Wheel Spacers

[epraia12]

I was wondering if anyone knows if it is possible to fit wheel spacers from a b8 to a b6 a4. I came accros those spacers but they are for the bigger hub. Let me know thanks.

Sent from my SPH-D710 using Tapatalk 4 Beta

[ECS Tuning-Audi]

You answered your own question. Because of the bigger hub it wouldnt be possible to mount them to your B6 safely.

Jason

[JohnBan]

First off, why do you intend to install spacers? Is it because you want to install alloy wheels or something else? If you really need to employ spacers, you will have to modify the hubs or even replace them with smaller ones, which may not be safe at all.

[VMRWheels]

If you were looking for 10mm spacers, I believe these are what you need: http://www.ebay.com/itm/Wheel-spacers-10mm-Audi-VW-w-bolts-57-1-bore-66-6-hub-/130603989176?pt=Motors_Car_Truck_Parts_Accessories&hash=item1e689ab8b8&vxp=mtr

You could also run the 66.6 spacers intended for the wheels and use 57.1-66.6 hub rings. Just make sure that everything is properly torqued down.

[ECS Tuning-Audi]

First off, why do you intend to install spacers? Is it because you want to install alloy wheels or something else? If you really need to employ spacers, you will have to modify the hubs or even replace them with smaller ones, which may not be safe at all.

Many people install spacers to give their vehicle a wider more aggressive stance. Pushing the wheels closer to the fenders gives a nice beefy filled out appearance over the common sucked in look which many of these cars come with from the factory.

No modifications to the hub is necessary to install spacers.

Jason