Rear BBK Voshmods

[hellovaras]

Looks good. Seems inexpensive. Is this the full kit?

https://voshmods.com/collections/b8/products/b8-big-baller?variant=22719186174010https://uploads.tapatalk-cdn.com/20190223/f3280a19787a4ec70854393208e5388b.jpg

Sent from my Pixel 2 XL using Tapatalk

[voshmag]

Looks good. Seems inexpensive. Is this the full kit?

https://voshmods.com/collections/b8/products/b8-big-baller?variant=22719186174010https://uploads.tapatalk-cdn.com/20190223/f3280a19787a4ec70854393208e5388b.jpg

Sent from my Pixel 2 XL using TapatalkThe kit pictured include everything needed exept rotor and brembo brake pads. There is also a kit with no calipers for rhe diy guys.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[blackfunk]

The kit pictured include everything needed exept rotor and brembo brake pads. There is also a kit with no calipers for rhe diy guys.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)Does that kit utilize the stock rotor?

Sent from my SM-N950U using Tapatalk

[Strong Man]

With which size of rotors it can be used ?

[voshmag]

With which size of rotors it can be used ?Kit is designed for 356mm A8 rear rotor

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

Does that kit utilize the stock rotor?

Sent from my SM-N950U using TapatalkStock rotor was not an option, the larger 356mm A8 rear rotor is used for my kit.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[whats77inaname]

Oooooh, you're local. Can I see this in person?

[voshmag]

Oooooh, you're local. Can I see this in person?If you can catch up to my beta tester.... She is pretty fast. Lol

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[blackfunk]

I'm going to assume that the A8 rotors are a direct swap and the hub will not need to be altered?

Sent from my SM-N950U using Tapatalk

[voshmag]

I'm going to assume that the A8 rotors are a direct swap and the hub will not need to be altered?

Sent from my SM-N950U using TapatalkIndeed indeed. Installs in about hours, no special tools needed. A8 356 rotor is used, everything is direct fit... Only fits one way so you can have a dady daughter date and install it.

Also I include plug and play harness for the Tesla caliper and requires zero coding and braided lines that are oem fitment as well, the rubber grommet fits perfect into oem mount.

Vosh for prez? Lol jk

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[Chunchoy14]

I just bought the bracket/hardware/harness kit. What year does the q7 calipers come off of? Also model s is there only one type of parking brake?

Sent from my LM-V350 using Tapatalk

[techracer]

We need a matching front b9 kit so the custom powder coat will match [emoji16]

Sent from my SM-G955U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[waxxonMTL]

good job for that innovative product release.

[voshmag]

I just bought the bracket/hardware/harness kit. What year does the q7 calipers come off of? Also model s is there only one type of parking brake?

Sent from my LM-V350 using TapatalkBrembo 4 piston is off Touareg/q7/Cayenne. When buying on bay search for 2004 Touareg (they are all same caliper.. At least in the states) but vw calipers tend to be listed cheaper.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

We need a matching front b9 kit so the custom powder coat will match [emoji16]

Sent from my SM-G955U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)My front kit should be out next month... At enthusiast prices. I do my best to avoid 4 ring tax. Im just a car guy who decide to put his skills into this. I have 2 more designs made (mqb and b8/8.5/c7 fronts).. Staggering my releases beacause beta kits are expensive, then taking a break for a few months to enjoy family and my own build.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[whiped]

Well, I just ordered a kit. Should be a good upgrade over my current single pot 356x22mm setup off the A8/S6/S6/RS7 [wrench]

[ModItNow]

Nice kit! And your doing a b9 front kit too? Yes! I'll Need front brakes towards the end of this year

Sent from my SM-G965U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[tylern012]

My front kit should be out next month... At enthusiast prices. I do my best to avoid 4 ring tax. Im just a car guy who decide to put his skills into this. I have 2 more designs made (mqb and b8/8.5/c7 fronts).. Staggering my releases beacause beta kits are expensive, then taking a break for a few months to enjoy family and my own build.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

Totally in for a combo front and rear set!!! I’ll be the first buyer for a combo front and rear set depending on what you use for the fronts. I will need new brakes in about a month!


Sent from my iPhone using Tapatalk

[Gberg888]

Nothing like having a bigger rotor in the rear than the front... i have the q5 brembos with 345 stock rotors... not going to a 356 in the rear...

[voshmag]

Totally in for a combo front and rear set!!! I’ll be the first buyer for a combo front and rear set depending on what you use for the fronts. I will need new brakes in about a month!


Sent from my iPhone using TapatalkMission top secret squirrel

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[Strong Man]

One more question... It's the definitely very nice upgrade, but... did someone ever measure rear brake temperature ?! I'm doing time-attack 4-5 times in a season and I do measure temperature of front and real brakes.
Front brakes in our cars (S4/S5) are really weak and for serious loads need to be upgraded, but the real brakes ?! I've never measured more than 200 degrees celsius in the rear, which is less then half of temperatura range of my real pads (Hawk 5.0). So, what a reason I would spend an another $900-1000 ?!

[JettaGetUpandGo]

I've never measured more than 200 degrees celsius in the rear, which is less then half of temperatura range of my real pads (Hawk 5.0). So, what a reason I would spend an another $900-1000 ?!

They look nice.

[Strong Man]

They look nice.

McLaren P1 looks nice too :)))

[tylern012]

Mission top secret squirrel

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

I’m going to hold off on buying b9 brakes in thIs case I can wait a month and see what you have to offer. I’m stoked to see what you have.


Sent from my iPhone using Tapatalk

[voshmag]

McLaren P1 looks nice too :)))Indeed they do

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

I’m going to hold off on buying b9 brakes in thIs case I can wait a month and see what you have to offer. I’m stoked to see what you have.


Sent from my iPhone using TapatalkThe front kit will be my Hoorah for the community then will be taking a few months off of designing. My front kit is defiantly an off the beaten path approach... Should be fun.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

McLaren P1 looks nice too :)))
There is no contest that 4 pistons is superior to own rears. Is it needed, not entirely however neither is 90 percent of the stuff we do.

As for looks...Rear kit is kinda like not skipping leg day. Just brings balance esthetically. Tiny little rears and huge fronts looks goofy.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[chaos2984]

In to see what the front kit looks like and cost. This is a great kit. What pads are you using anything that fits a q7.

Also with that parking brake design is there any maintenance needed for the pads since they will not really get used?

Can we specify color of the powder coat?

[voshmag]

In to see what the front kit looks like and cost. This is a great kit. What pads are you using anything that fits a q7.

Also with that parking brake design is there any maintenance needed for the pads since they will not really get used?Indeed pads from q7/Touareg/Cayenne. Vw stuff seems to be cheaper. And you are correct,the only real weae and tear the tesla pads see are during forsr couple hundred miles while they bed (floating caliper). I doubt you will ever need to change the tesla pads.


Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[chaos2984]

Indeed pads from q7/Touareg/Cayenne. Vw stuff seems to be cheaper. And you are correct,the only real weae and tear the tesla pads see are during forsr couple hundred miles while they bed (floating caliper). I doubt you will ever need to change the tesla pads.


Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

Cool thanks. what A8 Series rotors do we need. Also can we specify what color of powder coating?

[PeteRock]

This is an awesome setup.....my only issue is that I have a RS5 front brake setup and want to have drilled and slotted rotors that match all around so I think my only option would be to go with the Audi OEM wave rotors which are about $900 each

Decisions decisions!

Anyone know of matching drilled and slotted rotors made in 356x22 and also 365 or 380x34 other than the Audi OEM waves?


Pete

[voshmag]

Cool thanks. what A8 Series rotors do we need. Also can we specify what color of powder coating?Rear rotors from D4 A8 356x22

The following colors: Mint Green, Signal Grey, Sky Blue,Ultramarine Blue,Deep Blue, Tiffany Blue, Gloss Black,Traffic White, Bright Orange, Melon Yellow, Yellow, Red Baron, Purple

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[chaos2984]

Rear rotors from D4 A8 356x22

The following colors: Mint Green, Signal Grey, Sky Blue,Ultramarine Blue,Deep Blue, Tiffany Blue, Gloss Black,Traffic White, Bright Orange, Melon Yellow, Yellow, Red Baron, Purple

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)


Awesome. This kit gets better and better. Awesome color combo. Where did you end up getting the drilled and slotted rotors from I can only seem to find normal ones.

[chaos2984]

No pads for the tesla caliper either i take it. Where is the best place to get the pads for those?

[voshmag]

No pads for the tesla caliper either i take it. Where is the best place to get the pads for those?Pads for tesla are included! They will be used pads however never need to be replaced as they only see wear during bedding (floating caliper and have pad drag while bedding) after bedding they are only applied while parked and will last a very very long time

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

Awesome. This kit gets better and better. Awesome color combo. Where did you end up getting the drilled and slotted rotors from I can only seem to find normal ones.The ones pictured are power stop rotors. (Centers were painted wirh high temp black for looks). Bought them off autoanything for $112 dollars. They are budget rotors however I cover all costs on my beta kits so budget rotors was all I could afford. If you are doing heavy spirited drivinf I would run the blossom rotors but thosenare mega pricey. I am a big fan of "Carid" websitw for rotor... Great prices. Search for 2012 Audi a8 rotors

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

Cool thanks. what A8 Series rotors do we need. Also can we specify what color of powder coating?These are the standard color option for powder coatong. When googling put "ral" in front of to see what it looks like... Also any powdee coater will be able to Marth these colors.

Ral colors:
Mint Green, Signal Grey, Sky Blue,Ultramarine Blue,Deep Blue, Tiffany Blue, Gloss Black,Traffic White, Bright Orange, Melon Yellow, Yellow, Red Baron, Purple

If you want special powder color to match fronts you can mail me power or I can get it for you (typically 16 dollars a pound and need 5 pounds)

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[chaos2984]

I am deff picking up a set. Whats your thoughts on the red baron matching the Audi B9 red calipers?

[voshmag]

I am deff picking up a set. Whats your thoughts on the red baron matching the Audi B9 red calipers?That was why I chose red baron. I took a bunch of red sample plated and it was the closest red I could find to oem audi red... Granted it was 34 degrees outside, overcast amd pourinf down rain.... Haha. If any members want to go to a powder shop and compare RAl red colors and find closest red I will change stock red color... But for now red Barron it is.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[chaos2984]

That was why I chose red baron. I took a bunch of red sample plated and it was the closest red I could find to oem audi red... Granted it was 34 degrees outside, overcast amd pourinf down rain.... Haha. If any members want to go to a powder shop and compare RAl red colors and find closest red I will change stock red color... But for now red Barron it is.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)


Awesome. how do i order and specify what color i want. I will put my order in today. Cant wait to see your front set.

How did you set up the parking brake with vag com? Ive done a rear pad replacement before. I haven't messed around with it. Is it kinda the same thing.

[voshmag]

Awesome. how do i order and specify what color i want. I will put my order in today. Cant wait to see your front set.

How did you set up the parking brake with vag com? Ive done a rear pad replacement before. I haven't messed around with it. Is it kinda the same thing.Electric caliper is a dumb electric motor. It sends no signal back othere then that it is there (resistance). It just shuts up and does what it is told. No coding needed. Functions like own after installed.

Order on my site. Keeps me organized. Im comments specify color choice, if you forget to specify color I will email you and ask.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[chaos2984]

Electric caliper is a dumb electric motor. It sends no signal back othere then that it is there (resistance). It just shuts up and does what it is told. No coding needed. Functions like own after installed.

Order on my site. Keeps me organized. Im comments specify color choice, if you forget to specify color I will email you and ask.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)


Ok sounds good. Do you have to run it out before installing or is it already run out? Then just run it in when together and it should be ok just like changing rear pads right.

[voshmag]

Ok sounds good. Do you have to run it out before installing or is it already run out? Then just run it in when together and it should be ok just like changing rear pads right.It Will already be open. I will have install instructions for download before kits ship. The biggest thing... Make sure epb is not enabled, if you disconnect oem caliper when parking brake is enabled you will have a code as the computer sees an interupt.

The only time I had to manually run out the tesla caliper was during initial functionality testing. When you disable the tesla it winds till there is no longer pressure on pads leaving a fraction of a mm of clearance between pad and rotor. I could not get my tesla of the badly worn rotor. There was a large lip at the outer ring of the rotor and the tesla was loose but the pad was catching the ring. Was super easy to manually wind the tesla after figuring out the gearing. If this ever happends just take off the tesla motor and wind clockwise to losen

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[chaos2984]

Just bought this set up. Can't wait to get them. Will source rotors and pads now.

[techracer]

Is it possible to get 2 piece rear rotors? I also want to do 2 piece on the front when you get that one done.

Sent from my SM-G955U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

Is it possible to get 2 piece rear rotors? I also want to do 2 piece on the front when you get that one done.

Sent from my SM-G955U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)Working on this now. Have a few options I am entertaining but need time on that one. One big concern is a 356x22 could be prone to warp.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[chaos2984]

Working on this now. Have a few options I am entertaining but need time on that one. One big concern is a 356x22 could be prone to warp.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

really you think in the rear. Maybe after a hard track day it may warp. Maybe some testing with data logging with temp sensors to see.

[voshmag]

really you think in the rear. Maybe after a hard track day it may warp. Maybe some testing with data logging with temp sensors to see.My honest answer is I have no clue. I looked into having custom made. My fear is if they warp being responsible to rma them.... No fun.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[chaos2984]

My honest answer is I have no clue. I looked into having custom made. My fear is if they warp being responsible to rma them.... No fun.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

Yea I wouldn't do that. Maybe offer no warranty other than defective out of the box. Or don't get into it at all. I don't think floating rears are necessary unless you are a heavy road racer

[voshmag]

Yea I wouldn't do that. Maybe offer no warranty other than defective out of the box. Or don't get into it at all. I don't think floating rears are necessary unless you are a heavy road racerBut having a piar of 2 piece 356x22 rotors made is very expensive. Having 20 sets made the price starts getting fair. Who wants to set up a group buy... My hands are full.. Lol

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[Chunchoy14]

https://www.racingbrake.com/RB-2pc-Rotors-356x24-for-Audi-2013-A8-Q3-RS7-p/2575.htm

2 piece rotor for 950...$$$

Sent from my LM-V350 using Tapatalk

[Gberg888]

https://www.racingbrake.com/RB-2pc-Rotors-356x24-for-Audi-2013-A8-Q3-RS7-p/2575.htm

2 piece rotor for 950...$$$

Sent from my LM-V350 using Tapatalk

I had racingbrake calipers and rotors on my R32 that I tracked regularly. They can take a huge beating. I lost almost no rotor thickness after 8 track days and 3 sets of pads.

[voshmag]

https://www.instagram.com/p/BuUTSpPBUn4/?utm_source=ig_share_sheet&igshid=17042zwddeu6a

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[blackfunk]

I'm curious if with the offset change from the how does it affect wheel clearance if at all.

Sent from my SM-N950U using Tapatalk

[voshmag]

I'm curious if with the offset change from the how does it affect wheel clearance if at all.

Sent from my SM-N950U using TapatalkBig brake friendly wheels/offest still encouraged however OEM wheels cleared with 7mm spacer.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[blackfunk]

Cool thx. This is officially on the summer list of thing to get done.

Sent from my SM-N950U using Tapatalk

[Chunchoy14]

Hopefully theyll fit my current set of wheels. I had to sell 2 sets to get 1 to fit the b9 calipers. You think ill have trouble with the rears?
Theyre 19x8.5 +32. I already bought the bracket kit. Picked up the q7 and tesla calipers and rebuilding/powdercoating right now. And have the a8 rotors and q7 pads on the way. No turning back lol.https://uploads.tapatalk-cdn.com/20190302/a893ef0ac4ee47f4ace32f223a8d29ec.jpg

Sent from my LM-V350 using Tapatalk

[voshmag]

Hopefully theyll fit my current set of wheels. I had to sell 2 sets to get 1 to fit the b9 calipers. You think ill have trouble with the rears?
Theyre 19x8.5 +32. I already bought the bracket kit. Picked up the q7 and tesla calipers and rebuilding/powdercoating right now. And have the a8 rotors and q7 pads on the way. No turning back lol.https://uploads.tapatalk-cdn.com/20190302/a893ef0ac4ee47f4ace32f223a8d29ec.jpg

Sent from my LM-V350 using Tapatalkhttps://www.instagram.com/p/BuHxZG1h-36/?utm_source=ig_share_sheet&igshid=xsizo2rrheo7


I think OEM wheels are like et47 so with 7mm spacer and they clear its pretty probable you will be alright at 35 but unfortunately no promisses. Most wheels with an et35 should clear however with a limited budget and a 2 man shop (me and my wife) with my day job funding everything I did not have the luxury of testing multiple wheels. Will put an faq with known wheel fitment on my site evemtually but will just take time for people to install and report back so I can compile this data.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[techracer]

What's the cost?

Sent from my SM-G955U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

What's the cost?

Sent from my SM-G955U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)I'm just answering questions here and not trying to sell. Dont want mod trouble... Haha

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[techracer]

I'm just answering questions here and not trying to sell. Dont want mod trouble... Haha

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)Well I looked on your page and IG a d don't see it [emoji6]

Sent from my SM-G955U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[Slick_B8]

Well I looked on your page and IG a d don't see it [emoji6]

Sent from my SM-G955U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

Its on his webpage that he has linked on his instagram 😉

[whats77inaname]

Its on his webpage that he has linked on his instagram 😉

As well as on the very first page of this thread....

[whiped]

Any idea when the first sets of brackets these will ship?

I have everything else in order now just waiting on those before I start messing with things

[voshmag]

Any idea when the first sets of brackets these will ship?

I have everything else in order now just waiting on those before I start messing with thingsThat is exciting! I would estimate 3 weeks for brackets to start shipping. All braided brake lines and hardware is in hand. Brackets are about done (should be going to zinc Monday). Big holdup is adapter harness. I have audi side on hand but had to source tesla side from over seas. I think I should have everything ready to start packing in 2.5 week. This timeline is not for big baller kits, those I am standing firm at 4 weeks

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[S4Sanity]

I’m really excited for whatever you come out with for the fronts. Might do all four corners whenever your fronts come out. I’m excited


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

I’m really excited for whatever you come out with for the fronts. Might do all four corners whenever your fronts come out. I’m excited


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)I really appreciate your support and the communities. For now my lead times are what they are. I cover all costs out of pocket... All profits made for the last 5 months have gone into developing more kits and this round building up small inventory so hopeful by end of April will have much better lead times and focus on my own project. I have it plastic wrapped and tarped to keep flying metal out off it. In am really itching to finish her up.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[whats77inaname]

Am I correct to assume that this setup won't fit 18" wheels?

[Blackb8.5]

Will the RS7 C7 rear rotors work with this setup? Don't want wave rotors in the front and not in the back.

Thanks

[blackfunk]

Will the RS7 C7 rear rotors work with this setup? Don't want wave rotors in the front and not in the back.

Thanks

Smart Ass dude here......soooooooooo what do you have in the front and back now? LOL. Yeah, I know. LOL

[Blackb8.5]

Smart Ass dude here......soooooooooo what do you have in the front and back now? LOL. Yeah, I know. LOL

Wave rotors in the front, rather not have to switch to non wave rotors to match the rotors recommended for this setup.

[whiped]

Wave rotors in the front, rather not have to switch to non wave rotors to match the rotors recommended for this setup.

They will work but I wouldn't advise it. Vosh may have his own opinion on this.

If you want to run the RS7 wave rotors on the rear buy the S6/RS7 brake brackets and use your stock calipers. (I have that setup on my car except with normal rotors right now)

[voshmag]

Am I correct to assume that this setup won't fit 18" wheels?Well 356 rear will clear mostn18 wheels... But what are your goals for front. That will dictate what wheels. Personally I like the b8 19's anyways... But that is just me.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

Will the RS7 C7 rear rotors work with this setup? Don't want wave rotors in the front and not in the back.

Thanks


They will work but I wouldn't advise it. Vosh may have his own opinion on this.

If you want to run the RS7 wave rotors on the rear buy the S6/RS7 brake brackets and use your stock calipers. (I have that setup on my car except with normal rotors right now)


Well 356 rear will clear mostn18 wheels... But what are your goals for front. That will dictate what wheels. Personally I like the b8 19's anyways... But that is just me.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

Curious Whiped why you would not advise running C7 RS7 rear waves?

My kit is designed to fit 356x22mm A8 rear rotors.... same dimensions as c7 RS7 rear rotors. I don't see any logical reason why it would not work,

[whiped]

Curious Whiped why you would not advise running C7 RS7 rear waves?

My kit is designed to fit 356x22mm A8 rear rotors.... same dimensions as c7 RS7 rear rotors. I don't see any logical reason why it would not work,

Your calipers contact point is along the outside edge of the rotor. I'd be concerned that this plus the additional reduction of materials from the wave rotors would cause issues.

If this doesn't concern you everything should bolt up.

One way to find out ;)

------------

Also Vosh, are you aware of any other rotors that may work better?

Looking at the calipers and doing a quick google search the "Correct" rotors for these calipers are 28mm wide.

If anyone is feeling adventurous the C6 RS6 rear rotors are 356x28mm and might be a solution

The Macan Turbo also used 356x28mm rotors which should be more easily availible. Anyone want to do some research?

[voshmag]

Your calipers contact point is along the outside edge of the rotor. I'd be concerned that this plus the additional reduction of materials from the wave rotors would cause issues.

If this doesn't concern you everything should bolt up.

One way to find out ;)

------------

Also Vosh, are you aware of any other rotors that may work better?

Looking at the calipers and doing a quick google search the "Correct" rotors for these calipers are 28mm wide.

If anyone is feeling adventurous the C6 RS6 rear rotors are 356x28mm and might be a solution

The Macan Turbo also used 356x28mm rotors which should be more easily availible. Anyone want to do some research?Correct the touareg, Cayenne and Q7 have 28mm wide rear rotors. The b5 boys have been running these calipers on 22mm wide b6/7 rotors for years without issues. The pistons have enough travel to not jeopardize the seals by an addition 3mm extension. You see far mors extension during pad wear.

That said, I have several other rotor options on my bench however the only rotors that are direct fir (needs no remains/drilling ) are the A8. I did not bench test the s6 rotors due to cost. So if somebody has a junk s6 rear rotor laying around please send it my way.

I am currently on the haggle phaze with 3 rotor manufacturers to provide a 355x28mm rotor option for my kits. I actually have a sample heading my way however these will be a bit more pricey. The goal is to have my b8/8.5/c7 kit be compatible with 356/22 and 356/28 rotors. Figured the track stars would like a thicker rotor option.

In short story... Every penny of profit made is being dumped into rnd for new kits and revisions based on feedback from users.


Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

Side note. I am also working on M/C compatibilies across the Audi/VW/Porsche family amd will post my findings in a FAQ section on my site along with a comment section where users can share experience, feedback, knowlege, advice and killer install pics. It will take till at least the end of the month for me to finish this since af this point VoshMods is a hobby aI have a day job and family.

So for now if you have concers on if the oem M/C will provide pedal feel of your liking the best option is to install an rs5 m/c. (If anyone can prove this wrong please do so) B8 is plug and play... B8.5 you will need rs5 m/c and either b8 booster or rs5 booster.



Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[vvenom800tt]

Side note. I am also working on M/C compatibilies across the Audi/VW/Porsche family amd will post my findings in a FAQ section on my site along with a comment section where users can share experience, feedback, knowlege, advice and killer install pics. It will take till at least the end of the month for me to finish this since af this point VoshMods is a hobby aI have a day job and family.

So for now if you have concers on if the oem M/C will provide pedal feel of your liking the best option is to install an rs5 m/c. (If anyone can prove this wrong please do so) B8 is plug and play... B8.5 you will need rs5 m/c and either b8 booster or rs5 booster.



Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)But does the RS5 master bolt right up the B7 A4s?

Sent from my SM-G960U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

But does the RS5 master bolt right up the B7 A4s?

Sent from my SM-G960U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)Oh.... I dont support pesant A4 talk...

;)

I ordered an a4 master cilynder as well so I could play with it. But from my research I belive yes it will. Need till end of month though to put facts together.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[whiped]

I have S6 rotors on my car right now so can test fit once the brackets come.

I'm a little concerned about brake feel as I will have these in the rear and RS5 calipers in the front. Waiting for Oleg to get back to me on how his setup feels before buying more parts.

[voshmag]

I have S6 rotors on my car right now so can test fit once the brackets come.

I'm a little concerned about brake feel as I will have these in the rear and RS5 calipers in the front. Waiting for Oleg to get back to me on how his setup feels before buying more parts.Curious how Oleg is plumbing the OEM caliper. Wonder if is just plugging the hole in caliper or running a stand m/c for hydro hand brake!

Any chance you can measure the hat height on your S6 rotors?

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[Moose88x]

Will 330x22 fit? I run EBC Slotted in the front and when I search for rear A8 rotors and the EBC rear slotted are 330x22?


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

Will 330x22 fit? I run EBC Slotted in the front and when I search for rear A8 rotors and the EBC rear slotted are 330x22?


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)Search 2012 a8

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

Will 330x22 fit? I run EBC Slotted in the front and when I search for rear A8 rotors and the EBC rear slotted are 330x22?


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)330mm will not work, not enough clearance. I wanted to make b8s4 rotors work based on options of rotors but the upper control arm will grenade the tesla motor when running 330mm rotors.

Ask me how I know... Hahahaha

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[Moose88x]

330mm will not work, not enough clearance. I wanted to make b8s4 rotors work based on options of rotors but the upper control arm will grenade the tesla motor when running 330mm rotors.

Ask me how I know... Hahahaha

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

Okay I’ll keep looking. I have the whole EBC stock set I can always return for new front and rears. Is 356 the smallest diameter they can be?


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[Moose88x]

330mm will not work, not enough clearance. I wanted to make b8s4 rotors work based on options of rotors but the upper control arm will grenade the tesla motor when running 330mm rotors.

Ask me how I know... Hahahaha

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

Dude that sounds like a nice little expensive mishap! I may email Adams rotors and see what kind of custom setup I can do


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[ejuarez97]

Waiting on the fronts to come out so I can order and install in one go. Thanks for all the work you put in Vosh!

Sent from my LG-H931 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[A.C.]

Side note. I am also working on M/C compatibilies across the Audi/VW/Porsche family amd will post my findings in a FAQ section on my site along with a comment section where users can share experience, feedback, knowlege, advice and killer install pics. It will take till at least the end of the month for me to finish this since af this point VoshMods is a hobby aI have a day job and family.

So for now if you have concers on if the oem M/C will provide pedal feel of your liking the best option is to install an rs5 m/c. (If anyone can prove this wrong please do so) B8 is plug and play... B8.5 you will need rs5 m/c and either b8 booster or rs5 booster.



Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

I’m glad you posed this question concerning the m/c with the additional piston upgrade and possibly for the b9 fronts. I will definitely have to order the entire kit fronts, rears and m/c. Thanks for the R&D!


Sent from my iPhone using Tapatalk

[voshmag]

Dude that sounds like a nice little expensive mishap! I may email Adams rotors and see what kind of custom setup I can do


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)Give me a little time but I am working on some sweet rotor options for all my kits.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

Waiting on the fronts to come out so I can order and install in one go. Thanks for all the work you put in Vosh!

Sent from my LG-H931 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)You are welcome, this is very fun. I'm a self taught and have much to learn but I catch on an quickly and troubleshoot/problem solve pretty well.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

I’m glad you posed this question concerning the m/c with the additional piston upgrade and possibly for the b9 fronts. I will definitely have to order the entire kit fronts, rears and m/c. Thanks for the R&D!


Sent from my iPhone using TapatalkYeah... I might be a little redneck but I'm far from half a$$... Haha. My approach to this far off the beaten path. But I blame my grandfather for this. Instead of a book on how to fix it... Just Learn how it works then your imagination is the limit.

True story: was very young and having a hard time putting my new MSD distributor into my camaro so I called my grandpa. He pulls up with a spark plug socket... Takes out the plug in cylinder 1... Tells me to crank it the shut off quickly as he stuck his finger in the hole to feel when it was tdc. 4 cranks later he tightend the dostributor down and it came alive. He was a crazy bastard and rubbed off on me. I'm just a redneck with dreams....haha. Sorry for tmi.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[blackanese]

Give me a little time but I am working on some sweet rotor options for all my kits.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

Awesome. Not too many options in that 356x22. Can't wait for my rear kit to come in

[vvenom800tt]

Oh.... I dont support pesant A4 talk...

;)

I ordered an a4 master cilynder as well so I could play with it. But from my research I belive yes it will. Need till end of month though to put facts together.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)It would awesome if you could confirm the fitment.

Thank you sir!

Sent from my SM-G960U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

It would awesome if you could confirm the fitment.

Thank you sir!

Sent from my SM-G960U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)Need more time before reporting back my findings... I will say the archives of AZ and a few other sites have been very helpful.

I have noticed one interesting thing. The rs5 booster has a much stiffer spring. Was shocked at the difference

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[vvenom800tt]

Need more time before reporting back my findings... I will say the archives of AZ and a few other sites have been very helpful.

I have noticed one interesting thing. The rs5 booster has a much stiffer spring. Was shocked at the difference

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)Interesting find

Sent from my SM-G960U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[whiped]

I assume your googling ended you up here but if not here is the thread: https://www.audizine.com/forum/showthread.php/736928-Master-Cylinder-Upgrade-for-Big-Brake-Kits-Thread

It is also worth noting a similar rear BBK to yours was used years ago... Just been waiting for someone to commercialize a bracket.
I am curious what rotors he was able to use though...

http://i65.tinypic.com/2h37w5x.jpg

[voshmag]

I assume your googling ended you up here but if not here is the thread: https://www.audizine.com/forum/showthread.php/736928-Master-Cylinder-Upgrade-for-Big-Brake-Kits-Thread

It is also worth noting a similar rear BBK to yours was used years ago... Just been waiting for someone to commercialize a bracket.
I am curious what rotors he was able to use though...

http://i65.tinypic.com/2h37w5x.jpgThanks for the link and indeed I reviewed it. I think he has a lambog setup accross the board including rotor. One other setup similar I have seen on the webs...

Back to the m/c thread... "the caliper pistons are sized so that the overall size of the multi piston setup stays within the % of of the margin"

margin... What has been this margin been determined to be?

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

I assume your googling ended you up here but if not here is the thread: https://www.audizine.com/forum/showthread.php/736928-Master-Cylinder-Upgrade-for-Big-Brake-Kits-Thread

It is also worth noting a similar rear BBK to yours was used years ago... Just been waiting for someone to commercialize a bracket.
I am curious what rotors he was able to use though...

http://i65.tinypic.com/2h37w5x.jpgAdding clarification... What is deemed as the standard "acceptable" margin?

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[Symko]

Well 356 rear will clear mostn18 wheels... But what are your goals for front. That will dictate what wheels. Personally I like the b8 19's anyways... But that is just me.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

I had the same question about 18” wheel clearance. I need them for a winter setup. Not sure what your front setup will be yet but I could probably get by with 356 fronts. Not sure if it would look odd with 356 all around.

[voshmag]

I had the same question about 18” wheel clearance. I need them for a winter setup. Not sure what your front setup will be yet but I could probably get by with 356 fronts. Not sure if it would look odd with 356 all around.Hahahahahahahahaha
..

390mm girodiscs up front....bye bye 18's.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[Symko]

Hahahahahahahahaha
..

390mm girodiscs up front....bye bye 18's.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

Wow! Those will be huge. Thanks

[voshmag]

Wow! Those will be huge. ThanksHuge ans pure awesome! however my beta test car has 19' wheels at 40 offset, fronts 6 pistons clear with ease... Rears need 1mm spacer to clear. Pretty much any wheel with big brake friendly spokes et38 or better should be money.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[JettaGetUpandGo]

I never knew a B8/8.5 A5 Sportback existed. Europe gets all the fun stuff!

I have been looking at RS5 front calipers with the 380mm Girodisc rotors in the front and just S4 rears with the matching Girodisc rotors for the rear (or the JHM 19z fronts with their matching S4 rotors for the rear). I love the rear solution here. Plans are on hold until I see the fronts!

[hardfive]

I bought the hardware kit and have sourced my brembo and Tesla calipers. Pretty excited and glad you took the time to do this work.

Just my opinion, but if you have caliper options coming/planned, you might want to give some insight as I'm sure there are others like me that are looking to source those now.

[voshmag]

I bought the hardware kit and have sourced my brembo and Tesla calipers. Pretty excited and glad you took the time to do this work.

Just my opinion, but if you have caliper options coming/planned, you might want to give some insight as I'm sure there are others like me that are looking to source those now.Most likely my fronts will he a complete kit in a box. Just need to buy pads and send it!

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[Circuit]

Excited for my bracket kit! What's ETA on those?

[tylern012]

Excited for my bracket kit! What's ETA on those?

He said roughly a month on 2/23, im waiting another two days before I start harassing him about a full kit [emoji51]


Sent from my iPhone using Tapatalk

[voshmag]

He said roughly a month on 2/23, im waiting another two days before I start harassing him about a full kit [emoji51]


Sent from my iPhone using TapatalkAll kits but one are made and at zinc plating now. Bracket kits should be shipping next weekend. Big Baller (with calipers) I'm a litle behind on.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[tylern012]

All kits but one are made and at zinc plating now. Bracket kits should be shipping next weekend. Big Baller (with calipers) I'm a litle behind on.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

I’m holding on for hopefully a front and rear combo kit. I have not ordered anything yet.


Sent from my iPhone using Tapatalk

[voshmag]

I’m holding on for hopefully a front and rear combo kit. I have not ordered anything yet.


Sent from my iPhone using Tapatalk^ This is a smart man... Im mega excited about my fronts... Even more when paired together. Numbers look super solid.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[tylern012]

^ This is a smart man... Im mega excited about my fronts... Even more when paired together. Numbers look super solid.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

Hence why I said I’ll start harassing you in two days about the full bbk kits! Thankfully my car has been in storage for a freaking month because I have been working so I still don’t need breaks yet.


Sent from my iPhone using Tapatalk

[Chunchoy14]

Some diy powdercoating. Cant wait for the bracket kit/harness/hardware to come in [emoji1]https://uploads.tapatalk-cdn.com/20190323/d0b59e1ce79ae90c68db0460589197c5.jpghttps://uploads.tapatalk-cdn.com/20190323/f16fe72985fccb4dccc913ac8e8b9cf6.jpghttps://uploads.tapatalk-cdn.com/20190323/2858490ae6e70349ccf2ce5b5750d155.jpg

Sent from my LM-V350 using Tapatalk

[voshmag]

Some diy powdercoating. Cant wait for the bracket kit/harness/hardware to come in [emoji1]https://uploads.tapatalk-cdn.com/20190323/d0b59e1ce79ae90c68db0460589197c5.jpghttps://uploads.tapatalk-cdn.com/20190323/f16fe72985fccb4dccc913ac8e8b9cf6.jpghttps://uploads.tapatalk-cdn.com/20190323/2858490ae6e70349ccf2ce5b5750d155.jpg

Sent from my LM-V350 using TapatalkHot dam that looks great. Adapter bracket kits place last week and earlier should ship next weekend! Big baller 2 weeks..ish. Lots of harnesses to make still.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[Circuit]

All kits but one are made and at zinc plating now. Bracket kits should be shipping next weekend. Big Baller (with calipers) I'm a litle behind on.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

Woot!

[voshmag]

Hot dam that looks great. Adapter bracket kits place last week and earlier should ship next weekend! Big baller 2 weeks..ish. Lots of harnesses to make still.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)Gunning for Monday shipping on most b8 adpater kits... Oh and install instructions are ready for download.

https://www.instagram.com/p/BvlUMr5JJpO/?utm_source=ig_share_sheet&igshid=8domvfce7egh

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[Blackb8.5]

Bit the bullet and ordered a kit.

[Moose88x]

Will 19x9.5 et40 clear or is a spacer needed?


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

Bit the bullet and ordered a kit.The wheels pictured are Nuspeed et 19" et42 I think. Needed 2mm spacer to clear. OEM wheels were ET47 and needed 5mm spacer. Should clear but boils down to spoke design. I would grind/sand a little off brembo before I added a 2-3mm spacer. There is plenty of material thickness to do this safely.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[Moose88x]

The wheels pictured are Nuspeed et 19" et42 I think. Needed 2mm spacer to clear. OEM wheels were ET47 and needed 5mm spacer. Should clear but boils down to spoke design. I would grind/sand a little off brembo before I added a 2-3mm spacer. There is plenty of material thickness to do this safely.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

Okay cool! They’re Avant Garde M590’s. Excited for these to ship out! Ordered Macan Fronts and going to color match when I get them!


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

Okay cool! They’re Avant Garde M590’s. Excited for these to ship out! Ordered Macan Fronts and going to color match when I get them!


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)I will let you know... If you dont like your pedal its because of the Macan's... Not my rear kit. Just saying. Haha. But seriously.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[Moose88x]

I will let you know... If you dont like your pedal its because of the Macan's... Not my rear kit. Just saying. Haha. But seriously.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

Damn that’s upsetting to hear 🤦🏼*♂️. I was just liking the feel after upgrading my stock stuff to SS lines. Brake booster issue or what?


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

Damn that’s upsetting to hear 🤦🏼*♂️. I was just liking the feel after upgrading my stock stuff to SS lines. Brake booster issue or what?


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)Oh, I'm not saying you wont be good.. Haha. Saying that if you are not then focus on pads, lines and front calipers. Have not disclosed this yet but my rear kit reduces volume needed in rear by about 1.8%. Meaning it should not alter the pedal in any way (unless you buy crappy pads of brask in wrong)

If you have an exhisting front big brake kit and like your pedal... Adding my rear kit has such a Very small chance of negatively altering pedal feel.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[Blackb8.5]

Oh, I'm not saying you wont be good.. Haha. Saying that if you are not then focus on pads, lines and front calipers. Have not disclosed this yet but my rear kit reduces volume needed in rear by about 1.8%. Meaning it should not alter the pedal in any way (unless you buy crappy pads of brask in wrong)

If you have an exhisting front big brake kit and like your pedal... Adding my rear kit has such a small chance of negatively altering pedal feel.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

That's great to hear since I'll be running 20Z Brembos up front lol

[hardfive]

Damn that’s upsetting to hear 🤦🏼*♂️. I was just liking the feel after upgrading my stock stuff to SS lines. Brake booster issue or what?


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

Don't let air (any more then you have to) into the brake lines when swapping on any of the calipers. The mushy pedal reports after installing the Macan calipers is due to air in the lines/ABS system which is hard to bleed out. Using a ross tech you can do the ABS test which will force the air out.

[hardfive]

From the install instructions
Step 12: install new VoshMods 356x26mm GiroDisc Rotor...

[voshmag]

Don't let air (any more then you have to) into the brake lines when swapping on any of the calipers. The mushy pedal reports after installing the Macan calipers is due to air in the lines/ABS system which is hard to bleed out. Using a ross tech you can do the ABS test which will force the air out.Any tips for replacing front calipers and lines without having to cycle abs pump? Thought cycling abs was pretty much a have to when doing fronts?

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

From the install instructions
Step 12: install new VoshMods 356x26mm GiroDisc Rotor...Oh.... Yeah. Coming end of April.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[hardfive]

Oh.... Yeah. Coming end of April.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

As a stand alone item or just with a full kit?

[voshmag]

As a stand alone item or just with a full kit?Both.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[hardfive]

Both.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

Ok. Got my bracket kit this morning. The only thing I need to buy is my rear rotors...

[voshmag]

Ok. Got my bracket kit this morning. The only thing I need to buy is my rear rotors...Can you do me a favor. The install is pretty straight forward however if you see any callouts or revisions needed with install guide please let me know.... Or if you have any questions!

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[ModItNow]

Ok. Got my bracket kit this morning. The only thing I need to buy is my rear rotors...Where are people sourcing them from?

Sent from my SM-G965U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

Where are people sourcing them from?

Sent from my SM-G965U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)Just an update for those Still needing rotors. A budget rotor that has been run on 2 cars with grear success is R1 rotors (2013 A8 rear) in combination of EBC REDS. (I actually took off hawks from my beta car because I was not happy with bite) ebc have given great results so far.

As for 2 piece rotors, I am working with girodisc to bring 356×26mm (little thicker for you track hungry guys). I am awaiting my beta rotors to test with before giving giro the green light to make the production run. I expect these to be up on my site by the end of April. Giro are not cheap but you get what you pay for. My front kit will also use 390mm giros.

Last, for those of you worried about pedal and my rear kit. I actually decrease needed volume by 1.8% in comparison to the OEM caliper. Its a bold statement and I wanted to give it 2 months of road testing to validate this. Boom

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[hardfive]

Where are people sourcing them from?

Sent from my SM-G965U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

I was looking at these but interested in the Girodisk ones Voshmag mentioned in his reply to you. https://www.achtuning.com/audi/a-series/a8/d4-a8-2011-2018/?_bc_fsnf=1&Brakes=brake+rotors+-+rear

I'll also gonna look at cheap blanks like the R1 ones listed as I may see if I can find a local company to pattern match my fronts.

[Chunchoy14]

Yeee got my brackets in. High quality stuff. Cant wait to put them in. Just waiting on the padshttps://uploads.tapatalk-cdn.com/20190404/b257f2f4e4c6313cc62b4ec2fd274d3d.jpghttps://uploads.tapatalk-cdn.com/20190404/49e771e459cb59bd945a3372ee0c0bcb.jpg

Sent from my LM-V350 using Tapatalk

[voshmag]

Yeee got my brackets in. High quality stuff. Cant wait to put them in. Just waiting on the padshttps://uploads.tapatalk-cdn.com/20190404/b257f2f4e4c6313cc62b4ec2fd274d3d.jpghttps://uploads.tapatalk-cdn.com/20190404/49e771e459cb59bd945a3372ee0c0bcb.jpg

Sent from my LM-V350 using TapatalkGlad you approve. High horsepower/salt belt ready! What pads you going with? Did you see my comments about the bird pads. I have used them on many other platforms... Was not a fan for this application.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[ModItNow]

Just an update for those Still needing rotors. A budget rotor that has been run on 2 cars with grear success is R1 rotors (2013 A8 rear) in combination of EBC REDS. (I actually took off hawks from my beta car because I was not happy with bite) ebc have given great results so far.

As for 2 piece rotors, I am working with girodisc to bring 356×26mm (little thicker for you track hungry guys). I am awaiting my beta rotors to test with before giving giro the green light to make the production run. I expect these to be up on my site by the end of April. Giro are not cheap but you get what you pay for. My front kit will also use 390mm giros.

Last, for those of you worried about pedal and my rear kit. I actually decrease needed volume by 1.8% in comparison to the OEM caliper. Its a bold statement and I wanted to give it 2 months of road testing to validate this. Boom

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)Thanks for the info!

Sent from my SM-G965U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

Anyone install over the weekend?????

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[waxxonMTL]

Just an update for those Still needing rotors. A budget rotor that has been run on 2 cars with grear success is R1 rotors (2013 A8 rear) in combination of EBC REDS. (I actually took off hawks from my beta car because I was not happy with bite) ebc have given great results so far.

As for 2 piece rotors, I am working with girodisc to bring 356×26mm (little thicker for you track hungry guys). I am awaiting my beta rotors to test with before giving giro the green light to make the production run. I expect these to be up on my site by the end of April. Giro are not cheap but you get what you pay for. My front kit will also use 390mm giros.

Last, for those of you worried about pedal and my rear kit. I actually decrease needed volume by 1.8% in comparison to the OEM caliper. Its a bold statement and I wanted to give it 2 months of road testing to validate this. Boom

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

I run giro both front and rear, they work perfectly even at minus 20 celcius ( canada winter), looks great too and great weight saving. Would buy again giros anytime I can.

[hardfive]

Anyone install over the weekend?????

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

Im weeks out as I need to have my calipers refinished and still undecided on rotors.

Above you mentioned you reduced rear brake volume by 1.8% - how? I only ask as a bracket only purchaser I'm wondering if mine will feel different? Im confident I can bleed them properly just interested in the revision.

[voshmag]

Im weeks out as I need to have my calipers refinished and still undecided on rotors.

Above you mentioned you reduced rear brake volume by 1.8% - how? I only ask as a bracket only purchaser I'm wondering if mine will feel different? Im confident I can bleed them properly just interested in the revision.Sorry for confusion. No revision on b8 rear kit. Yours Will be same specs.... Approximately a 1.8% reduction in needed volume in comparison to OEM rear floating caliper.

As for rotors. I am on pace to have 356x26mm giros out first week of May.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[Moose88x]

Any update when the Big Baller Kits ship out?


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

Any update when the Big Baller Kits ship out?


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)Yours should Ship by next Wed! I only have a few more still ahead of yours.. Going as fast as possible! 115814115815115816

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[Moose88x]

Yours should Ship by next Wed! I only have a few more still ahead of yours.. Going as fast as possible! 115814115815115816

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

Dude those look awesome I am STOKED!!


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[Chunchoy14]

Got em on! It was very straight forward no hiccups. Instructions were spot on. Only word of caution fitment on wheels is limited. It fit my 19x8.5 konig ampliform +32 after a 3mm spacer. Very tight fit.

Should pair up nicely with the b9 s4 frontshttps://uploads.tapatalk-cdn.com/20190416/e1db53bcd7f29c27a25260faf63f25a0.jpghttps://uploads.tapatalk-cdn.com/20190416/f49c205d6215eec3e0b41d82f5de14e7.jpghttps://uploads.tapatalk-cdn.com/20190416/72daac3f822240c9597b9dbd57f42d0f.jpghttps://uploads.tapatalk-cdn.com/20190416/812db8e2e92430a5f23dab11222de771.jpghttps://uploads.tapatalk-cdn.com/20190416/0753f11580364514d59c1649ff51f0c7.jpghttps://uploads.tapatalk-cdn.com/20190416/06fd20a6a3d8026933f0d25b35eabacf.jpg

Sent from my LM-V350 using Tapatalk

[hellovaras]

Got em on! It was very straight forward no hiccups. Instructions were spot on. Only word of caution fitment on wheels is limited. It fit my 19x8.5 konig ampliform +32 after a 3mm spacer. Very tight fit.

Should pair up nicely with the b9 s4 frontshttps://uploads.tapatalk-cdn.com/20190416/e1db53bcd7f29c27a25260faf63f25a0.jpghttps://uploads.tapatalk-cdn.com/20190416/f49c205d6215eec3e0b41d82f5de14e7.jpghttps://uploads.tapatalk-cdn.com/20190416/72daac3f822240c9597b9dbd57f42d0f.jpghttps://uploads.tapatalk-cdn.com/20190416/812db8e2e92430a5f23dab11222de771.jpghttps://uploads.tapatalk-cdn.com/20190416/0753f11580364514d59c1649ff51f0c7.jpghttps://uploads.tapatalk-cdn.com/20190416/06fd20a6a3d8026933f0d25b35eabacf.jpg

Sent from my LM-V350 using TapatalkNice work.

I have 19 x 9.5 on 39 et, no spacers. Do you think they will fit.

Sent from my Pixel 2 XL using Tapatalk

[voshmag]

Nice work.

I have 19 x 9.5 on 39 et, no spacers. Do you think they will fit.

Sent from my Pixel 2 XL using TapatalkAmazing! On the wheel fitment. If you have wheels that might be questionable... You can gain 3-4 mm by grinding the brembos. On the brembo there are 4 guide pins for the pads. They are held in by a roll (spring) pin that is punched in under the bleeders or crossover tube. Use those roll pins as a benchmark. I have ground 3 mm away from them without issues.... Grind at your own risk of course. :)

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[Chunchoy14]

Nice work.

I have 19 x 9.5 on 39 et, no spacers. Do you think they will fit.

Sent from my Pixel 2 XL using TapatalkDepends on wheel design. Lip? Spoke design? Which rim do you have?

Sent from my LM-V350 using Tapatalk

[hellovaras]

Depends on wheel design. Lip? Spoke design? Which rim do you have?

Sent from my LM-V350 using TapatalkTSW Watkins. Thanks

Sent from my Pixel 2 XL using Tapatalk

[Chunchoy14]

TSW Watkins. Thanks

Sent from my Pixel 2 XL using TapatalkYou may be ok. Refer to these pics to compare to your wheelhttps://uploads.tapatalk-cdn.com/20190417/320fd31df138e6ca4bf4a1878769ccf9.jpghttps://uploads.tapatalk-cdn.com/20190417/61907688e29c6cd1cd616d1ea2a75935.jpg

Sent from my LM-V350 using Tapatalk

[ReDeViL]

Give me a little time but I am working on some sweet rotor options for all my kits.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

any updates on this?
holding out on a full kit before i make the order.

[voshmag]

any updates on this?
holding out on a full kit before i make the order.Early to mid May.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[ReDeViL]

Kit is designed for 356mm A8 rear rotor

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

another qns.
can you confirm which year A8 this is for? '04 -'08?
sourcing for pads.

[voshmag]

another qns.
can you confirm which year A8 this is for? '04 -'08?
sourcing for pads.2012 D4 A8 356x22m

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

I am deff picking up a set. Whats your thoughts on the red baron matching the Audi B9 red calipers?Chaos... Check your Messages.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[hardfive]

Got em on! It was very straight forward no hiccups. Instructions were spot on. Only word of caution fitment on wheels is limited. It fit my 19x8.5 konig ampliform +32 after a 3mm spacer. Very tight fit.

Should pair up nicely with the b9 s4 frontshttps://uploads.tapatalk-cdn.com/20190416/e1db53bcd7f29c27a25260faf63f25a0.jpghttps://uploads.tapatalk-cdn.com/20190416/f49c205d6215eec3e0b41d82f5de14e7.jpghttps://uploads.tapatalk-cdn.com/20190416/72daac3f822240c9597b9dbd57f42d0f.jpghttps://uploads.tapatalk-cdn.com/20190416/812db8e2e92430a5f23dab11222de771.jpghttps://uploads.tapatalk-cdn.com/20190416/0753f11580364514d59c1649ff51f0c7.jpghttps://uploads.tapatalk-cdn.com/20190416/06fd20a6a3d8026933f0d25b35eabacf.jpg

Sent from my LM-V350 using Tapatalk

Just to be clear, you say +32 after a 3mm spacer - so your wheels are factory +32 and the 3mm spacer brought you to essentially +29 which just barely fit is that right?

Just trying to figure out general spacer needed as my wheels are 19x8.5 et 43

edit -I get spacers dont change offset but hopefully the question makes sense

[Chunchoy14]

The wheels are actual +32 offset. Offset plays a role, but really spoke design/placement matters a lot more. I had 20x8.5 38mm offset, 20x10 40mm offset that didnt fit. But my stock rotors 19x8.5 +43 fit. What rims do you have?

Sent from my LM-V350 using Tapatalk

[hardfive]

OEM 2011 sline rs4 wheels

These are them https://www.audizine.com/forum/showthread.php/820894-Audi-RS4-s-line-OEM-19%E2%80%9D-rims?highlight=2011+line

[Chunchoy14]

Link doesnt work. Do you have a stock peeler/rotor wheel to compare with? If its similar to the stock wheels youll be ok.

Look at it from the backside. Curvature from hub and spoke to rim


Sent from my LM-V350 using Tapatalk

[hardfive]

IDK Link works for me. How about this one? https://www.hubcaphaven.com/p/9291/aly58866-audi-a4-wheel-hyper-silver-8k0601025aa.html

They have good clearance for my front macan calipers so hopefully they will work.

Unfortunately no other wheels to try. Just sold some s5 peelers but they had a different offset.

https://i.imgur.com/ph3OUHj.jpg

[Chunchoy14]

Hard to say without looking at the backside.
Compare yourwheels to this, if its similar in depth you should be good to go.https://uploads.tapatalk-cdn.com/20190424/634ca83957cd2230db398262a729770d.jpghttps://uploads.tapatalk-cdn.com/20190424/6dc601d2f15c923c4a29cdff0b25ef32.jpg

Sent from my LM-V350 using Tapatalk

[hardfive]

Yeah I'll check but if its down to mm might be no way to know until I put them on.

Maybe an odd question but is the distance between you front brake rotor and wheel the same as your rear brake rotor and wheel? If they are similar that might be a good indicator as I do have about an inch on my front rotors.

Thanks for the responses though, appreciate it.

[Chunchoy14]

Yeah I'll check but if its down to mm might be no way to know until I put them on.

Maybe an odd question but is the distance between you front brake rotor and wheel the same as your rear brake rotor and wheel? If they are similar that might be a good indicator as I do have about an inch on my front rotors.

Thanks for the responses though, appreciate it.Your pic loaded now thats weird.
I did side by side comparison looks good to me.
https://uploads.tapatalk-cdn.com/20190425/d16c1b88735362a9b4d1a1e28cf25daa.jpg

Sent from my LM-V350 using Tapatalk

[voshmag]

Yeah I'll check but if its down to mm might be no way to know until I put them on.

Maybe an odd question but is the distance between you front brake rotor and wheel the same as your rear brake rotor and wheel? If they are similar that might be a good indicator as I do have about an inch on my front rotors.

Thanks for the responses though, appreciate it.This May help with wheel clearances. Vs forged vs02 et32 required 2mm spacer118988

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

Yeah I'll check but if its down to mm might be no way to know until I put them on.

Maybe an odd question but is the distance between you front brake rotor and wheel the same as your rear brake rotor and wheel? If they are similar that might be a good indicator as I do have about an inch on my front rotors.

Thanks for the responses though, appreciate it.Another one. Vossen vsw-3 20x10.5 et30


No spacer needed, reported to be close but cleared by about a centimeter. 118989118990118991

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[hellovaras]

Another one. Vossen vsw-3 20x10.5 et30


No spacer needed, reported to be close but cleared by about a centimeter. 118989118990118991

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)That is cutting it close

Sent from my Pixel 2 XL using Tapatalk

[hellovaras]

This May help with wheel clearances. Vs forged vs02 et32 required 2mm spacer118988

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)I am running 19 x 9.5 39et in the summer and stock peelers in the winter. I don't think these will clear my summer wheels [emoji53]

Sent from my Pixel 2 XL using Tapatalk

[voshmag]

I am running 19 x 9.5 39et in the summer and stock peelers in the winter. I don't think these will clear my summer wheels [emoji53]

Sent from my Pixel 2 XL using Tapatalk I recommend removing a wheel and test fitting brembo 4 pot on the b8s4 rotor. Its technically the same as the D4 a8 rotor except 330 instead of 356.

This will let you check wheel fitment prior to painting/powdering calipers so you can grind if needed. Basic reports are that wheels with high concave cut it close and may need spacer. Wheels that are bbk friendly clear issue free.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

Im weeks out as I need to have my calipers refinished and still undecided on rotors.

Above you mentioned you reduced rear brake volume by 1.8% - how? I only ask as a bracket only purchaser I'm wondering if mine will feel different? Im confident I can bleed them properly just interested in the revision.I never responded on the reduction of needed volume in comparison to OEM caliper and how. A fixed caliper with more pistons has more actual piston surface area compared to a floating style caliper with 1 single large piston like the OEM caliper. But its not an apples to apples comparison. A floating caliper is far less efficient than a fixed multi-piston caliper.

Keeping it simple, a floating caliper must push against rotor then push back so you double the piston area when comparing against a fixed caliper (this does factor in resistance from the floating caliper slides and is not 100 percent accurate). Its pretty close though.

The OEM rear pistin is a monster.

Oh... New rotors almost ready, test fit without the Tesla was pure money, 100 percent on point with full pad contact and no dead spots.119045

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[JettaGetUpandGo]

The new rotors look amazing! I love that the ring is better matched to the pad than the A8 rotors. Not that unswept area in the rotors actually affect anything.

Can't wait to see the front kits, then it's probably time to pull the trigger. Looking back I didn't see it, but is there a teaser for what caliper is being used for the fronts?

[voshmag]

The new rotors look amazing! I love that the ring is better matched to the pad than the A8 rotors. Not that unswept area in the rotors actually affect anything.

Can't wait to see the front kits, then it's probably time to pull the trigger. Looking back I didn't see it, but is there a teaser for what caliper is being used for the fronts?Caliper uses Hellcat pads.... [emoji12]

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[JettaGetUpandGo]

Caliper uses Hellcat pads.... [emoji12]

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)Must be a small caliper. ;)

[chaos2984]

What rotors are people running for the rear. What you guys think about the Meyle's?
What pads are people buying as well?

[Moose88x]

I went with yellow stuff front and rear with my Macan fronts


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[p3u]

I never responded on the reduction of needed volume in comparison to OEM caliper and how. A fixed caliper with more pistons has more actual piston surface area compared to a floating style caliper with 1 single large piston like the OEM caliper. But its not an apples to apples comparison. A floating caliper is far less efficient than a fixed multi-piston caliper.

Keeping it simple, a floating caliper must push against rotor then push back so you double the piston area when comparing against a fixed caliper (this does factor in resistance from the floating caliper slides and is not 100 percent accurate). Its pretty close though.

The OEM rear pistin is a monster.

Oh... New rotors almost ready, test fit without the Tesla was pure money, 100 percent on point with full pad contact and no dead spots.119045

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

To be clear, your kit will work with 330mm or 356mm rear rotors?

Thanks

[voshmag]

To be clear, your kit will work with 330mm or 356mm rear rotors?

ThanksB8/8.5/C7 kits fit Audi D4 A8 356x22mm rotors or My 356x26mm rotors119090

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[p3u]

B8/8.5/C7 kits fit Audi D4 A8 356x22mm rotors or My 356x26mm rotors119090

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

Can you go into more detail on the 356mm girodisc? I didnt think they made such a size.

[voshmag]

Can you go into more detail on the 356mm girodisc? I didnt think they made such a size.They do when you place an order for 20 pair total and give them exact specs on what you want. They are custom built for me.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

Can you go into more detail on the 356mm girodisc? I didnt think they made such a size.I have not put a single penny from this into my pocket since I started with my b5 kit. Have not done a single group buy...All profits go to improving my exhisting kits and bring new kits to market for the community. All rnd and beta kits are paid for by me....I will make money one day but that is not my focus right now, my day job keeps me afloat.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[ReDeViL]

when will the rear package with rotors be available on the site?
will purchase when ready.

and does the kit come with rear pads?
or do i have a choice to purchase a specific brand myself?
whats the delivery lead time upon order?

[voshmag]

when will the rear package with rotors be available on the site?
will purchase when ready.

and does the kit come with rear pads?
or do i have a choice to purchase a specific brand myself?
whats the delivery lead time upon order?Rear kit with rotors will be up for sale in about a week, fronts about 3 weeks. Powder coaters had a catastrophic failure on their industrial compressor. Took 6 days to get replacement wired in and up and running and they got backed up quickly.

They have 22 sets of of my calipers right now... I am delaying any releases or sales until I get them bacl, in the mail and close to caught up. Learning from WDR, lol.... Never want to be in a hole I cant dig out of quickly.

As for front and rear kits. They will be complete minus pads. We all have our needs/driving style. Some value low dust others want aggresive street pad and the speed demons want pads you have to heat up in the microwave for before they feel right. Pad selection will be on the driver.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[adkmooserider]

What kind of maintenance requirements are there with the selected calipers? I live in snow/salt/sand country and have never had to rebuild an oem caliper. Would this be expected to be similar?

[JettaGetUpandGo]

What kind of maintenance requirements are there with the selected calipers? I live in snow/salt/sand country and have never had to rebuild an oem caliper. Would this be expected to be similar?

The main caliper at the rear is OEM from a Touareg/Q7/Cayenne and the small parking brake caliper is OEM from a Tesla. I wouldn't expect issues with either.

[voshmag]

What kind of maintenance requirements are there with the selected calipers? I live in snow/salt/sand country and have never had to rebuild an oem caliper. Would this be expected to be similar?The biggest forgotten thing with Touareg/q7/cayenne/rs4/r8 calipers is a regular cleaning of the pad guides.

There are 5 per caliper:
Bolt up top that keep pads from falling off
4 stainless guide pins/rods

When I rebuild calipers I remove and polish them for 2 reasons.

1 it looks awesome
2 they serve a function. They keep pads cetered as pistons go in and out. Brake dust will build up on the guide pins and cause resistance, friction and in worst case pad binding. I hit mine every few months with brake cleaner. Dont spray whole powder coated caliper, instead use the tube that comes with the brake cleaner and only clean the rods then give a rinse with water.


Thats the only maintenance required but this should be done on the donor car as well.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[p3u]

The biggest forgotten thing with Touareg/q7/cayenne/rs4/r8 calipers is a regular cleaning of the pad guides.

There are 5 per caliper:
Bolt up top that keep pads from falling off
4 stainless guide pins/rods

When I rebuild calipers I remove and polish them for 2 reasons.

1 it looks awesome
2 they serve a function. They keep pads cetered as pistons go in and out. Brake dust will build up on the guide pins and cause resistance, friction and in worst case pad binding. I hit mine every few months with brake cleaner. Dont spray whole powder coated caliper, instead use the tube that comes with the brake cleaner and only clean the rods then give a rinse with water.


Thats the only maintenance required but this should be done on the donor car as well.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

Does girodisc offer their magic pads for the rear caliper setup you offer?

[voshmag]

Does girodisc offer their magic pads for the rear caliper setup you offer?I will be selling giro pads for all my kits as well.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[chaos2984]

what you coming out with for the Front B8 kit?

[voshmag]

what you coming out with for the Front B8 kit?Release any day now.... These beast enough for you ???119155

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[p3u]

I will be selling giro pads for all my kits as well.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

Any special intro pricing on the rear setup with the 356 girodisc?

[voshmag]

Any special intro pricing on the rear setup with the 356 girodisc?Of course...... Haha. I do intro sales so I can quickly recover from costs if RND and beta kits that went out so I can fund the next design. Win win for everyone.

That said, girodisc are awesome... And expensive so these kits only have so much wiggle room for sales.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[p3u]

Of course...... Haha. I do intro sales so I can quickly recover from costs if RND and beta kits that went out so I can fund the next design. Win win for everyone.

That said, girodisc are awesome... And expensive so these kits only have so much wiggle room for sales.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

Just DM'd you on Facebook

[chaos2984]

Release any day now.... These beast enough for you ???119155

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)


Holly cow are these the Track Hawk Rotors lol

[hardfive]

Of course...... Haha. I do intro sales so I can quickly recover from costs if RND and beta kits that went out so I can fund the next design. Win win for everyone.

That said, girodisc are awesome... And expensive so these kits only have so much wiggle room for sales.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

Are the intro prices for full kit only or are you gonna sell some separately? Been holding off my rear rotor purchase to see how these gerodiscs turned out.

[voshmag]

Are the intro prices for full kit only or are you gonna sell some separately? Been holding off my rear rotor purchase to see how these gerodiscs turned out.Girodiscs will be availible by themselves indeed.

I have had a lot of dm's asking for weights so hete you go.

Fronts monstrous 390x34mm only weigh in at 25.2 pounds

Rear 356x26mm (4mm thicker than oem D4 A8 rotors) weigh in at 15.4 pounds
119234

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[Silver_Bullet]

Girodiscs will be availible by themselves indeed.

I have had a lot of dm's asking for weights so hete you go.

Fronts monstrous 390x34mm only weigh in at 25.2 pounds

Rear 356x26mm (4mm thicker than oem D4 A8 rotors) weigh in at 15.4 pounds

This is Car Porn, no other way to describe it.


Caliper uses Hellcat pads....

Did you just tease 6 piston Hellcat Brembos?

[JettaGetUpandGo]

The Hellcat calipers seem a little sacreligious, but go big or go home, right?

[voshmag]

The Hellcat calipers seem a little sacreligious, but go big or go home, right?Nah.... Hellcat Brembo pistons are oversized for this application and silly expensive.

Fun fact... Hellcat Brembos and CTS-V brembos share the same pad and are very similar to each other much like brembo 17z/18z are similar.

Plot gets even deeper, CTS-V and brembo 18z share DNA. Look at the CTS-V gen 2 caliper as a modern version of the 18z. They are so related its not even funny.

Pros for CTS-V calipers:
Price point vs performance
Slimmer than 18z
Stainless steel pistons
Better pad guides (2 pins vs the center pin and 2 lower guide pins)
Better heat dissipation with the outer shaper on each piston
Availible new... All day every day.

Paired with a $1400 monstrous 390mmx34mm girodisc this kit will be priced around 2650-2700.

There is zero chance of getting this performance and quality of a kit anywhere else period. It May not be cheap but I stand true to my mission of bringing enthusiast prices to the community.

Here is a teaser picture

119651119652119653

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[JettaGetUpandGo]

That's a great looking caliper!

[vvenom800tt]

Nah.... Hellcat Brembo pistons are oversized for this application and silly expensive.

Fun fact... Hellcat Brembos and CTS-V brembos share the same pad and are very similar to each other much like brembo 17z/18z are similar.

Plot gets even deeper, CTS-V and brembo 18z share DNA. Look at the CTS-V gen 2 caliper as a modern version of the 18z. They are so related its not even funny.

Pros for CTS-V calipers:
Price point vs performance
Slimmer than 18z
Stainless steel pistons
Better pad guides (2 pins vs the center pin and 2 lower guide pins)
Better heat dissipation with the outer shaper on each piston
Availible new... All day every day.

Paired with a $1400 monstrous 390mmx34mm girodisc this kit will be priced around 2650-2700.

There is zero chance of getting this performance and quality of a kit anywhere else period. It May not be cheap but I stand true to my mission of bringing enthusiast prices to the community.

Here is a teaser picture

119651119652119653

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)Does the CTS-V caliper bolt.ip exactly the same as a 18z?

Same ear spacing and offset (centered on rotor the same)?

Im running 17z but want to go to 18z eventually. But if the CTS-V is better all around caliper.

Might be a better option as long as it bolts up the same.

I have a B7 A4.

Sent from my SM-G960U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

Does the CTS-V caliper bolt.ip exactly the same as a 18z?

Same ear spacing and offset (centered on rotor the same)?

Im running 17z but want to go to 18z eventually. But if the CTS-V is better all around caliper.

Might be a better option as long as it bolts up the same.

I have a B7 A4.

Sent from my SM-G960U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)With My adapter bracket kit... Yes you could run b7/6/5.

Without my kit, no

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[chaos2984]

Looks awesome. Will there be any OEM style rotor available for the front that is not the giro disc? like you can buy the D4 A8 for the rear rotor. Don't want to blow all the money all at once.

[voshmag]

Looks awesome. Will there be any OEM style rotor available for the front that is not the giro disc? like you can buy the D4 A8 for the rear rotor. Don't want to blow all the money all at once.I was torn on that. I really wanted an oem rotor to bolt up to my kit. Boiled down to 7.5mm of pad overhanging on top. You could easily shave the pad down and I did just that for initial tests.

But at the end of the day OEM rotors are expensive so decided to go big or go home and dedicate my kit to run on the beastly 390x34mm girodisc that I designed.



Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[vvenom800tt]

With My adapter bracket kit... Yes you could run b7/6/5.

Without my kit, no

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)When will the brackets be available? Maybe 19s HAVE to be in my future 😊

Sent from my SM-G960U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

When will the brackets be available? Maybe 19s HAVE to be in my future [emoji4]

Sent from my SM-G960U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)I am stalling and giving powder coating time to catch up before opening the fload gates. Still have several kits in the hole right now. Gunning for 2-3 week release.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[vvenom800tt]

I am stalling and giving powder coating time to catch up before opening the fload gates. Still have several kits in the hole right now. Gunning for 2-3 week release.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)What will the rotor options be for us B7 folks? Oem rotors or custom 2 piece?

Sent from my SM-G960U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

What will the rotor options be for us B7 folks? Oem rotors or custom 2 piece?

Sent from my SM-G960U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)Not 100 percent there yet. My b8 kit will bolt up to b7/6/5. I do have a smaller rotor kit for b7/6 on back burner due to the fact that 18z is still a solid option for those models. Focused on 8v and b9 for now

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[vvenom800tt]

Not 100 percent there yet. My b8 kit will bolt up to b7/6/5. I do have a smaller rotor kit for b7/6 on back burner due to the fact that 18z is still a solid option for those models. Focused on 8v and b9 for now

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)Sounds good. Ill keep an eye on this post for updates.

Sent from my SM-G960U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[Gkit19986]

Hey op, do you have any front BBK in production yet? I have Alcon BBK that is giving me hell and its bad enough that I’ll never recommend their products to anyone period. My rings are 390 so I guess i just need the calipers and adapters, pads. Lmk please!!

[voshmag]

Hey op, do you have any front BBK in production yet? I have Alcon BBK that is giving me hell and its bad enough that I’ll never recommend their products to anyone period. My rings are 390 so I guess i just need the calipers and adapters, pads. Lmk please!!Front kits will go on sale by next weekend and will start shipping in 4 weeks.

As for your rotors being compatible... Its possible. Need some specs from you for me to determine if they will be good to send. Do you know the height (offset) of your rotors? Unfortunately you will need to remove them to measure. Lay rotor on flat surface with part wheel touches facing up. Then measure distance from where wheel rests to the ground.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

Front kits will go on sale by next weekend and will start shipping in 4 weeks.

As for your rotors being compatible... Its possible. Need some specs from you for me to determine if they will be good to send. Do you know the height (offset) of your rotors? Unfortunately you will need to remove them to measure. Lay rotor on flat surface with part wheel touches facing up. Then measure distance from where wheel rests to the ground.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)All the pieces coming together. These are pure $$$$$$$$120247120248

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[JettaGetUpandGo]

Damn, was hoping for/expecting a nice, clean looking rotor. The giant logo is the sole reason I never bought a two-piece rotor kit or wheel spacer made by ECS. Might have to reconsider the RS5 fronts and S4 rears with the standard Girodisc rotors.

[voshmag]

Damn, was hoping for/expecting a nice, clean looking rotor. The giant logo is the sole reason I never bought a two-piece rotor kit or wheel spacer made by ECS. Might have to reconsider the RS5 fronts and S4 rears with the standard Girodisc rotors.Haha. Text line is only 1mm in thickness. Also, no comparison between girodisc and ECS rotors.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[PeteRock]

Haha. Text line is only 1mm in thickness. Also, no comparison between girodisc and ECS rotors.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

Are they available without the text?


Pete

[voshmag]

Are they available without the text?


PeteFor an additional 200 dollars I will remove the text.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

Are they available without the text?


PeteJust so you know... I was teasing. These are for a beta car where I covered most of the cost. Absolutely it will be available with descrete markings for purist and at no additional charge. Haha.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[PeteRock]

Just so you know... I was teasing. These are for a beta car where I covered most of the cost. Absolutely it will be available with descrete markings for purist and at no additional charge. Haha.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

Lol....I figured that....all good! Just sent you a PM with some questions.....thanks man!


Pete

[JettaGetUpandGo]

Haha. Text line is only 1mm in thickness. Also, no comparison between girodisc and ECS rotors.

I understand there is a difference in quality, but the comparison was simply in regards to the giant logo. Call me a purist or whatever you want, but I think company logos plastered on the outside of a car looks tacky, especially when it's prominently visible through the spokes of the wheel. The rotors themselves are going to draw plenty of attention.


Absolutely it will be available with descrete markings for purist and at no additional charge. Haha.

Glad to hear.

[voshmag]

I understand there is a difference in quality, but the comparison was simply in regards to the giant logo. Call me a purist or whatever you want, but I think company logos plastered on the outside of a car looks tacky, especially when it's prominently visible through the spokes of the wheel. The rotors themselves are going to draw plenty of attention.



Glad to hear.Hehehehehehe120885120886120887120888

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[JettaGetUpandGo]

Holy crap. Are those 19" or 20" peelers?

[voshmag]

Holy crap. Are those 19" or 20" peelers?19", no spacers needed... Clearance for days.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[vvenom800tt]

Hehehehehehe120885120886120887120888

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)Looks great. Now lets see if we can replace the 18z with these 😉

Sent from my SM-G960U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

Looks great. Now lets see if we can replace the 18z with these [emoji6]

Sent from my SM-G960U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)Well, it has beem beat on... Driven hard, several spirited drives in the hill country and holding up amazing. The feedback received is "unbelievably powerful and smooth". Well within specs or oem master cylinder and the pedal is outstanding. Dialed in, lots of control. My beta car has crappy OEM pzero tires that are near the end of their life and are the limiting factor. I could feel the tires giving up. I have consistently rocked out 60pmh-0 in 2.66 seconds and 60mph 20mph in 1.75 seconds. When we upgrade the tires im confident we will see low 2second 60-0 times. Also tied for best in show at the Audi state Meet.

All and all, im pretty proud and stoked!121858121859121860121861

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[JettaGetUpandGo]

Brake pad warning light came on today.

How much longer?

[voshmag]

Brake pad warning light came on today.

How much longer?What brake setup? On side note, pads are cheap and rotors are expensive. Replace pads before rotors are scraped past the point of being able to be resurfaced.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[JettaGetUpandGo]

What brake setup? On side note, pads are cheap and rotors are expensive. Replace pads before rotors are scraped past the point of being able to be resurfaced.

Front and rear with Girodisc rotors. At least the fronts to start, then the rears a month or so later as funds allow. Go big or go home, right?

Not too worried about the current pads/rotors.

[voshmag]

Front and rear with Girodisc rotors. At least the fronts to start, then the rears a month or so later as funds allow. Go big or go home, right?

Not too worried about the current pads/rotors.Haha. I missinderstood the question. Dun. Hahaha. Kits on market Friday Eve. Packing like mad right now

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[JettaGetUpandGo]

Haha. I missinderstood the question. Dun. Hahaha. Kits on market Friday Eve. Packing like mad right now

Sounds good! [up]

[vvenom800tt]

Well, it has beem beat on... Driven hard, several spirited drives in the hill country and holding up amazing. The feedback received is "unbelievably powerful and smooth". Well within specs or oem master cylinder and the pedal is outstanding. Dialed in, lots of control. My beta car has crappy OEM pzero tires that are near the end of their life and are the limiting factor. I could feel the tires giving up. I have consistently rocked out 60pmh-0 in 2.66 seconds and 60mph 20mph in 1.75 seconds. When we upgrade the tires im confident we will see low 2second 60-0 times. Also tied for best in show at the Audi state Meet.

All and all, im pretty proud and stoked!121858121859121860121861

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)Thats awesome! I did a manually stop watch time ones with my friend timing me. From 90-0mph in 3.9sec on my 17z with Yellowstuff pads.

This CTS-V kit still has me intrigued if we can fit it under 18" wheels.

Car looks great by the way!





Sent from my SM-G960U using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[JettaGetUpandGo]

I see there are now a total of two kits sold since release. Fess up. Who bought the other? ;)

[voshmag]

I see there are now a total of two kits sold since release. Fess up. Who bought the other? ;)Dis guy.....122965

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[JettaGetUpandGo]

Awesome!

I didn't think to ask about the giant laser engraved logo on the rotor hats when ordering since the off the car rotor pictures didn't show it. Was that just for the prototype set, or did I need to specify no logos?

[voshmag]

Awesome!

I didn't think to ask about the giant laser engraved logo on the rotor hats when ordering since the off the car rotor pictures didn't show it. Was that just for the prototype set, or did I need to specify no logos?Will be twice the size font for you along with etching a camo pattern!

;)

will be descrete marking as requested

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[JettaGetUpandGo]

Will be twice the size font for you along with etching a camo pattern!

;)

will be descrete marking as requested

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)Ah damn. Haha

Thank you sir.

[adkmooserider]

So to confirm, both brakes will fit an s4 with stock oem 19x8.5 peelers et 43? To confirm front pads are Gen 2 ctsv pads? rear are d3 or d4 a8 pads and tesla electronic brake pad.?Rear rotors are oem a8 365 rotors? Front rotors would have to be custom ordered? No drilling/grinding required?

If this is really true, I think i know what the next 30k miles of brakes will be for my front and rears.

[voshmag]

So to confirm, both brakes will fit an s4 with stock oem 19x8.5 peelers et 43? To confirm front pads are Gen 2 ctsv pads? rear are d3 or d4 a8 pads and tesla electronic brake pad.?Rear rotors are oem a8 365 rotors? Front rotors would have to be custom ordered? No drilling/grinding required?

If this is really true, I think i know what the next 30k miles of brakes will be for my front and rears.Yes, front and rear bbk will clear oem 19x8.5 peelers at et43.

Front pads can either be from a cts-v gen 2 (search for 2013) or from a Hellcat. They are same pad fitment.

Rears will be pads from a 2007 Porsche Cayenne/AudinQ7. Rear rotors can either my custom Girodisc 356x26mm (4mm thicker than oem) or OEM D4 A8 rear 356x22mm


Please let me know if I missed anything

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

So to confirm, both brakes will fit an s4 with stock oem 19x8.5 peelers et 43? To confirm front pads are Gen 2 ctsv pads? rear are d3 or d4 a8 pads and tesla electronic brake pad.?Rear rotors are oem a8 365 rotors? Front rotors would have to be custom ordered? No drilling/grinding required?

If this is really true, I think i know what the next 30k miles of brakes will be for my front and rears.As for next 30k miles... Haha must not drive like I do. I definitely see rotors making it 30k (with possible resurface). I typically replace pads much sooner than that. Good thing is the brembos take 2 minutes per corner to swap pads on track days or for maintenance (once wheels are off)

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[p3u]

What are the dimensions of the rear rotor (hat height and annulus in addition to it being 356mm x 26mm)?

Thanks

[adkmooserider]

Yes, front and rear bbk will clear oem 19x8.5 peelers at et43.

Front pads can either be from a cts-v gen 2 (search for 2013) or from a Hellcat. They are same pad fitment.

Rears will be pads from a 2007 Porsche Cayenne/AudinQ7. Rear rotors can either my custom Girodisc 356x26mm (4mm thicker than oem) or OEM D4 A8 rear 356x22mm


Please let me know if I missed anything

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

I are you the only source for front rotors?

[voshmag]

What are the dimensions of the rear rotor (hat height and annulus in addition to it being 356mm x 26mm)?

ThanksOff the shelf rotor specs would be D8 A8 rear specs, in addition rs7 rear wave rotors are compatible. I also have custom made girodisc rotors that are 26mm thick instead of 22mm. They also add huge weight savings and increase in air flow to calipers for cooling.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

I are you the only source for front rotors?Yes, front rotors are proprietary to my kit and 100 percent my design. I am also the only source for replacement rings from Girodisc.

I don't forsee going anywhere anytime soon but should one day I throw in the towel and chase a different venture (gracefully and fulfilling all orders because I am not a chump) Girodisc has commited that they will continue to supply my replacement rings.

Some might not like only one option for front rotors but I went this direction because girodisc is simply the best and in order to perfect this kit a custom rotor was needed.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[adkmooserider]

Yes, front rotors are proprietary to my kit and 100 percent my design. I am also the only source for replacement rings from Girodisc.

I don't forsee going anywhere anytime soon but should one day I throw in the towel and chase a different venture (gracefully and fulfilling all orders because I am not a chump) Girodisc has commited to that they will continue to supply my replacement rings.

Some might not like only one option for front rotors but I went this direction because girodisc is simply the best and in order to perfect this kit a custom rotor was needed.

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

You'll see my order in a coupla days. [race][hail]

[voshmag]

You'll see my order in a coupla days. [race][hail]Outstanding and zero rush or pressure. I am just here answering questions. Intro kits might be sold out though. Few victory pics for fun! Over 30 rear kits rolling around the town
12327412327512327612327712327812328012328112328212 3283123284

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[JettaGetUpandGo]

To make finding pads easier, what year CTS-V should I be searching for? Same for the rear. It's a Cayenne/Touareg caliper, but from what year? Was it a front or rear caliper?

Also, at one point the Magic Pads from Girodisc were mentioned as a possibility. Is that still in development?

[rolandoa1324]

Glad to see someone did wave rotors


Sent from my iPhone using Audizine (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

To make finding pads easier, what year CTS-V should I be searching for? Same for the rear. It's a Cayenne/Touareg caliper, but from what year? Was it a front or rear caliper?

Also, at one point the Magic Pads from Girodisc were mentioned as a possibility. Is that still in development?Girodisc pads will be listed up tonight for all of my kits. Options will be Magic, SS and Race pads.

My b8 front kit fits 2013 CTSV or any year hellcat

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[voshmag]

Sharing two of my favorites... Its so fun receiving all the victory pics!138879138880138881138882138883138884138885138 886

Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)

[v36sedan]

Are these calipers new or refurbished?

[PeteRock]

Are these calipers new or refurbished?

The front 6 piston Brembos are new and the rear 4 piston Brembos are rebuilt


Pete

[adkmooserider]

Sharing two of my favorites... Its so fun receiving all the victory pics!
Sent from my LG-H918 using Audizine mobile app (http://r.tapatalk.com/byo?rid=87676)
Need to buy some pads and get these installed next month

[v36sedan]

Fronts are Brembo 19z correct?