wheels fit the 8Y without a redrill. Really like your Weds setup.

Any chance you have a shot of the BBS RE-V7 wheels mounted on an 8y?

thanks

Not yet on Advan. I’m still trying tho.

Haven’t done the RE-V7 nor have I seen it.

I have the weds in stock lmk 😈

[integroid]

Question on wide tire fitment on front. I know iroz is running 285 I believe. Anyone try a 295 or 305 yet?

I was at IROZ earlier this week and they said 295 seems to fit on their car with 18X10.5 et 35 wheels.....but it didnt have an ecu in it so they couldnt drive it to make sure.

[integroid]

I saw a post from last year on Facebook where Iroz commented the wheel specs.
(Audi RS3 8Y – Global owners/fans)
It said TSW 18x10.5 with a custom ET37 front and 18x9 ET45 rear.
I believe it’s been said before that these wheels are TSW Kemora…with some custom touch apparently.

But I’m more interested in TSW Imatra, 18x9.5 ET22 front and 18x9 ET45 rear since I’m sticking with a staggered setup (275 front, 255 rear).
Is there any way to confirm how these would fit since Kemora seems to clear the calipers at least?
TSW are describing the wheels very similar on their website at least.


These are the part numbers for the TSW Kemora wheels that IROZ is using.
TSW Kemora 18x9 +45 Blue
1890KMA455112U66A
TSW Kemora 18x10.5 +35 Blue
1805KMA355112U66A



TSW Kemora 18x9 +45 Gunmetal
1890KMA455112G66A
TSW Kemora 18x10.5 +35 Gunmetal
1805KMA355112G66A

As far as the Imatra wheel, the barrels and wheels are very similar so I am guessing they will fit but havent tested to be sure.

[Quattro75]

Thanks for the info about the TSW Kemora!

How about the set you ordered for your car, 18X9.5 et 22 and 18X9 et 45.
Do you have the part number for the 18x9,5 et 22 as well?

Let us know how they fit once you've received them.

[integroid]

Thanks for the info about the TSW Kemora!

How about the set you ordered for your car, 18X9.5 et 22 and 18X9 et 45.
Do you have the part number for the 18x9,5 et 22 as well?

Let us know how they fit once you've received them.

1895KMA225112U66A KEMORA GLOSS DARK BLUE 18X9.5 5X112
1895KMA225112G66A KEMORA MATTE GUNMETAL 18X9.5 5X112

Well, they didnt have the front wheels in stock so I have been waiting. I am now in the process of changing my order to the 18X10.5 front wheels.

[RS3sistable]

Thanks, I'll keep an eye on the thread.

[Quattro75]

I was at IROZ earlier this week and they said 295 seems to fit on their car with 18X10.5 et 35 wheels.....but it didnt have an ecu in it so they couldnt drive it to make sure.

By the way, did you notice if IROZ was running any camber plates to go with the KW HAS that seems to be fitted to the car?

[integroid]

By the way, did you notice if IROZ was running any camber plates to go with the KW HAS that seems to be fitted to the car?

There is no way to really see those from the top and I didnt bother to ask. Sorry.

[echuang10]

Thank you Paul for setting this up - super helpful and informative. Also great to see everybody's lovely cars!

I am currently looking at Neuspeed's RSe 102 between the 2 configs

19x9 +40 SQUARE (will sit significantly inboard from front fender)
19x9 +45 SQUARE (will sit significantly inboard from front fender)

I like the square set up as this will allow me to rotate tire if needed. I will run the 20mm spacer up front to sit flush. I am running stock height at the moment.

Is anyone running 19x9 +40? And what's your feedback on the rear? Is it sitting pretty flush or sticking out too much?

I know +45 will fit no problem. I do like the more aggressive concavity of +40, but afraid it will stick out too much on the back. Thoughts?

[Quattro75]

Considering that Iroz can squeeze in an 18x10.5 ET35 wheel, would it be fair to assume that an 18x10 ET30 would fit as well then?
(Then I’m only talking about available space towards suspension and fender).
I’m looking at an 18x10 ET40 wheel and was thinking about adding a 10mm spacer to this wheel.

According to willtheyfit.com
“Compared to your existing wheel, this new wheel will have an inner rim which is 11.4mm further away from the suspension strut. The outer rim will poke out 1.3mm less than before.”

Does changing from standard to a KW HAS suspension provide any more clearance towards the inside...if that can be part of the magic of fitting the 10.5 wheel.
Just curious and would be nice to know (so I base my decisions on correct facts)

[Cherub]

This is 19x9.5 +20 and 9.5 +45 with 265:


https://hosting.photobucket.com/images/jj283/supremepowerparts/DC7C0222-9537-4941-9468-169AB6E6EA3D.png?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/DC7C0222-9537-4941-9468-169AB6E6EA3D.png?width=1920&height=1080&fit=bounds)


https://hosting.photobucket.com/images/jj283/supremepowerparts/D4207BBD-FA54-40EB-95EA-1A62E062A783.png?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/D4207BBD-FA54-40EB-95EA-1A62E062A783.png?width=1920&height=1080&fit=bounds)

Personally, this would be the set up of choice. Clean flush and squared
Unsure if any spacers are included

[Paul@SupremePower]

No spacers and 57.1 bore. We can do it lmk!

[vsneaky]

Any thoughts on a setup like this:

Advan RSIII
Front: 19x9.5 +38 with 15mm spacer
Back: 19x8.5 +45

[Paul@SupremePower]

Any thoughts on a setup like this:

Advan RSIII
Front: 19x9.5 +38 with 15mm spacer
Back: 19x8.5 +45

If it’s enough to clear the brakes it’s a solid net spec

Shoot me an email if you wanna investigate

[993140]

Where can we find the specs on this set of Volk G025?

https://www.instagram.com/rayswheelsusa/p/C4nkmp7Lr3r/?img_index=4

[Paul@SupremePower]

Where can we find the specs on this set of Volk G025?

https://www.instagram.com/rayswheelsusa/p/C4nkmp7Lr3r/?img_index=4

Did a bunch of these on the 8V. Such an amazing wheel. 19x9.5 +44 is the spec.

On the 8Y looks to be a 25mm spacer up front. You could do 20mm and still look good. Rear is no spacer.

[993140]

On the 8Y looks to be a 25mm spacer up front. You could do 20mm and still look good. Rear is no spacer.Thanks, Paul. But it seems the fronts are more concave than the rear. Looks to me they are different sizes/offsets.

[Paul@SupremePower]

Thanks, Paul. But it seems the fronts are more concave than the rear. Looks to me they are different sizes/offsets.

Yep you’re right. Then it’s gotta be 19x9.5 +25 face 4 up front and probably 19x9.5 +44 face 3 rear. Could even be 19x8.5 +35 face 2 rear. Hard to tell with the pic angles.

In any case, I’d do 19x9.5 +45 face 3 square with a spacer here. Deeper up front doesn’t do it for me.

[LightningRhod]

Hey Paul, have you test fitted the BBS LM-R's? I'm interested in these for my car when it comes in (soon).

https://bbs-usa.com/road_wheels/wheel_details.cfm?wheel=36

The closest 8Y (staggered) fitment they seem to have are:

Front: 19 x 9.5 5-112 et38
Rear: 19 x 8.5 5-112 et38


Front should fit with 10-15mm spacer, right? Rear might be too aggressive?

[Paul@SupremePower]

Hey Paul, have you test fitted the BBS LM-R's? I'm interested in these for my car when it comes in (soon).

https://bbs-usa.com/road_wheels/wheel_details.cfm?wheel=36

The closest 8Y (staggered) fitment they seem to have are:

Front: 19 x 9.5 5-112 et38
Rear: 19 x 8.5 5-112 et38


Front should fit with 10-15mm spacer, right? Rear might be too aggressive?

Unfortunately not. Been looking into this for a year at least. All the LMR need enormous spacers up front. Like 25-30mm. And this is on ones with offsets that are already higher offsets. The combo make it poke too much.

I do have good options for LM though. Square or staggered. And with pretty good concave

[audiesss3]

Just ordered Apex VS-5RS 18 inch wheels going for a reverse stagger setup. Would love to see more of your 18 inch setups in this thread.

[LightningRhod]

Unfortunately not. Been looking into this for a year at least. All the LMR need enormous spacers up front. Like 25-30mm. And this is on ones with offsets that are already higher offsets. The combo make it poke too much.

I do have good options for LM though. Square or staggered. And with pretty good concave

Ah ok. Too bad, really like the look of the LMR's. Might have to go in a different direction then. Thanks for the insight though [up]

- - - Updated - - -


Just ordered Apex VS-5RS 18 inch wheels going for a reverse stagger setup. Would love to see more of your 18 inch setups in this thread.

Was thinking about doing this as my track setup. Please post pics when you get them! [:d]

[audiesss3]

Ah ok. Too bad, really like the look of the LMR's. Might have to go in a different direction then. Thanks for the insight though [up]

- - - Updated - - -



Was thinking about doing this as my track setup. Please post pics when you get them! [:d]

Will do. If you’re on Instagram let’s connect find me @thee_rs3. I’ll be posting tons of pics there and confirming fitment. Also testing out 034 Motorsport lowering springs since I’m getting 18s.

[MakisB8.5]

Paul, Are these Weds TC105X clears CCB??

[MakisB8.5]

Incoming!! This will be updated on an ongoing basis.


The RS3 8Y looks to be even more challenging for wheel fitment than the 8V.

The steel and CCB are larger but the real issue is the difference in fender room front compared to rear. The front has lots of room but the rear looks to have the same or possibly slightly less room than the 8V.

This means at this point, most of the off the shelf fits will be deeper concavity up front compared to the rear if you go staggered. Any square set up will be limited to whatever max spec is possible in the rear (provided it also clears the front brakes) so the fronts will not be flush.

Im still working on what the max size in the rear can be to help nail down square set ups. My hope and belief is 19x9.5 +45 with 265 will again fit back there. At least that way, the concavity will be even. That said, and best case scenario…..if 19x9.5 +45 works in the rear, the front will need a large spacer with that spec to be flush.

My guess is custom once again will be the best option for square set ups….at least right away. Going that route will allow flush front and rear, square widths and even or close to even concavity. I’m working on this as well.



*** This info shouldn’t change but anything is possible so please make sure you make a final confirmation on the specs with the manufacturer or shop if you place an order elsewhere.

*** Below listed specs have been confirmed to clear the listed brakes and are in an oem, flush or close to flush position unless otherwise noted. Strut clearance up front on 9.5 +45 with no spacer will be close depending on tire size and brand A small spacer may be needed to clear it in certain configurations.

*** Tire brand effects the functional size and can effect the final mounted fit, look and fender clearance

*** Ride height effects fender and liner clearance

*** Oem camber settings in the rear are a range. They can vary slightly from the factory and from car to car. These variations can effect rear fender clearance when lowered.


As always, feel free to email me with questions or for quotes 👊


OEM wheel specs:

19x9 +25 265/30-19 front

19x8 +46 245/35-19 rear



***BALANCE WEIGHTS: MOST BALANCE WEIGHTS ON 18” WILL NEED TO BE LOW PROFILE AND STRATEGICALLY PLACED TO CLEAR THE CALIPER BASED ON THE INDIVIDUAL BARREL DESIGN. ALWAYS TEST FIT TO CONFIRM CLEARANCE BEFORE DRIVING OFF***




BBS

https://hosting.photobucket.com/images/jj283/supremepowerparts/bbs_fs002_wheelPic_7-7-2020_4354.png?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/bbs_fs002_wheelPic_7-7-2020_4354.png?width=1920&height=1080&fit=bounds)
FS 002
19x9 +25
FRONT AXLE ONLY
Pic is actual wheel/concavity
Forged
Confirmed for steel brakes so far


https://hosting.photobucket.com/images/jj283/supremepowerparts/bbs_fs001_wheelPic_7-7-2020_4352(1).png?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/bbs_fs001_wheelPic_7-7-2020_4352(1).png?width=1920&height=1080&fit=bounds)
FS 001
19x8.5 +42
REAR AXLE ONLY
Pic is actual wheel/concavity
Forged
Confirmed for steel brakes so far


https://hosting.photobucket.com/images/jj283/supremepowerparts/bbs_cir2404_wheelPic_8-26-2020_4591(2).png?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/bbs_cir2404_wheelPic_8-26-2020_4591(2).png?width=1920&height=1080&fit=bounds)
CIR 2404
19x9.5 +25
FRONT AXLE ONLY
Pic is actual wheel/concavity
Confirmed for steel brakes so far


https://hosting.photobucket.com/images/jj283/supremepowerparts/bbs_cir2103_wheelPic_8-26-2020_4557(1).png?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/bbs_cir2103_wheelPic_8-26-2020_4557(1).png?width=1920&height=1080&fit=bounds)
CIR 2103
19x8.5 +45
REAR AXLE ONLY
Pic is actual wheel/concavity
Confirmed for steel brakes so far


https://hosting.photobucket.com/images/jj283/supremepowerparts/bbs_cir_0201wheelPic_8-26-2020_4591(1).png?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/bbs_cir_0201wheelPic_8-26-2020_4591(1).png?width=1920&height=1080&fit=bounds)
CIR 0201
20x9 +25
FRONT AXLE ONLY
Pic is actual wheel/concavity
Confirmed for steel brakes so far


https://hosting.photobucket.com/images/jj283/supremepowerparts/bbs_cir0103_wheelPic_8-26-2020_4557(1).png?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/bbs_cir0103_wheelPic_8-26-2020_4557(1).png?width=1920&height=1080&fit=bounds)
CIR 0103
20x8.5 +42
REAR AXLE ONLY
Pic is actual wheel/concavity
Confirmed for steel brakes so far


https://hosting.photobucket.com/images/jj283/supremepowerparts/bbs_ccr0301_wheelPic_8-26-2020_4661(1).png?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/bbs_ccr0301_wheelPic_8-26-2020_4661(1).png?width=1920&height=1080&fit=bounds)
CCR 0301
20x9 +25
FRONT AXLE ONLY (has same concavity as below rear axle spec)
Pic is actual wheel/concavity
Confirmed for steel brakes so far


https://hosting.photobucket.com/images/jj283/supremepowerparts/bbs_ccr0203_wheelPic_8-26-2020_4661(1).png?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/bbs_ccr0203_wheelPic_8-26-2020_4661(1).png?width=1920&height=1080&fit=bounds)
CCR 0203
20x8.5 +42
REAR AXLE ONLY
Pic is actual wheel/concavity
Confirmed for steel brakes so far




https://hosting.photobucket.com/images/jj283/supremepowerparts/02320A14-FB2F-47C7-B7BE-23F5BD751600.jpeg?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/02320A14-FB2F-47C7-B7BE-23F5BD751600.jpeg?width=1920&height=1080&fit=bounds)
RE-V7
19x9 +25 or 19x9.5 +25
FRONT AXLE ONLY
Forged
Pic is actual wheel/concavity
Confirmed for steel brakes so far



https://hosting.photobucket.com/images/jj283/supremepowerparts/33858325-B071-46C6-942E-16DCB71980B2.jpeg?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/33858325-B071-46C6-942E-16DCB71980B2.jpeg?width=1920&height=1080&fit=bounds)
RE-V7
19x8.5 +43
REAR AXLE ONLY
Forged
Pic is actual wheel/concavity
Confirmed for steel brakes so far



https://hosting.photobucket.com/images/jj283/supremepowerparts/83502A47-5067-4E92-81B2-DE985B76066E.jpeg?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/83502A47-5067-4E92-81B2-DE985B76066E.jpeg?width=1920&height=1080&fit=bounds)
Super RS
19x9 +28 plus 5mm spacer to clear front brakes FRONT AXLE ONLY
Forged
Confirmed for steel brakes so far



No picture
Super RS
Forged
19x8.5 +43 REAR AXLE ONLY

*Super RS are import only special order



https://hosting.photobucket.com/images/jj283/supremepowerparts/D0DC3EEE-8957-41C4-A68E-4B3091CA406A.png?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/D0DC3EEE-8957-41C4-A68E-4B3091CA406A.png?width=1920&height=1080&fit=bounds)
RI-A
18x9 +38
Forged
18.5 lbs each
Steel brakes only
SQUARE (rear slightly aggressive)
Pic is actual wheel/concavity









NEUSPEED


https://hosting.photobucket.com/images/jj283/supremepowerparts/97DF9253-E0C8-4957-9041-ACAE261B6504.webp?width=1920&height=1080&fit=bounds (https://app.photobucket.com/u/supremepowerparts/a/3bfd0c22-7b2d-459c-bb1e-01032122c82c/p/02dc8579-17e8-4d72-be39-9c5755e245b3)
RSe05

19x8.5 +45 SQUARE 5mm spacer recommended to clear front brakes (will sit significantly inboard from front fender)
19x9 +45 SQUARE (will sit significantly inboard from front fender)
19x9 +40 SQUARE (will sit significantly inboard from front fender)
19x9.5 +45 SQUARE (will sit significantly inboard from front fender)
Pic is actual wheel/concavity
Steel & CCB


https://hosting.photobucket.com/images/jj283/supremepowerparts/28ED29F1-0DA9-4F10-B0B6-0F7CA48AA281.jpeg?width=1920&height=1080&fit=bounds (https://app.photobucket.com/u/supremepowerparts/a/3bfd0c22-7b2d-459c-bb1e-01032122c82c/p/374087e9-76b9-42c1-9ffb-624f5839c2cf)
RSf72

Forged
19x9 +45 SQUARE (will sit significantly inboard from front fender)
19x9.5 +45 SQUARE (will sit significantly inboard from front fender)
Pic is actual wheel/concavity
Steel and CCB

https://hosting.photobucket.com/images/jj283/supremepowerparts/C4C5F3A4_A22D_46DA_938C_76F6877C41D7.jpeg?width=19 20&height=1080&fit=bounds (https://app.photobucket.com/u/supremepowerparts/a/3bfd0c22-7b2d-459c-bb1e-01032122c82c/p/27c80da5-63cd-430d-9a9f-afbb0d4a87cc)
RSe06
18X8.5 +45 SQUARE 5mm spacer recommended to clear front brakeS (will sit significantly inboard from front fender)
18X9 +40 SQUARE (will sit significantly inboard from front fender)
18x9 +45 SQUARE (will sit significantly inboard from front fender)
18X9.5 +45 SQUARE (will sit significantly inboard from front fender)
Pic is actual wheel/concavity
Steel brakes only



https://oi275.photobucket.com/albums/jj283/supremepowerparts/Allset/82533EEE-B30D-4CC2-8A35-D3123F406312_zpsesc12svg.jpeg (http://s275.photobucket.com/user/supremepowerparts/media/Allset/82533EEE-B30D-4CC2-8A35-D3123F406312_zpsesc12svg.jpeg.html)
RSe11R

18X8.5 +45 SQUARE 5mm spacer recommended to clear front brakes
18X9 +40 SQUARE (will sit significantly inboard from front fender)
18x9 +45 SQUARE (will sit significantly inboard from front fender)
18X9.5 +45 SQUARE (will sit significantly inboard from front fender)
Pic is actual wheel/concavity
Steel brakes only

http://i275.photobucket.com/albums/jj283/supremepowerparts/Allset/RSe142B_1024x1024_zpsetpnhj6s.jpg (http://s275.photobucket.com/user/supremepowerparts/media/Allset/RSe142B_1024x1024_zpsetpnhj6s.jpg.html)
RSe142
19X8.5 +45 SQUARE 5mm spacer recommended to clear front brakes (will sit significantly inboard from front fender)
19X9 +40 SQUARE (will sit significantly inboard from front fender)
19x9 +45 SQUARE (will sit significantly inboard from front fender)
19X9.5 +45 SQUARE (will sit significantly inboard from front fender)
Pic is actual wheel/concavity
Steel & CCB

http://i275.photobucket.com/albums/jj283/supremepowerparts/Allset/RSe122BR_1024x1024_zpskrvgebzz.jpg (http://s275.photobucket.com/user/supremepowerparts/media/Allset/RSe122BR_1024x1024_zpskrvgebzz.jpg.html)
RSe122
18X8.5 +45 SQUARE 5mm spacer recommended to clear front brakes (will sit significantly inboard from front fender)
18X9 +40 SQUARE (will sit significantly inboard from front fender)
18x9 +45 SQUARE (will sit significantly inboard from front fender)
18X9.5 +45 SQUARE (will sit significantly inboard from front fender)
Pic is actual wheel/concavity
Steel brakes only

http://i275.photobucket.com/albums/jj283/supremepowerparts/Allset/NEU%20RSE102_zps1pwqgjmy.jpg (http://s275.photobucket.com/user/supremepowerparts/media/Allset/NEU%20RSE102_zps1pwqgjmy.jpg.html)
RSe 102
19x9 +40 SQUARE (will sit significantly inboard from front fender)
19x9 +45 SQUARE (will sit significantly inboard from front fender)
19x8.5 +45 SQUARE 5mm spacer recommended to clear front brakes (will sit significantly inboard from front fender)
Pic is NOT actual wheel/concavity
Steel & CCB

http://i275.photobucket.com/albums/jj283/supremepowerparts/Allset/NEU%20RSE10_zpsvvoboks5.jpg (http://s275.photobucket.com/user/supremepowerparts/media/Allset/NEU%20RSE10_zpsvvoboks5.jpg.html)
RSe 10
19x9 +40 SQUARE (will sit significantly inboard from front fender)
19x9 +45 SQUARE (will sit significantly inboard from front fender)
19x8.5 +45 SQUARE 5mm spacer recommended to clear front brakes (will sit significantly inboard from front fender)
Pic is actual wheel/concavity
Steel and CCB

18x8.5 +45 SQUARE (will sit significantly inboard from front fender)
18x9 +40 SQUARE (will sit significantly inboard from front fender)
18x9 +45 SQUARE (will sit significantly inboard from front fender)
Pic is actual wheel/concavity
Steel brakes only

http://i275.photobucket.com/albums/jj283/supremepowerparts/Allset/NEU%20RSE52_zpssqylpeaw.jpg (http://s275.photobucket.com/user/supremepowerparts/media/Allset/NEU%20RSE52_zpssqylpeaw.jpg.html)
RSe 52
18x9 +45 SQUARE (will sit significantly inboard from front fender)
18x9 +40 SQUARE (will sit significantly inboard from front fender)
Pic is actual wheel/concavity
Steel brakes only


https://hosting.photobucket.com/images/jj283/supremepowerparts/0F2DC146-C1CF-4D6D-AB35-0E02330F471E.webp?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/0F2DC146-C1CF-4D6D-AB35-0E02330F471E.webp?width=1920&height=1080&fit=bounds)
TSe53
18x8.5 +35 SQUARE (will sit significantly inboard from front fender)
18x9 +25 FRONT ONLY TO BE USED STAGGERED WITH ABOVE 18X8.5 +35 ON THE REAR
Pic is actual wheel/concavity of the 9 +25
Steel brakes only



***BALANCE WEIGHTS: MOST BALANCE WEIGHTS ON 18” WILL NEED TO BE LOW PROFILE AND STRATEGICALLY PLACED TO CLEAR THE CALIPER BASED ON THE INDIVIDUAL BARREL DESIGN. ALWAYS TEST FIT TO CONFIRM CLEARANCE BEFORE DRIVING OFF***


[/SIZE][/B]



ISWEEP


https://hosting.photobucket.com/images/jj283/supremepowerparts/IMG_4893.jpeg?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/IMG_4893.jpeg?width=1920&height=1080&fit=bounds)

https://hosting.photobucket.com/images/jj283/supremepowerparts/IMG_4891.webp?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/IMG_4891.webp?width=1920&height=1080&fit=bounds)

18x8 +45 (8Y rear)
18x8.5 +45 (8Y rear)
18x9.0 +45 (8Y rear)
18x9.0 +25 (8Y front) CLEARS CCB



VOSSEN

https://hosting.photobucket.com/images/jj283/supremepowerparts/3CB65407-F9AE-4642-BC56-621ADF4315B2.jpeg?width=1920&height=1080&fit=bounds (https://app.photobucket.com/u/supremepowerparts/a/3bfd0c22-7b2d-459c-bb1e-01032122c82c/p/00214e0e-cf40-4910-83fd-df764bf8201e)
https://hosting.photobucket.com/images/jj283/supremepowerparts/222E7F95-0CAC-45FE-A13A-DFD96988E492.jpeg?width=1920&height=1080&fit=bounds (https://app.photobucket.com/u/supremepowerparts/a/3bfd0c22-7b2d-459c-bb1e-01032122c82c/p/dc5e2750-8958-4c18-bfdc-8406831d9cf2)
HF-5
19x9.5 +20 DEEP CONCAVE FRONT
19x8.5 +33 DEEP CONCAVE REAR
Pic is actual wheel/concavity



RAYS




https://hosting.photobucket.com/images/jj283/supremepowerparts/B7D28387-AE1B-4834-9ECF-05ACC698CD40.webp?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/B7D28387-AE1B-4834-9ECF-05ACC698CD40.webp?width=1920&height=1080&fit=bounds)
TE37 Saga SL
18x9.5 +22 5x114.3 drilled to 5x112 Face 4 FRONT
18x9.5 +45. 5x114.3 drilled to 5x112 Face 4 REAR
Pic is actual wheel/concavity front and rear



https://hosting.photobucket.com/images/jj283/supremepowerparts/26E663F9-2968-4D97-AA76-410731CE265B.webp?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/26E663F9-2968-4D97-AA76-410731CE265B.webp?width=1920&height=1080&fit=bounds)
TE37 Saga S Plus
18x9.5 +45 5x114.3 Face 3
Must be redrilled to 5x112
FRONT AND REAR OR REAR WITH ABOVE SPEC ON FRONT
(Front will sit significantly inboard from fender)
FRONT MAY NEED 3-5mm SPACER TO CLEAR STRUT DEPENDING ON TIRE SIZE
Pic is actual wheel/concavity



[SIZE=5]HARTMANN





https://hosting.photobucket.com/images/jj283/supremepowerparts/3FF6D5D5-D3DB-4778-A2FA-7FFA6A60193E.jpeg?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/3FF6D5D5-D3DB-4778-A2FA-7FFA6A60193E.jpeg?width=1920&height=1080&fit=bounds)
FF-070-CG
19X9 +25 front only
19x8.5 +47 rear only
Both specs have the same face profile


https://i275.photobucket.com/albums/jj283/supremepowerparts/Allset/C1A8406D-C9EA-4B30-BDCA-BA9CCAAE08FE_zpsbuubcx7b.jpeg (http://s275.photobucket.com/user/supremepowerparts/media/Allset/C1A8406D-C9EA-4B30-BDCA-BA9CCAAE08FE_zpsbuubcx7b.jpeg.html)
FF-003-CG
19x9 +25 front only
19x8.5 +47 rear only
Both specs have the same face profile



WEDSSPORT:


https://hosting.photobucket.com/images/jj283/supremepowerparts/66ED98AC-77B2-4CB5-B530-F69B547F9643.jpeg?width=1920&height=1080&fit=bounds (https://hosting.photobucket.com/images/jj283/supremepowerparts/66ED98AC-77B2-4CB5-B530-F69B547F9643.jpeg?width=1920&height=1080&fit=bounds)
TC105X
18x9.5 +45 5x112 square
17.8 lbs each
-Wheel clears brakes bolt on but FRONT MAY NEED 3-5mm SPACER TO CLEAR STRUT DEPENDING ON TIRE SIZE
-Will sit significantly inboard up front. Rear is flush.

Or

18x9.5 +25 front @ 18.1 lbs each
18x9.5 +45 rear listed above
-front sits slightly inboard. Rear is flush.
Pic is actual wheel/concavity for both specs



[/B]

Paul, Are these Weds TC105X clears CCB??

[Paul@SupremePower]

Paul, Are these Weds TC105X clears CCB??

Unfortunately not. The only off the shelf 18” that clears 8Y CCB in a reasonable spec is the Isweep CG12

[christoph17]

Confirming Neuspeed RS10 18x9 ET45 Fit with 265/35-R18 fit- no rub.
(Square setup, +20mm spacers up front per this thread)

Continental Sport Contact 02 Summer Tires.
Thank you for the userful info here



https://www.audizine.com/forum/showthread.php/990794-RS3-8Y-Confirmed-18-quot-wheel-and-tire-fitment-Neuspeed-Hyper-Black?p=15070346#post15070346

[coolwater]

Stance SF07 19x9.5 et16 front et45 rear
255/35 r19 DWS06 plus
Lowered on Neuspeed Sport Springs

https://uploads.tapatalk-cdn.com/20240511/6bf20b10de30c273f7f1be1da9186a5c.jpg

https://uploads.tapatalk-cdn.com/20240511/32228a45e65081d4691e088120becb7c.jpg

-cW


Sent from my iPhone using Tapatalk

[christoph17]

Niiice

[Bhorowitz]

Hi Paul,
Bob Horowitz from Montana here, newbie on the forum. I have a 2024 RS3 on the way and I was wondering if you have any info on what snow tires to put on the car using the OEM wheels. I'm sure this has already been addressed, but I didn't have any luck using the search feature.
Regards,
Bob

[Paul@SupremePower]

Hi Paul,
Bob Horowitz from Montana here, newbie on the forum. I have a 2024 RS3 on the way and I was wondering if you have any info on what snow tires to put on the car using the OEM wheels. I'm sure this has already been addressed, but I didn't have any luck using the search feature.
Regards,
Bob

Hi bob. The only possibility that is a usable width for both 9 and 8 and the right overall diameter is 245/35-19 square. Also an option is 245/35f with 235/35r. Also It’s next to impossible to find a snow in 30 height in 19” in the widths needed.

That’s said, my recommendation is always a dedicated 18” set up for snows. Something you can run square widths and offsets, narrow for cutting snow and tall enough for pothole protection

[Bhorowitz]

Hi bob. The only possibility that is a usable width for both 9 and 8 and the right overall diameter is 245/35-19 square. Also an option is 245/35f with 235/35r. Also It’s next to impossible to find a snow in 30 height in 19” in the widths needed.

That’s said, my recommendation is always a dedicated 18” set up for snows. Something you can run square widths and offsets, narrow for cutting snow and tall enough for pothole protection

Paul,
Thanks for your response. Can you recommend a reasonable 18"wheel and snow tire package? Also, do you sell said package?

[Paul@SupremePower]

Paul,
Thanks for your response. Can you recommend a reasonable 18"wheel and snow tire package? Also, do you sell said package?

Sure thing. Sell everything here and more. Shoot me an email. It’s much easier and faster.

[ApexEight]

Any 8Ys running 18x10 +40 275/35?

[Paul@SupremePower]

Any 8Ys running 18x10 +40 275/35?


This will not clear the strut. Need 10-12mm spacer

[brobst]

Do these LMRs fit the 8y?
19x8.5 +38 5x112
Or is it different than the 8v.

Sent from my SM-S901U using Tapatalk

[bokiboki]

so PSA, Neuspeed is releasing an 8Y RS3 wheel in August ... 18x9 ET25 and 18x9 ET45. More pics and info in late July. Just an FYI for folks that want to run a smaller wheel and meaty tires i.e. me :)

I would really like the Neuspeed RSe10's in that spec (except for maybe 18x8.5 ET45 for the rear) - are those available? I really don't want to run any spacers if possible so that would be perfect. Can't find them on Neuspeed website. I would like to run 265 front and 245 rear but on 18 inch wheels - what would be the tire specs to look the closest to the OEM 19 inch setup on stock suspension 8Y. Thanks.

[schwabo]

only 18" that clears the front calipers is the new iSweep wheel.. you and me both man .. I'd love an RSe10 setup.

[Paul@SupremePower]

I would really like the Neuspeed RSe10's in that spec (except for maybe 18x8.5 ET45 for the rear) - are those available? I really don't want to run any spacers if possible so that would be perfect. Can't find them on Neuspeed website. I would like to run 265 front and 245 rear but on 18 inch wheels - what would be the tire specs to look the closest to the OEM 19 inch setup on stock suspension 8Y. Thanks.

Unfortunately there’s no neuspeed in that spec.

We can do Isweep 18x9 +25 and 8 +45 for an almost identical stock spec. Can also do 8.5 +45

Lmk!

[200Audi]

https://uploads.tapatalk-cdn.com/20240611/50773c750aeb6b85883ab748c57a6b6a.jpg
New shoes for the summer!

Specs:
19x9.5 wheels

Front:
Offset +25
PS4S X2
275/30-19

Rear:
Offset +45
PS4S x2
255/30-19


Sent from my iPhone using Tapatalk

[200Audi]

Here is a side view
https://uploads.tapatalk-cdn.com/20240611/d7afa46d5de6d09e38a1eb9b30d4b4ac.jpg


Sent from my iPhone using Tapatalk

[theworldisyours]

Paul,

Is there a 19” OZ Superturismo LM fitment for the 8Y? I don’t see anything listed on tire rack or OZs website for this car, but I know they have a 19x9.5 / 19x8.5 5x112.

[Paul@SupremePower]

Paul,

Is there a 19” OZ Superturismo LM fitment for the 8Y? I don’t see anything listed on tire rack or OZs website for this car, but I know they have a 19x9.5 / 19x8.5 5x112.

Unfortunately OZ is terrible with communication. Really hard to get brake clearance info from them.

[993140]

Is there a 19” OZ Superturismo LM fitment for the 8Y? I don’t see anything listed on tire rack or OZs website for this car, but I know they have a 19x9.5 / 19x8.5 5x112.Here's what OZ is showing as available for the 8Y RS3 at least in Europe:

https://configurator.ozracing.com/GB/configurator/AUDI/RS3%20Sportback/2.5%20TFSI%20Quattro/GY/-/-/1350308031048455280/

[theworldisyours]

Unfortunately OZ is terrible with communication. Really hard to get brake clearance info from them.

Thanks. Figured it was worth an ask since they’re a pretty good price.

I guess 19” BBS CH-R’s are going to be the winner for me.

[Paul@SupremePower]

Thanks. Figured it was worth an ask since they’re a pretty good price.

I guess 19” BBS CH-R’s are going to be the winner for me.

Which specs? I don’t recall an 8Y option working.

[theworldisyours]

Which specs? I don’t recall an 8Y option working.

I had emailed you previously regarding 19x9.5 +35 front (with a 15mm spacer) and 19x8.5 +40 rear and you confirmed it would work. Or you said I could go 19x9.5 +45 square (with a front spacer) if I want the face to be the same front and rear.


I’ve seen photos of an 8Y on 19” CH-Rs so there is definitely a setup that clears.

[Paul@SupremePower]

I had emailed you previously regarding 19x9.5 +35 front (with a 15mm spacer) and 19x8.5 +40 rear and you confirmed it would work. Or you said I could go 19x9.5 +45 square (with a front spacer) if I want the face to be the same front and rear.


I’ve seen photos of an 8Y on 19” CH-Rs so there is definitely a setup that clears.

Ah yes with spacers. I thought you meant a bolt on spec.

Lmk if you wanna get em going.

[C0rbindallas]

Unfortunately not. Been looking into this for a year at least. All the LMR need enormous spacers up front. Like 25-30mm. And this is on ones with offsets that are already higher offsets. The combo make it poke too much.

I do have good options for LM though. Square or staggered. And with pretty good concave

Paul - more info the BBS LM setup you mentioned in this post - sizes, offset, and availability?

[Paul@SupremePower]

Paul - more info the BBS LM setup you mentioned in this post - sizes, offset, and availability?

Hey! Shoot me an email to discuss!

[Rguy]

If this car can get BBS LMs on it, tell us!

[S3DUDE]

use the "tread width" measurement on Tire Rack. it tells you the actual tire width when installed, a 245 will be stretched on a 9, try to find one that has the widest "tread width" to minimize the stretch look, unless you like that.
Fantastic tip and often overlooked and on this 8Y RS3 platform it means a lot because there is little to no margin for screwing up the fitment in the rear. I already heard from the horse mouth (two 8Y RS3 owners that have YouTube channels) that some tires can be wider, specifically the Nanking CR-S V2 and for instance the Trofeo Rs (cited by Vag performance YouTube channel).[up][up]

[HoppyIPA]

Anyone know if there's a clearance difference between a Euro spec sportback and the US spec sedan?

[Paul@SupremePower]

Anyone know if there's a clearance difference between a Euro spec sportback and the US spec sedan?

Brakes no. Fenders yes.

[KJPATEL35]

Hi bob. The only possibility that is a usable width for both 9 and 8 and the right overall diameter is 245/35-19 square. Also an option is 245/35f with 235/35r. Also It’s next to impossible to find a snow in 30 height in 19” in the widths needed.

That’s said, my recommendation is always a dedicated 18” set up for snows. Something you can run square widths and offsets, narrow for cutting snow and tall enough for pothole protection

Hi Paul, I have a question regarding the AWD system on these 8Y RS3's. On the Post above you mentioned to Bob, that you can run a 245/35-19 square tire all around and that sparks my curiosity as to what tire size these cars can handle. The factory tires come in 25.3 od in the front and 25.8 od in the rear, which is a half-inch difference front and back while the square setup is the same all-around. For the longevity of our AWD systems, what should I be running staggered or square? Reading through this thread I see a wide spread of people running square tires and staggered tires and was trying to figure out essentially if you do a stagggered tire setup what od difference must be maintained. And if I do switch to a square setup or something do you have to program the computer with a scanner? or does the system auto-adjust? Coming from a Subaru STI all four of the tires had to be the same OD and if you popped a tire the replacement had to be within a few 64ths or the whole system would not be happy so, I am genuinely mind-boggled how these cars left the factory with 2 different tire sizes and how the AWD system compensates for the differences.

Kind regards,
Kishan Patel

[Paul@SupremePower]

Hi Paul, I have a question regarding the AWD system on these 8Y RS3's. On the Post above you mentioned to Bob, that you can run a 245/35-19 square tire all around and that sparks my curiosity as to what tire size these cars can handle. The factory tires come in 25.3 od in the front and 25.8 od in the rear, which is a half-inch difference front and back while the square setup is the same all-around. For the longevity of our AWD systems, what should I be running staggered or square? Reading through this thread I see a wide spread of people running square tires and staggered tires and was trying to figure out essentially if you do a stagggered tire setup what od difference must be maintained. And if I do switch to a square setup or something do you have to program the computer with a scanner? or does the system auto-adjust? Coming from a Subaru STI all four of the tires had to be the same OD and if you popped a tire the replacement had to be within a few 64ths or the whole system would not be happy so, I am genuinely mind-boggled how these cars left the factory with 2 different tire sizes and how the AWD system compensates for the differences.

Kind regards,
Kishan Patel

As with all late model MQBs so long as you keep the OD +/- 3% from Oem OD you’re good to go as far as the AWD is concerned. The 8V did have some traction control intervention if you ran staggered most any other tires than the Oem pirellis. The 8Y drivetrain is a bit different sans Haldex but I’ve not run into that so far on it and definitely not running square.

As far as staggered or square, so long as ODs, widths and offsets are proper it really comes down to use and personal preference. My 8V has 85K on it. I’ve run every possible combination of rim and tire width, both staggered and square without issue. My drivetrain is still humming along. Of course, I maintain everything at oem intervals or sooner.

For the 8Y I’ve done lots of 265 square but also 275f/255r and 285f/265r. Again based upon use and preference.

[grandpab]

I've been trying to decide what I want to do for wheel sizes. Initially I was thinking to go with 9" wide wheels with the same offset on all 4 corners. I'm not really sure if that's the route I want to go anymore though.

I've got 3 different fitments I can do with the wheels I'm looking at.

The squared set up would be 19x9 et44 with either a 20 or 25mm spacer at the front. This is what I had my heart set on, but everyone is trying to talk me out of running a spacer.

One of the staggered set ups would be 19x9.5" et25 fronts and 19x9" et50 rears. If I'm ever going to lower the car it's going to be a long time from now, so I feel like this option would be the best for me. The flush look doesn't look as nice when the car isn't lowered IMO. I don't really see anyone running 19x9 et50. I feel like it's usually et44-45. It looks like 19x9.5 et45 clears the strut though, so I don't think 19x9 et50 would be a problem.

The other staggered set up has the wheels stick out a little more. 19x9.5" et22 fronts and 19x9" et44 rears. I've also heard a 15mm spacer can cause the rear wheels to rub even at stock height and this set up would be similar to the stock wheel with a 15mm spacer. Having a flush fitment isn't really that important to me.

The tires would be square with all set ups. 265/30/19.

I don't really have any questions. Just kinda thinking out loud here and looking for anyone that's familiar with these cars to add their 2 cents.

[grandpab]

💥TE37 SAGA SL 18x9.5 +22 front 9.5 +45 rear for RS3 8Y steel brakes💥

Oh man this is a good one!

Perfect front and rear offsets with square widths and even concavity: FACE 4 !

This is the only TE37 I’ve found with this much concavity that clears the brakes and is also not too aggressive for the car needing camber or suspension mods. Bolt on and go!

Clears RS3 8Y steel brakes. Unfortunately they are 114.3 but no big deal as we can drill em for ya.

Fitment is confirmed and hoping to know stock status next week.

18x9.5 +22 front FACE 4

18x9.5 +45 rear FACE 4

Pressed Graphite finish


Is this only a problem because its a 18" wheel? Would a similar wheel but 19" have any issues?

[Rs3ct888]

18x8et35

[Paul@SupremePower]

I've been trying to decide what I want to do for wheel sizes. Initially I was thinking to go with 9" wide wheels with the same offset on all 4 corners. I'm not really sure if that's the route I want to go anymore though.

I've got 3 different fitments I can do with the wheels I'm looking at.

The squared set up would be 19x9 et44 with either a 20 or 25mm spacer at the front. This is what I had my heart set on, but everyone is trying to talk me out of running a spacer.

One of the staggered set ups would be 19x9.5" et25 fronts and 19x9" et50 rears. If I'm ever going to lower the car it's going to be a long time from now, so I feel like this option would be the best for me. The flush look doesn't look as nice when the car isn't lowered IMO. I don't really see anyone running 19x9 et50. I feel like it's usually et44-45. It looks like 19x9.5 et45 clears the strut though, so I don't think 19x9 et50 would be a problem.

The other staggered set up has the wheels stick out a little more. 19x9.5" et22 fronts and 19x9" et44 rears. I've also heard a 15mm spacer can cause the rear wheels to rub even at stock height and this set up would be similar to the stock wheel with a 15mm spacer. Having a flush fitment isn't really that important to me.

The tires would be square with all set ups. 265/30/19.

I don't really have any questions. Just kinda thinking out loud here and looking for anyone that's familiar with these cars to add their 2 cents.

Shoot me an email


Is this only a problem because it’s a 18" wheel? Would a similar wheel but 19" have any issues?

It’s brake clearance and available useable specs. This is it at the moment

[grandpab]

Center bore is 57.1mm right?

[KJPATEL35]

As with all late model MQBs so long as you keep the OD +/- 3% from Oem OD you’re good to go as far as the AWD is concerned. The 8V did have some traction control intervention if you ran staggered most any other tires than the Oem pirellis. The 8Y drivetrain is a bit different sans Haldex but I’ve not run into that so far on it and definitely not running square.

As far as staggered or square, so long as ODs, widths and offsets are proper it really comes down to use and personal preference. My 8V has 85K on it. I’ve run every possible combination of rim and tire width, both staggered and square without issue. My drivetrain is still humming along. Of course, I maintain everything at oem intervals or sooner.

For the 8Y I’ve done lots of 265 square but also 275f/255r and 285f/265r. Again based upon use and preference.

Paul, I appreciate the insight on this matter. I have a set of 18-inch wheels which I would like to use for my winter setup with 245/40 tires all around. I did the math and its within that 3 percent difference you said, would the tire shop have to plug into the car and make the car relearn the difference in tire size or is it just a swap the wheel and tires and drive? Thank you

[Paul@SupremePower]

Paul, I appreciate the insight on this matter. I have a set of 18-inch wheels which I would like to use for my winter setup with 245/40 tires all around. I did the math and its within that 3 percent difference you said, would the tire shop have to plug into the car and make the car relearn the difference in tire size or is it just a swap the wheel and tires and drive? Thank you

245/40-18 is solid. Nope just bolt up and go.

[ec2k1gt]

Paul, any chance you've sold any 5x112 TE37 SL Saga's? I just saw that they sell 18x9.5 +20 which would work in the front paired with a 18x8.5 +42 in the rear.

[Paul@SupremePower]

Paul, any chance you've sold any 5x112 TE37 SL Saga's? I just saw that they sell 18x9.5 +20 which would work in the front paired with a 18x8.5 +42 in the rear.

Yup. I’ve done the 18x9.5 +20 front with 9.5 +45 rear pictured below. Both are face 4. We can also stagger with the 8.5 but they will be flat faced in rear. Face 1 or 2.

https://hosting.photobucket.com/images/jj283/supremepowerparts/IMG_5963_vm8nofFiq3NwR6XUowLDLS.jpeg?width=1920&height=1080&fit=bounds

[ec2k1gt]

Yup. I’ve done the 18x9.5 +20 front with 9.5 +45 rear pictured below. Both are face 4. We can also stagger with the 8.5 but they will be flat faced in rear. Face 1 or 2.

https://hosting.photobucket.com/images/jj283/supremepowerparts/IMG_5963_vm8nofFiq3NwR6XUowLDLS.jpeg?width=1920&height=1080&fit=bounds

Where these 5x112 or were they re-drilled to achieve that? I believe the setup I came across was face 5 fronts (9.5 et 20) and face 3 rears (8.5 et 42) in 5x112 which is great as you avoid having to re-drill however I'm a bit concerned with the difference in concavity between face 3 and face 5.

[Paul@SupremePower]

Where these 5x112 or were they re-drilled to achieve that? I believe the setup I came across was face 5 fronts (9.5 et 20) and face 3 rears (8.5 et 42) in 5x112 which is great as you avoid having to re-drill however I'm a bit concerned with the difference in concavity between face 3 and face 5.

Yes we drill them from 114.3. I investigated all these specs about 2 years ago trying to land on the best option. The face 5 is 9.5 +20 and in 5x112 but there’s no usable spec for the rear that’s also face 5. Most people do not want deeper fronts so a square face 4 in 9.5set up was the best move even being a drill. 114.3 to 112 is such a minor modification to the bore that it’s no big deal.

[rev_hi]

Is that fitment an option for the 8Y cars with ceramic brakes as well?

[Paul@SupremePower]

Is that fitment an option for the 8Y cars with ceramic brakes as well?

Sadly no. Doesn’t clear. I have Isweep CG12 in good 18” fitment that clear CCB. They are really the only off the shelf 18” that do.

[rev_hi]

My bad! I thought they were 19s. Thanks Paul!

[vsneaky]

Finally got the advans installed. Thanks for the hookup Paul!
https://i.imgur.com/cQA0d2S.jpeg
https://i.imgur.com/RwNoCsz.jpeg

[rev_hi]

I love these! Are these RZIIs? What are the specs?

[vsneaky]

Specs here, it's a match made in heaven



Advan RSIII
Front: 19x9.5 +38 with 15mm spacer
Back: 19x8.5 +45

[ec2k1gt]

Had a chance to test fit my TE37's however fitment feels a little tight between the wheel and the rear shock. I know there are a few people running similar width and offset in the rear and was curious if you have run into issues with rubbing against the rear shock.

Wheel Specs: 18X9.5 +45
Tire Specs: 265/35/18 Michelin PS4S

https://live.staticflickr.com/65535/54001791031_ce81ae7934_c.jpg

https://live.staticflickr.com/65535/54002028248_77bcf6701c_c.jpg

https://live.staticflickr.com/65535/54000887017_590dfff149_c.jpg

[Paul@SupremePower]

Had a chance to test fit my TE37's however fitment feels a little tight between the wheel and the rear shock. I know there are a few people running similar width and offset in the rear and was curious if you have run into issues with rubbing against the rear shock.

Wheel Specs: 18X9.5 +45
Tire Specs: 265/35/18 Michelin PS4S

https://live.staticflickr.com/65535/54001791031_ce81ae7934_c.jpg

https://live.staticflickr.com/65535/54002028248_77bcf6701c_c.jpg

https://live.staticflickr.com/65535/54000887017_590dfff149_c.jpg

9.5 +45 with 265 is definitely close in the rear but works. You really need to check this when the car is on the ground and the suspension is loaded. The geometry is not the same lifted.

That said, so long as your rear camber settings are in Oem range this spec clears. It’s my go-to spec for the rear and have done it many many times.

[ec2k1gt]

9.5 +45 with 265 is definitely close in the rear but works. You really need to check this when the car is on the ground and the suspension is loaded. The geometry is not the same lifted.

That said, so long as your rear camber settings are in Oem range this spec clears. It’s my go-to spec for the rear and have done it many many times.

Thanks Paul! This is exactly what I wanted to hear, appreciate the input man!

[Paul@SupremePower]

Thanks Paul! This is exactly what I wanted to hear, appreciate the input man!

👊👊👊

[Yes2m3cs]

Finally got the advans installed. Thanks for the hookup Paul!
https://i.imgur.com/cQA0d2S.jpeg
https://i.imgur.com/RwNoCsz.jpeg

Looks amazing brother! Stock tire sizes?

[Paul@SupremePower]

Finally got the advans installed. Thanks for the hookup Paul!
https://i.imgur.com/cQA0d2S.jpeg
https://i.imgur.com/RwNoCsz.jpeg

Omg how did I miss your post? Looks amazing!

[vsneaky]

Looks amazing brother! Stock tire sizes?

Stock P-Zeros here. I'll probably go wider to 275/255 when it's time to replace.

Stock wheels are for winter now and running Michelin PA4 245/35.

[ec2k1gt]

They're on, no issues clearing the shock however it is really really close to the fuel filler shielding. Going to take her out for a drive later and pull the rear right to ensure it's not rubbing against it.

https://live.staticflickr.com/65535/54008778180_d00d05ee27_h.jpg

[Paul@SupremePower]

They're on, no issues clearing the shock however it is really really close to the fuel filler shielding. Going to take her out for a drive later and pull the rear right to ensure it's not rubbing against it.

https://live.staticflickr.com/65535/54008778180_d00d05ee27_h.jpg


Yep. This is identical to 8V fitment in rear. Closest point at these specs is the fuel tube. But you’re good. If it clears it clears.

[Rguy]

Fuck that looks good

[Yes2m3cs]

They're on, no issues clearing the shock however it is really really close to the fuel filler shielding. Going to take her out for a drive later and pull the rear right to ensure it's not rubbing against it.

https://live.staticflickr.com/65535/54008778180_d00d05ee27_h.jpg

Looks great man! Are you lowered?

[ec2k1gt]

Yep. This is identical to 8V fitment in rear. Closest point at these specs is the fuel tube. But you’re good. If it clears it clears.

Good to know! Appreciate all your help man!


Fuck that looks good

Thanks Man!


Looks great man! Are you lowered?

Thanks man! It's sitting on EMD springs.

[Rguy]

Looks like Apex wheels is doing a set of 19s for rs3 8y. Praise be.

[2point8]

Looks like Apex wheels is doing a set of 19s for rs3 8y. Praise be.

https://apexwheels.com/vehicles/audi/rs-3/8y-rs-3#construction=&design=ml-10rt&finish=machined-lip-anthracite&frontQty=2&frontSize=18x95-et20&rearQty=2&rearSize=18x9-et42

Looks like 19x9.5 +20 in front and 19x9 +42 in the rear.

https://cdn.sanity.io/images/c8ihu5xk/production/a7063cd9b12836689d8e07a13985ce73e1313e26-2000x2000.png?fm=webp&w=600&h=600&q=80

[Rguy]

Pre-ordered a set in motorsports gold.

[RS3_by_the_Sea]

Anyone come across any photos (obviously prototype at this stage) of them mounted on a 8Y?

[ShakaAyuli]

Is there a reason you cant run the same ET front to rear? Would +22 not fit in the back?

[ec2k1gt]

Is there a reason you cant run the same ET front to rear? Would +22 not fit in the back?

+22 in the rear would poke out well past the rear quarters,

[ShakaAyuli]

gotcha so sounds like getting 19x9.5 +45 square and spacing out the front wheels is the best option for aggressive concave/dish. Turns out my car came with the ceramic front brakes, are there any wheels/sizes known to fit these or ones to avoid?

[Paul@SupremePower]

gotcha so sounds like getting 19x9.5 +45 square and spacing out the front wheels is the best option for aggressive concave/dish. Turns out my car came with the ceramic front brakes, are there any wheels/sizes known to fit these or ones to avoid?

The barrel on most 19” should clear. 18” are very limited for CCB. Like one or 2 possible in off the shelf fits.

[Jetdriver]

Has anyone who's gone square on an 8Y notice a difference in handling (understeer)?

[grandpab]

Can I share wheels that aren't from Supreme Power in this thread? I don't want to overstep and advertise another company, but I don't want to make my own thread either. lol

[Paul@SupremePower]

Can I share wheels that aren't from Supreme Power in this thread? I don't want to overstep and advertise another company, but I don't want to make my own thread either. lol

Yeah all good.

[grandpab]

Yeah all good.

Thanks.

Not sure how everyone is gonna feel about these, but I'm excited for them.

19x9.5 et25, 19x9 et44 by ORT Forged

https://i.imgur.com/RemTKgI.png
https://i.imgur.com/nFApL8L.png

[993140]

Not sure how everyone is gonna feel about these, but I'm excited for them.They are the wheels you liked and got excited about. That's all that matters...[:)]

[Paul@SupremePower]

Thanks.

Not sure how everyone is gonna feel about these, but I'm excited for them.

19x9.5 et25, 19x9 et44 by ORT Forged



I like em. My guess is people will complain they are TE37 reps. But whatever. I’ve seen lots of those and quite honestly these look to be the nicest. I love the finish.

What tire sizing you gonna do?

[grandpab]

I like em. My guess is people will complain they are TE37 reps. But whatever. I’ve seen lots of those and quite honestly these look to be the nicest. I love the finish.

What tire sizing you gonna do?

Thanks and yea, that's what I mean, with the reps. There's a M2 running around with some in bronze and they look sooo good on his car. When I saw them I didn't think I'd be making a bad decision, but I had to have a glossy silver.

Just the stock 265/30, but on all 4.

[Paul@SupremePower]

Thanks. There's a M2 running around with some in bronze and they look sooo good on his car. I wanted a glossy silver.

Just the stock 265/30, but on all 4.

Your silver is real close to Rays Mercury Silver. Real nice.

[grandpab]

We'll have to see what the other wheels look like. So far they only got 2 of them in stock, but the other 2 should be arriving today. I got a feeling those pictures are the front wheels and the rear wheels aren't going to have near as much lip. I just kinda left that alone. I didn't bring it up and decided to just let it be a surprise. I'll rock them however they end up.

I did get a killer deal on them though. I wasn't really planning on buying wheels, but when I reached out to them they gave me an offer I had a hard time refusing.

[ejp]

Hey folks,

I wanted to share some photos of my snow wheels/tires. I wanted a square wheel setup for our Colorado winters that I could rotate each season without dismounting the tires (the factory winter package comes with square tires, but on staggered wheels that would need to be dis/remounted to rotate front-to-back). I decided to go with a tire size that would match the factory winter package size (235/35R19) and as a bonus, there is no concern about clearing the brakes with the 19's. The ride quality seems unchanged from factory...it remains to be seen whether I'll have any issues bumping off of slushy potholes in the winter on low profile 19's.

The folks at Neuspeed were very helpful to me, and I went with a set of their 8" RSe10 +45mm offset in black with a set of Michelin Alpin PA4's mounted and balanced. The wheels look a lot like the factory black optics wheels - just with a deeper inset and sharper features. I would easily mistake these for the factory wheels. In order to ensure proper fit, I'm running longer wheel bolts and 20mm spacers up front. I think that they look pretty good (especially for a relatively inexpensive winter set), and do not sit too far inside the wheel arches. I think that I spent around $3200 all-in (wheels, tires, spacers, TPMS, and wheel bolts mounted & balanced). It comes in at a similar price to the factory winter package, but with the Michelin Alpin PA4's (which I prefer to the factory Pirellis) and they're on a square wheel setup, which can be rotated each season without dismounting the tires.

If you're looking for a set of good winter wheels that match the factory spec, I'm quite happy with how these worked out.

Good luck,
-EJP

333872333873333874333875333876

[grandpab]

Nearly there...

https://i.imgur.com/FtQn0v7.jpeg

[EdgarFriendly]

Hey folks,

I wanted to share some photos of my snow wheels/tires. I wanted a square wheel setup for our Colorado winters that I could rotate each season without dismounting the tires (the factory winter package comes with square tires, but on staggered wheels that would need to be dis/remounted to rotate front-to-back). I decided to go with a tire size that would match the factory winter package size (235/35R19) and as a bonus, there is no concern about clearing the brakes with the 19's. The ride quality seems unchanged from factory...it remains to be seen whether I'll have any issues bumping off of slushy potholes in the winter on low profile 19's.

The folks at Neuspeed were very helpful to me, and I went with a set of their 8" RSe10 +45mm offset in black with a set of Michelin Alpin PA4's mounted and balanced. The wheels look a lot like the factory black optics wheels - just with a deeper inset and sharper features. I would easily mistake these for the factory wheels. In order to ensure proper fit, I'm running longer wheel bolts and 20mm spacers up front. I think that they look pretty good (especially for a relatively inexpensive winter set), and do not sit too far inside the wheel arches. I think that I spent around $3200 all-in (wheels, tires, spacers, TPMS, and wheel bolts mounted & balanced). It comes in at a similar price to the factory winter package, but with the Michelin Alpin PA4's (which I prefer to the factory Pirellis) and they're on a square wheel setup, which can be rotated each season without dismounting the tires.

If you're looking for a set of good winter wheels that match the factory spec, I'm quite happy with how these worked out.

Good luck,
-EJP

333872333873333874333875333876Nice looking setup. I did a similar setup on my wife's 8Y. 19x8.5 Enkei's in a 35mm offset. 10mm spacers up front. Running on 245 Michelin Alpins as well.

https://uploads.tapatalk-cdn.com/20241102/73ac9e83d898067b710645f87527ef25.jpghttps://uploads.tapatalk-cdn.com/20241102/4ae3a0732247428c875693d567af8c04.jpg

[UberGolf]

Would the iSweep CP12 in 18x9 et 45 work with 265/35/18 if I used a 20 mm spacer in the front? I have tires that are almost new from my last car. Hoping I could use them on the RS3.


Sent from my iPhone using Tapatalk

[EdgarFriendly]

My understanding is 18in wheels are super tight up front due to the caliper size and smaller wheel diameter. Wheel weights need to be carefully placed as well. The 20mm spacer would get you out to where you'd clear the caliper (from the backside of the wheel spokes) in that regard.

Also the 18in wheels are smaller than factory so overall rolling diameter, I believe, would need a 40 series sidewall tire, not 35, to match the 19in overall diameter. Lookup a tire/wheel diameter calculator online and you can play with sizes there to tell you the variance between stock and what you're proposing.

[grandpab]

19x9.5" et25 and 19x9" et44
https://i.imgur.com/TSLccEi.jpg

[Jetdriver]

19x9.5" et25 and 19x9" et44
https://i.imgur.com/TSLccEi.jpgNow that is nice.

Sent from my SM-F721U using Audizine Forum mobile app (https://r.tapatalk.com/byo?rid=87676)

[9kracing]

I'm hoping Paul figures out a 19" TE37 solution for the 8Y sooner than later

[Paul@SupremePower]

I'm hoping Paul figures out a 19" TE37 solution for the 8Y sooner than later

Ugh. I know. Been trying to find a reasonable 19” spec since the 8Y launched. I mean, there are a couple options but they are front staggered 9.5 and 8.5. Due to the spec, they are much deeper up front…face 3 front with face 1 rear. No one really wants that so I don’t bother with it.

That said, I may have just found a possibility in 19x9.5….it needs a 20-25mm spacer up front for flush but likely to clear brakes as well. But its square concavity.

I’ll know for sure by next week.

[Paul@SupremePower]

Would the iSweep CP12 in 18x9 et 45 work with 265/35/18 if I used a 20 mm spacer in the front? I have tires that are almost new from my last car. Hoping I could use them on the RS3.


Sent from my iPhone using Tapatalk

Yes

[UberGolf]

Yes

Thanks! Just got my RS3, and buying wheels and tires for this car is much more complicated than any other car I have owned.


Sent from my iPhone using Tapatalk

[RScheiss3]

Hey Paul

Would a square 19x9.5 +42 fit pending concavity of course? Or what would you recommend as a square setup if it were a perfect custom offset to clear rear brakes/strut as well as reducing the front spacer needed?

- Zach

[Paul@SupremePower]

Thanks! Just got my RS3, and buying wheels and tires for this car is much more complicated than any other car I have owned.


Sent from my iPhone using Tapatalk

Welcome to my nightmare 🙃😃


Hey Paul

Would a square 19x9.5 +42 fit pending concavity of course? Or what would you recommend as a square setup if it were a perfect custom offset to clear rear brakes/strut as well as reducing the front spacer needed?

- Zach

That’s not a good square spec. If it cleared the front brakes it would get completely swallowed by the fender. It would sit 11mm more inbound than the Oem 9 +25. Not a great look. Conversely, on the rear the spec is slightly aggressive so a touch of negative camber would be needed to run 265s and clear.


It really depends on intended use, ride height, alignment, tire size and brand but 9.5 +20/+45 is move.

Shoot me an email if you’d like to discuss in more detail.

[DLL]

Using Apex SM-10 18 x 9, ET42, 5 x 112 in square configuration, their 20 mm front spacers. Nicely made, good price, very good advice from them.
Mounted Kumho Ecsta 730 XL 255/35R-18 heat cycled from Tire Rack for track days, very impressive at Thunderhill with some fast cars.
Just switched to Blizzak WS90 same size for winter here in Tahoe.

[9kracing]

Ugh. I know. Been trying to find a reasonable 19” spec since the 8Y launched. I mean, there are a couple options but they are front staggered 9.5 and 8.5. Due to the spec, they are much deeper up front…face 3 front with face 1 rear. No one really wants that so I don’t bother with it.

That said, I may have just found a possibility in 19x9.5….it needs a 20-25mm spacer up front for flush but likely to clear brakes as well. But its square concavity.

I’ll know for sure by next week.


What about redrilling Saga S-Plus 19s?

5x114

19x9.5 +45 (face 2)
19x9.5 +35 (face 2)

Would require 10-15mm spacers in the front, and wouldn't be super concave, but it's the best I've got so far lol

I suppose you could run the 19x9.5 +25 5x112 which wouldn't even need a redrill or spacer, but it's face 3, so you'd be mixing concavities.

[Paul@SupremePower]

What about redrilling Saga S-Plus 19s?

5x114

19x9.5 +45 (face 2)
19x9.5 +35 (face 2)

Would require 10-15mm spacers in the front, and wouldn't be super concave, but it's the best I've got so far lol

I suppose you could run the 19x9.5 +25 5x112 which wouldn't even need a redrill or spacer, but it's face 3, so you'd be mixing concavities.

Yes sir! These were the ones I was referencing above. Took me a while to confirm clearance but I got it done:



TE37 Saga S Plus

Front options:

19x9.5 +35 5-114.3 face 2
19x9.5 +38 5-112 face 2

Both above clear with no spacer but you’d want to run a 15mm to 20mm for flush


Rear:

19x9.5 +45 114.3 face 2

Above is flush. No spacer needed.

[smf4444]

265/35-18's have any rubbing issues lowered 1 inch front .8 inch rear?

[Paul@SupremePower]

265/35-18's have any rubbing issues lowered 1 inch front .8 inch rear?

I can’t answer that without the rim width and offset.

[SlowestS4Here]

Thoughts on the Advan RZii at 19x9.5 +50?
Suggested spacers and tire size? ....or is this a no go?

[Paul@SupremePower]

Thoughts on the Advan RZii at 19x9.5 +50?
Suggested spacers and tire size? ....or is this a no go?

9.5 +50 will hit the rear shock so needs 5mm spacer. Front same deal but I don’t know if it clears the brakes or what size spacer is needed. That said, you’re looking a 30mm spacer at least to make it look right.

[SlowestS4Here]

9.5 +50 will hit the rear shock so needs 5mm spacer. Front same deal but I don’t know if it clears the brakes or what size spacer is needed. That said, you’re looking a 30mm spacer at least to make it look right.

Thx Paul.
1.2" spacer....geez!

[Paul@SupremePower]

Thx Paul.
1.2" spacer....geez!

Yeah 9.5 +50 is a hella weak spec for the front. You could get away with 25mm provided it’s also enough to clear the brakes.

[9kracing]

Paul I'm thinking of doing a custom set of wheels, would these specs work?

19x9

+20 in front
+45 in rear

265/35 square

[Paul@SupremePower]

Paul I'm thinking of doing a custom set of wheels, would these specs work?

19x9

+20 in front
+45 in rear

265/35 square

As far as brakes Sure. If full custom we can get most styles to clear. But the spec won’t look that great. The 20 will sit even more inbound than the Oem but the rear will be close to flush.

Any reason you want this particular spec?

[9kracing]

As far as brakes Sure. If full custom we can get most styles to clear. But the spec won’t look that great. The 20 will sit even more inbound than the Oem but the rear will be close to flush.

Any reason you want this particular spec?

Maybe I'm confused.

I thought the OEM wheels were 19x9 +25 in the front?

19x8 +46 in the rear?

So I thought I was going to be 5MM farther out than stock in the front.

Maybe I have the factory specs wrong.

[9kracing]

"Compared to the 8V RS3, which utilizes similar offset wheels both front and rear, the 8Y RS3 has a more unique factory fitment with significantly lower offset 19x9" ET25 front wheels, and higher offset 19x8" ET46 rear wheels."

https://apexwheels.com/fitment-guides/audi/rs-3/audi-8y-rs-3-wheel-and-tire-fitment-guide

[Paul@SupremePower]

"Compared to the 8V RS3, which utilizes similar offset wheels both front and rear, the 8Y RS3 has a more unique factory fitment with significantly lower offset 19x9" ET25 front wheels, and higher offset 19x8" ET46 rear wheels."

https://apexwheels.com/fitment-guides/audi/rs-3/audi-8y-rs-3-wheel-and-tire-fitment-guide

Brain fart. My bad. Yes front is 5mm more outboard than Oem fronts. So this spec combo is ok. I’d like a 9 +15 up front for flush but it’s doable.

The guide statement is a little misleading…..the offset is relative to the width regarding net stance. So unless you are comparing identical widths saying “higher” or “lower” offset is meaningless.

[9kracing]

I'm going to drop it on KWs so I want to make sure there's no rubbing on 265 square no matter what tire I run, hence the slightly more conservative specs.

[Paul@SupremePower]

I'm going to drop it on KWs so I want to make sure there's no rubbing on 265 square no matter what tire I run, hence the slightly more conservative specs.

So long as you’re not slamming it 265 is solid here. You can do 9 +15 up front as well and clear most compounds.

I’ve done a bunch of 275 R compounds on 9.5 +25 up front which sits identically to your 9 +20 and clears no problem.

[9kracing]

So long as you’re not slamming it 265 is solid here. You can do 9 +15 up front as well and clear most compounds.

I’ve done a bunch of 275 R compounds on 9.5 +25 up front which sits identically to your 9 +20 and clears no problem.


This post made me nervous, I figure better to err on the side of safety.

https://www.audizine.com/forum/showthread.php/997461-Apex-forged-wheels-installed-Undiluted-true-feedback?p=15124467&viewfull=1#post15124467

[estoniancartel]

So.. how close is too close?

https://uploads.tapatalk-cdn.com/20250202/32eb5ac93ad1dc38b16d049cd7338e4b.jpg

[Paul@SupremePower]

So.. how close is too close?

https://uploads.tapatalk-cdn.com/20250202/32eb5ac93ad1dc38b16d049cd7338e4b.jpg

If it clears it clears 😈😈😈

[estoniancartel]

If it clears it clears 😈😈😈

Just following up in case this info can be useful for anyone. I already had these wheels and I am going to use them for a winter setup.

OZ Superturismo LM 18x8 et35
Spokes easily clear both front and rear brakes without spacers. Front is obviously sunken in compared to stock.

No spacers:
- Barrel clears front brake with 3mm clearance. This seems to be an allowable clearance for deflection according to Brembo and a few other brake manufacturers.

10+ front spacer:
- Barrel clears easily with 5mm+ clearance. The barrels on these wheels seem to taper out from the face to the inside.

I also have a set of 19x8 OZ Ultraleggera HLTs which also cleared eveything no problem. I'm going with the 18s for a larger tire selection.

I'll be running 235/40R18 Blizzak WS90s on the Superturismos with a 10mm spacer up front.

For anyone considering running these wheels: I confirmed with Tire Rack that they use a (stupid) R12 ball seat which is hard to find. You cannot use an R13 or R14 ball seat.

[stummiller]

TPMS Question. Can anyone confirm these sensors linked below from tprms.com work for the 8Y (mine is a 2023)?
Their description says it works for OEM part numbers 5Q0907275F or 5Q0907275B which are the ones listed for my car, but wondering if they need special coding for the 8Y to work? TIA

https://www.tpms.com/Audi-Upro-TPMS-Sensor-5Q0907275B-433MHz-p/upro0047-audi.htm

[itsjustjed]

TPMS Question. Can anyone confirm these sensors linked below from tprms.com work for the 8Y (mine is a 2023)?
Their description says it works for OEM part numbers 5Q0907275F or 5Q0907275B which are the ones listed for my car, but wondering if they need special coding for the 8Y to work? TIA

https://www.tpms.com/Audi-Upro-TPMS-Sensor-5Q0907275B-433MHz-p/upro0047-audi.htm

Those are correct. I had 5Q0907275B for my winter wheel and tire set up on my 2023 RS3. I bought them form the same vendor.

Your tire installer will activate them, no coding required otherwise.

[Extonsq5]

Great information thru this thread, thanks to all. I have a specific tire fitment question I'm hoping someone can shed some light on. I have a 2024 RS3 with wheel setup currently 19x9.5 around (16 offset front 46 offset rear). I mounted up the stock Pirellis and while the fronts looks OK - the rears are very stretched and look wise not what I'm looking for. Any thoughts on max tire sizes in this 19 inch that can fit front and rear (stock suspension - not lowered)?

[Paul@SupremePower]

Great information thru this thread, thanks to all. I have a specific tire fitment question I'm hoping someone can shed some light on. I have a 2024 RS3 with wheel setup currently 19x9.5 around (16 offset front 46 offset rear). I mounted up the stock Pirellis and while the fronts looks OK - the rears are very stretched and look wise not what I'm looking for. Any thoughts on max tire sizes in this 19 inch that can fit front and rear (stock suspension - not lowered)?

Yeah 9.5 is gonna stretch that 245. You want 265/30 on all corners with those specs.

[Extonsq5]

Will 255/35/19s work/fit?

[Jarbear]

I'm no photographer, but here are some Apex VS-5RS 18x9.5 et20 front (265), 18x9 et42 rear (245).

337444337443

[Jetdriver]

I've decided on the BBS RE-V7's. They've been my favorite wheel for years. My dilemma is the color. Gold or Diamond Silver. Caveats up front are... Diamond Silver is special order. July ETA and tariff drama could effect that (and of course, price). Diamond Silver is more classic. Gold is.... baller. [:D] I like gold when I see it on other cars. Will I like it on mine? I don't know. 2024 Kemora Grey. I do think gold would look pretty killer, as long as it's not a real orange-looking gold (some golds are just too gold, if you know what I mean). I don't like mustard-looking gold wheels. I does appear that the BBS gold is a lighter, more champagne gold in pics; to me anyway.

[element241]

I'm no photographer, but here are some Apex VS-5RS 18x9.5 et20 front (265), 18x9 et42 rear (245).

337444337443

Love the look of these wheels on this car! [up] Do you have any suspension mods in these photos?

[Jarbear]

Love the look of these wheels on this car! [up]

Thanks [:D]


Do you have any suspension mods in these photos?

The suspension is completely stock as of right now. I have a set of RacingLine springs and 034 caster plates waiting to be installed.

[wpzr]

My turn
Front 19x9 ET15
Rear 19x9 ET42
255/30/19 square with Michelin PS4 :)

https://i.imgur.com/IBtv86G.jpeg
https://i.imgur.com/RKD8cof.jpeg
https://i.imgur.com/NLAWGii.jpeg

[UberGolf]

That looks great! What are the wheels?


Sent from my iPhone using Tapatalk

[Jetdriver]

My turn
Front 19x9 ET15
Rear 19x9 ET42
255/30/19 square with Michelin PS4 :)

https://i.imgur.com/IBtv86G.jpeg
https://i.imgur.com/RKD8cof.jpeg
https://i.imgur.com/NLAWGii.jpegAny noticeable difference in handling with the square setup?

Sent from my SM-F721U using Audizine Forum mobile app (https://r.tapatalk.com/byo?rid=87676)

[wpzr]

That looks great! What are the wheels?


Sent from my iPhone using Tapatalk

Its new company that my friend started. I don't believe they have website yet, but its lightweight forged wheels


Any noticeable difference in handling with the square setup?

Sent from my SM-F721U using Audizine Forum mobile app (https://r.tapatalk.com/byo?rid=87676)

Handling feels great. I just came back from wookies in the woods, drove a lot of twisties and dragon. Unfortunately, I did not try same roads with regular staggered setup for reference.

[Jetdriver]

Its new company that my friend started. I don't believe they have website yet, but its lightweight forged wheels



Handling feels great. I just came back from wookies in the woods, drove a lot of twisties and dragon. Unfortunately, I did not try same roads with regular staggered setup for reference.Are those ORT wheels?

Sent from my motorola razr plus 2024 using Tapatalk