ACHTUN!NG | The Audi Q3/Q5/Q7 Thread [Archive]

Dion@Achtuning

09-02-2011, 01:25 PM

http://cdn.hartmannwheels.com/gallery/924/resized_smaller/AchtuningPostCard.jpg

Welcome to the Achtuning "Shop Life" thread! This thread is intended to show off some of our daily routine as well as document the many specials and new products available at Achtuning! For those that do not know us, "welcome!" We hope to get the chance to meet you in person someday. Achtuning (http://achtuning.com/) is owned by Hartmann Wheels (http://hartmannwheels.com/) and we specialize in Audi, BMW, and VW performance upgrades, supplying nationwide distributors and retail customers like you with quality parts by APR, AWE Tuning, H&R, StopTech, Neuspeed, and of course Hartmann Wheels. We are located in Redmond, Washington just south of the Willows Golf Course and very close to the Microsoft Campus. If you plan to stop by for a visit, we are open between 9am and 6pm Monday through Friday. Have a question you want us to address here on the forum? Any future plans or modifications you want to discuss with Achtuning? Post up! We welcome everyone's participation.

[wrench]

(To see our most recent content, skip all the way to the end!)

Dion@Achtuning

09-02-2011, 01:25 PM

http://gallery.achtuning.com/main.php/d/38072-4/5400b.jpg

The QuattroWorld.com Q7 is in for a "stance" consultation. We immediately decided we need to GO WIDE courtesy of TRAK+ Wheel Spacers from our good friends at H&R. Update later... Gorgeous ride though, no?

pcasso87

09-02-2011, 11:04 PM

Hmm i have the same setup i might need a spacer as well. I have the same wheels and i have a box of sport springs sitting in my garage. Pm price for spacers shipped to 78260, do i need wheel bolts??

Dion@Achtuning

09-06-2011, 11:07 AM

Extended wheel bolts (we stock those also) would be needed for H&R's DR-style spacer. We are going to attempt H&R's DRA-style spacers that come with hardware so you would not need to purchase additional wheel bolts. PM sent with pricing. Give us a few days (after QW returns for the install) to confirm fitment before ordering. [up]

pcasso87

09-06-2011, 11:38 AM

Sounds good man, let me know when you have the results.

DetailersDomain

09-06-2011, 12:01 PM

nice!

pcasso87

09-06-2011, 10:04 PM

Do you guys have a front plate delete for the s-line model?? my truck is exactly the same except it does not have the titanium package.

2010S4

09-07-2011, 10:55 AM

Are there any exhaust options for the Q7 3.0T? I can't seem to find any.

Dion@Achtuning

09-07-2011, 12:27 PM

Not yet, at least not through our current exhaust manufacturers.

Do you guys have a front plate delete for the s-line model??

We don't, no... That would be a dealer item. [up]

2010S4

09-08-2011, 03:51 PM

What is the bore on the stock wheels for the 2011 Q7? I have spacers on my TTS and S4 and I know both of those had different bore sizes. I want to get spacers on my Q7 but I want to make sure I get the right size.

Dion@Achtuning

09-09-2011, 09:01 AM

Not only a different bore size but a different bolt pattern, too. The Q7 is a 5x130 bolt pattern with a 71.6 center bore. [up]

2010S4

09-09-2011, 10:32 AM

Ok, good to know. Well keep us updated on the spacers you guys are going to install. I most likely will get some for my Q7 as well.

Dion@Achtuning

09-13-2011, 12:02 PM

http://gallery.achtuning.com/main.php/d/36360-4/3450.jpg

http://gallery.achtuning.com/main.php/d/36350-4/3448.jpg

Bruce's Audi Q7 sits very nicely over a set of our 22" Hartmann HRS4-252 Wheels (http://shop.achtuning.com/Hartmann-B7-HRS4-252-GS-17-18-19-20-22-Inch-Replica-Wheels-for-Audi.aspx) in Hyper Silver. 23mm DR-style H&R Trak+ Spacers (http://shop.achtuning.com/HR-DR-Series-5x130-Bolt-Pattern-Wheel-Spacers.aspx) bring the wheels out closer to the fender for that nice, aggressive look!

2010S4

09-14-2011, 04:17 PM

Do the 23mm spacers cause any problems with tire rubbing? I have the air suspension on my Q7 S-line and I want to make sure there will be no issues with tire rubbing when making a full lock turn. Also are you going to package the spacers and lugs in a package deal anytime soon?

Dion@Achtuning

09-15-2011, 09:45 AM

2010S4

09-16-2011, 10:58 AM

No rubbing on any of these set-ups. [up] In fact Bruce's Q7 had room to come out further but he wanted to keep things "civil". Our H&R spacer prices are very competitive, and so are the hardware we sell with them. On top of that we offer FREE SHIPPING in the Continental US so it won't get much better than that.

So just to make sure I get the right things. I will need to orders of spacers and 2 orders of lugs. How long should I get the bolts?

Thanks for your help.

Dion@Achtuning

09-16-2011, 01:56 PM

The bolt length would depend on what size spacer you pick up. If still going with the 23mm spacer, the bolt length would be 58mm. Ball-seat style bolt if spacing out your factory wheels.

Dion@Achtuning

09-19-2011, 03:15 PM

http://gallery.achtuning.com/main.php/d/38131-4/IMG_4223-2.JPG

We are grateful for images that were just sent to us by one of our customers of this gorgeous Audi Q5 featuring H&R's Sport Spring (http://shop.achtuning.com/HR-29001-1-Sport-Springs-Audi-Q5.aspx) kit and a set of Hartmann HRS4-252GA:M (http://shop.achtuning.com/Hartmann-B7-HRS4-252-GA-M-19-20-Inch-Replica-Wheels-Audi.aspx) wheels. The H&R springs lower the Q5 about 1.6" up front and 1.5" out back, and the wheels are 20x9 with a 40mm offset. Click here (http://gallery.achtuning.com/main.php/v/Customers/Audi/Q5/extreme/?g2_highlightId=38129) to see the rest of the images in our gallery!

Dion@Achtuning

09-23-2011, 01:12 PM

http://cdn.hartmannwheels.com/gallery/1233/original/5473.jpg

We determined the QuattroWorld.com Audi Q7 needed 18mm DR style H&R wheel spacers up front and 30mm DRA style spacers out back to even out the "stance" and give the Q7 a much more aggressive look. Mission accomplished!

Dion@Achtuning

10-26-2011, 12:51 PM

Jim negotiated a Hartmann Wheel install when he bought his new Audi Q5 from Audi Wilsonville in Oregon. Soon after taking delivery, Jim was on our door step in anticipation of having the 20" Hartmann HRS6-204 (http://shop.achtuning.com/Hartmann-HRS6-204-GS-18-19-20-Inch-Replica-Wheels-Audi.aspx) Wheels thrown on his new ride! The factory offsets are always a bit on the weak side and we mentioned to Audi Wilsonville that the 20x9 +25mm offset would be a better fit for the Q5, filling the fenders out nicely and giving it that much needed, aggressive stance. We're glad they went for it, and we're happy to report Jim is a happy customer!

http://gallery.achtuning.com/main.php/d/38401-4/5986.jpg

http://gallery.achtuning.com/main.php/d/38396-4/5985.jpg

Dion@Achtuning

10-28-2011, 01:29 PM

Winter wheel shopping? Be sure to check out our Hartmann Wheel "Blem" & Closeout 2011 Sale (http://www.audizine.com/forum/showthread.php/452490-Hartmann-Wheels-quot-Blem-quot-and-Close-Out-Sale-2011) thread! There are a couple of options there worthy of a look! [up]

Dion@Achtuning

11-22-2011, 12:58 PM

http://shop.achtuning.com/productimages/images/product_images_hr/spacer/HR_20555712B_5x112_57CB_10mm_Spacers.jpg

H&R's Trak+ wheel spacers are now featured in the ACHTUNING online catalog with ACTUAL pictures representing each Audi, Porsche, and VW spacer H&R has to offer, and WE STOCK THEM!! Click the link below to begin shopping for your H&R wheel spacers!!

http://shop.achtuning.com/search.aspx?find=spacer&manufacturer=28

Oh, and if you need help determining what size spacers to run, click here: http://trakplus.com/measure

Q5PDX

12-10-2011, 05:17 AM

That looks awesome. I have a Q5 S line (2011) . Could I run the same rim/tire/spacer combo you have on the Q7 ? , if so what is the spec
Thanks ...

Skyler@Achtuning

12-12-2011, 12:28 PM

The Q5 and Q7 use some pretty different specs though you may be able to use wheel adapters to run the OEM Q7 wheels (5x130 bolt pattern) on the Q5 (5x112 bolt pattern). The OEM Q7 wheels are a 21x10" with an ET44 offset. Adapters are usually available in 20-25mm thickness. Running a 10" wheel with an effective ET24 offset of the Q5 would place the face of the wheel outside of the fenders though which may not be the look you are trying to achieve.

Another option would be to pick up a set of Hartmann HRS6-204 wheels in 20x9.0" ET25 which would be a direct fitment and pretty aggressive looking on the Q5. The wheels are currently only available in gloss silver but you could probably have a local wheel repair shop refinish them in the Audi style titanium finish for a few hundred dollars.

http://shop.achtuning.com/Hartmann-HRS6-204-GS-18-19-20-Inch-Replica-Wheels-Audi.aspx

Dion@Achtuning

12-12-2011, 03:59 PM

http://gallery.hartmannwheels.com/download/20635-4/Audi_Q5_Hartmann_Wheels_HRS6_204_20_RD1.jpg

Ryan sends us pictures of his S-Line Audi Q5 on some 20" Hartmann HRS6-204 wheels! Thanks for sharing, Ryan! [up]

Q5PDX

12-13-2011, 06:12 PM

Thanks guys for the reply. I still think the wheel well is to big on Ryan's , that's what I'm trying to avoid . I already have the Audi 20" rims . Im looking to drop it and add an exhaust system . But I love the aggressive stance of the Black Q7, that's the look I want

Dion@Achtuning

12-30-2011, 10:22 AM

http://gallery.achtuning.com/main.php/d/38936-2/achtuning+-+happy+new+year.jpg

Dion@Achtuning

05-16-2012, 11:38 AM

In 30+ years, this is the first time Hartmann Wheels has their own center cap! [:D]

http://gallery.achtuning.com/main.php/d/41135-4/7864.jpg

Achtuning is proud to offer a free set of Hartmann Wheel caps with every Hartmann Wheel order. Hartmann Wheels are still compatible with select OE wheel caps for those looking for a "factory look." [up]

techm8n

05-16-2012, 02:11 PM

I'm interested in the Hartmann B7 HRS4-252-GS, 20x9, 25 offset for my Audi Q5. Will the tire stick out of the front fender? Do you have pics of this offset on a Q5? Side profile preferably.

Dion@Achtuning

05-17-2012, 03:41 PM

See post #22 (http://www.audizine.com/forum/showthread.php/447362-ACHTUN!NG-The-Audi-Q3-Q5-Q7-Thread?p=6977158&viewfull=1#post6977158).

Dion@Achtuning

05-25-2012, 11:25 AM

Ben picked up his Audi Q5 from University Audi in Seattle and just before taking delivery, he had arranged for his salesman to bring us his new purchase to outfit it with a set of our Hartmann HRS6-204-MA wheels. The similar design to the factory version offers an OEM+ look with our matte-anthracite finish and is a great look for Ben's Q5.

http://gallery.achtuning.com/main.php/d/41535-4/7972.jpg

http://gallery.achtuning.com/main.php/d/41529-4/7971.jpg

techm8n

05-25-2012, 11:44 AM

20x9, 25+ offset?

Dion@Achtuning

05-25-2012, 02:03 PM

Nope, these are the +40s. (only offset available in this finish) I do prefer the +25 offset but that's easily achieved with wheel spacers. [up]

Dion@Achtuning

06-04-2012, 03:22 PM

http://gallery.achtuning.com/main.php/d/41675-4/8057.jpg (http://gallery.achtuning.com/main.php/d/41677-4/8057.jpg) http://gallery.achtuning.com/main.php/d/41681-4/8058.jpg (http://gallery.achtuning.com/main.php/d/41683-4/8058.jpg)

Before and after comparison shots show what a big difference that lower wheel offset makes when its on the car. After installing low-offset-achieving H&R wheel spacers on his Audi TTS, Barry returned with his Q7 so we could install our 22" Hartmann HRS4-252-GS (http://shop.achtuning.com/Hartmann-B7-HRS4-252-GS-20-and-22-inch-Replica-Wheels-for-Q7-and-Touareg.aspx) wheels. The 50mm offset and 9.5" specs sit further out in the fenders and give the Q7 that sportier look. While nothing was needed up front, a pair of H&R's DR-style 23mm spacers (http://shop.achtuning.com/HR-46957161-5x130-DR-23mm-wheel-spacers-for-Audi-Porsche-and-VW.aspx) were added out back to match the wheel position in the fender with the way the fronts sit. The end result is a much sportier version of what rolled off the factory floor, and likely at a fraction of the cost!

http://gallery.achtuning.com/main.php/d/41691-4/8060.jpg

http://gallery.achtuning.com/main.php/d/41696-4/8061.jpg

Dion@Achtuning

09-07-2012, 03:57 PM

http://gallery.achtuning.com/main.php/d/43642-4/0475.jpg

While we are very brand loyal with regard to the parts we sell at Achtuning, we certainly wouldn't turn away an install of reputable-brand parts we don't offer, especially when it comes to brake and suspension upgrades as we feel we specialize specifically in those areas. So when Jason contacted us to install a set of KW V2 coil-overs on his Q5, we were happy to oblige!

http://gallery.achtuning.com/main.php/d/43661-4/0486.jpg

http://gallery.achtuning.com/main.php/d/43666-4/0487.jpg

An already fantastic-looking Audi Q5 thanks to the Caractere body kit and HRE wheels is made even better with the lowered stance and performance-oriented suspension! Thanks for the opportunity, Jason!!

Dion@Achtuning

09-12-2012, 01:21 PM

StopTech has unveiled their new line of racing brake pads!

http://gallery.achtuning.com/main.php/d/43793-4/stracepadspathed.jpg

StopTech, the ultra performance and racing brand from Centric Parts, introduces a new line of StopTech Racing Brake Friction that brings the company’s “Brake Late, Finish First” philosophy to a wider range of racing disciplines. The new racing pads complement the company’s extensive range of high performance brake component and system upgrades - and help turn any StopTech system into a dedicated race system.

Available in four formulations, the new StopTech Racing Brake Pads are engineered to provide optimal friction levels for a variety of different racing applications. All StopTech Racing Brake Pads provide shorter stops, increased control through superior pedal modulation, and fade-free performance at extreme racing temperatures. StopTech Racing pads are designed to provide superior performance in any racing brake system, and match the outstanding performance capabilities drivers have come to expect from all StopTech Racing Brake Systems and components.

StopTech's unique metallic compounds are blended with carbon and graphite particles to provide an optimal high temperature race friction material. The result is smoother, more predictable and more consistent brake engagement along with exceptional release characteristics not found in most other racing friction materials.

StopTech engineers work directly with race teams, often trackside, to gather valuable experience in dynamic real world conditions. Data is immediately integrated into the research and development process, resulting in optimized brake systems for individual racing programs.

StopTech Racing Brake Pads Provide:

Optimized friction levels for shortest stops
Engineered for extreme temperatures
Superb modulation and release characteristics
Low compressibility for precise pedal actuation
Excellent pad and rotor life

Pad Compound Characteristics

SR34 Compound

Superior pedal feel and modulation characteristics
Formulated for high initial bite
Slight torque rise with temperature
Extremely low pad and abraded disc wear
All purpose pad for high grip, high power applications

SR33 Compound

Slight reduction in torque compared to SR34 Compound
Excellent pedal modulation for applications requiring a medium friction level
Flat torque curve with temperature rise
Extreme fade resistance
Great for rear applications that require less friction but same level of control as SR34 Compound

SR32 Compound

Similar friction levels to the SR34 Compound
Linear torque curve with temperature rise with excellent release characteristics
Superb abraded disc wear
Maximum high-temperature stability
For medium to high horsepower applications that require higher friction levels

SR30 Compound

Medium to low friction levels with linear torque curve with rising temperature
Extreme high temperature fade resistance
Excellent modulation and release characteristics
Repeatable performance
For Touring Car rear applications and others requiring lower torque

StopTech Racing Brake Friction products are available now. For more information about any StopTech product or to place an order, visit www.achtuning.com or give us a call - 425-895-0000.

SEXICÄN

09-12-2012, 06:40 PM

How soon do you think once the 3.0T Q5 comes out will you have tuning for it?

EvilllEmpirE

09-13-2012, 05:50 AM

Dion@Achtuning

09-13-2012, 09:33 AM

You probably wouldn't need a spacer, honestly. Put 'em on first, then determine. [up]

We've got one set of "blem" HRS6-204s we can ship now if you're interested (at 10% off) or it'll be about 6-weeks or so before the next container arrives and replenishes our inventory. Feel free to send us your full contact details (name, phone, email, vehicle, wheel selection) and we will be happy to put you on the back-order list and call you when the wheels are back in stock.

Dion@Achtuning

10-01-2012, 11:05 AM

http://gallery.achtuning.com/main.php/d/41417-4/7944.jpg

GOOD NEWS!! MANY of you are on waiting lists for wheels that have been out of stock for a LONG time. It's been frustrating for everyone and we can't thank you enough for your continued patience! As of this morning's sales meeting, we are told the first (of several) Hartmann Wheel containers will be shipping THIS week! That puts us in the 4-week (ish) time frame for delivery of our first shipment. STAY TUNED for Hartmann Wheel delivery updates at ACHTUNING!

SEXICÄN

10-01-2012, 10:55 PM

How soon do you think once the 3.0T Q5 comes out will you have tuning for it?

hello?

Dion@Achtuning

10-02-2012, 12:01 PM

My crystal ball says... [confused] Nada.

I'm sure APR will announce availability once they do/complete development on that platform. [up]

Dion@Achtuning

10-03-2012, 10:45 AM

http://gallery.achtuning.com/main.php/d/44313-1/AchtuningMagHalfAd-StopTech-800px.jpg (http://shop.achtuning.com/)

When you buy a StopTech Big Brake Kit from Achtuning (http://achtuning.com/), we send you a FREE set of matching (OE-sized) rear rotors, pads, and stainless-steel braided brake lines! We'll even ship you these brake parts for free if your order is being delivered to any of the "lower 48" States!!

What other reasons could you possibly need to shop for a BBK at Achtuning? Simply click on the image above to be directed to our website for an online order or call us at 425-895-0000.

Boom

11-14-2012, 03:56 PM

How soon do you think once the 3.0T Q5 comes out will you have tuning for it?

APR is overseas. Europe usually get these models before they come to the states. So expect within a year from arriving to the states. Maybe less.

Boom

11-19-2012, 07:50 PM

http://gallery.achtuning.com/main.php/d/38227-4/5473.jpg

We determined the QuattroWorld.com Audi Q7 needed 18mm DR style H&R wheel spacers up front and 30mm DRA style spacers out back to even out the "stance" and give the Q7 a much more aggressive look. Mission accomplished!

What width,offset,spacers would you need to get the exact same stance on a Q5 with the Hartmann HRS6-204?

Jim negotiated a Hartmann Wheel install when he bought his new Audi Q5 from Audi Wilsonville in Oregon. Soon after taking delivery, Jim was on our door step in anticipation of having the 20" Hartmann HRS6-204 (http://shop.achtuning.com/Hartmann-HRS6-204-GS-18-19-20-Inch-Replica-Wheels-Audi.aspx) Wheels thrown on his new ride! The factory offsets are always a bit on the weak side and we mentioned to Audi Wilsonville that the 20x9 +25mm offset would be a better fit for the Q5, filling the fenders out nicely and giving it that much needed, aggressive stance. We're glad they went for it, and we're happy to report Jim is a happy customer!

http://gallery.achtuning.com/main.php/d/38401-4/5986.jpg

http://gallery.achtuning.com/main.php/d/38396-4/5985.jpg

So these are not Hartmann wheels? OEM?

Skyler@Achtuning

11-20-2012, 10:15 AM

What width,offset,spacers would you need to get the exact same stance on a Q5 with the Hartmann HRS6-204?

Hard to say as the Q7 and Q5 are completely different applications but our 20x9.0" ET25 offset is pretty flush on the Q5.

So these are not Hartmann wheels? OEM?

The wheels on the Q7 are OEM Audi, the wheels on the Q5 are Hartmanns.

Boom

11-21-2012, 07:18 PM

Hard to say as the Q7 and Q5 are completely different applications but our 20x9.0" ET25 offset is pretty flush on the Q5.

The wheels on the Q7 are OEM Audi, the wheels on the Q5 are Hartmanns.

Flush with the front fender or rear?

A4Cabrio

11-27-2012, 09:25 PM

Recently ordered H&R spacers (18 mm front and 30 mm rear) from Achtuning for my S-line Q7 and what a difference they make! Here are few pics.

Before:

http://sphotos-a.xx.fbcdn.net/hphotos-snc6/179362_4313259502777_1562398698_n.jpg

http://sphotos-a.xx.fbcdn.net/hphotos-ash3/75238_4313255502677_790547094_n.jpg

http://sphotos-b.xx.fbcdn.net/hphotos-ash3/556870_4313256902712_1530393487_n.jpg

After

http://sphotos-b.xx.fbcdn.net/hphotos-ash3/556789_4313261702832_1637751959_n.jpg

http://sphotos-a.xx.fbcdn.net/hphotos-ash4/382095_4313263302872_1523652487_n.jpg

http://sphotos-b.xx.fbcdn.net/hphotos-ash4/480971_4313270263046_1779685818_n.jpg

http://sphotos-a.xx.fbcdn.net/hphotos-ash4/483488_4313268863011_246836878_n.jpg

Cottonmouth

12-08-2012, 11:26 AM

Roxxx&co

12-08-2012, 08:03 PM

What exhaust options for a 13 Q5?

Skyler@Achtuning

12-10-2012, 10:31 AM

What exhaust options for a 13 Q5?

Unfortunately we don't have one in our lineup however AWE Tuning may have an exhaust available, thanks!

Dion@Achtuning

12-13-2012, 09:34 AM

http://gallery.achtuning.com/main.php/d/45195-6/AchtuningOnInstagram2.jpg

If you haven't already, sign in and follow us on Instagram @Achtuning! Here's the link to our Instagram online profile: http://instagram.com/achtuning/ And don't forget to tag us using #Achtuning when taking pics of your Achtun'd ride!! [up]

SEXICÄN

12-13-2012, 01:43 PM

APR is overseas. Europe usually get these models before they come to the states. So expect within a year from arriving to the states. Maybe less.

I hope so, My Q5 will be here in less than a week! I don't need a flash yet, but will be looking forward to some extra power out of it!

Dion@Achtuning

12-14-2012, 09:44 AM

http://gallery.hartmannwheels.com/download/23553-4/Hartmann_HGTI_139-MB.jpg (http://shop.achtuning.com/search.aspx?find=HGTI-139-MB)

Q5 owners: Check out these Hartmann HGTI-139-MB (http://shop.achtuning.com/search.aspx?find=HGTI-139-MB) (matte-black) wheels, 18x8 +32mm offset. This simple yet unique design make these an ideal Winter wheel set-up for just about every Audi application and select VW models! Plenty of big brake caliper clearance, too!! And ONLY $124.75 ea!!

http://shop.achtuning.com/search.aspx?find=HGTI-139-MB

And don't forget, you can send us your Tire Rack order directly to us for FREE mounting and balancing. Shop now online or give us a call - 425.895.0000!

Dion@Achtuning

12-20-2012, 12:15 PM

SEXICÄN

12-20-2012, 12:40 PM

Dion,

Tell me about my suspension options for my 2013 Q5...

Dion@Achtuning

12-20-2012, 01:12 PM

As an H&R distributor, our only option for you is their Sport Spring kit which we feature on our website: http://shop.achtuning.com/Suspension-Upgrades-for-Audi-Q5.aspx

You've got our number, Nico. Give us a call. [up]

SEXICÄN

12-20-2012, 01:49 PM

Do you know if H&R will be possibly coming out with coilover for the Q5 3.0T?

yes I do have your number, but on my phone and hard to find time to call...

Dion@Achtuning

12-20-2012, 02:31 PM

Should be speed dial #2 (for "A") [:D]

Haven't heard anything about a coil-over kit becoming available from H&R. (yet)

Dion@Achtuning

12-21-2012, 09:04 AM

12-21-12 is Free Freight Friday at Achtuning!

http://gallery.achtuning.com/main.php/d/45322-1/hartmanndisplaywithbanner800.jpg

Achtuning is offering FREE ground shipping in the lower 48 states on all Hartmann Wheel purchases currently listed at full MSRP! Go online to achtuning.com or call us at 425-895-0000 to place your order!

TODAY IS THE DAY!! This very RARE FREE SHIPPING offer (good within the lower 48 States) on any Hartmann Wheel order not already on sale is on! Take advantage and place an online order at ACHTUNING.com or give us a ring - 425.895.0000!

Dion@Achtuning

12-31-2012, 11:10 AM

http://gallery.achtuning.com/main.php/d/45332-3/achtuning+-+happy+new+year+2013.jpg

ACHTUNING will be closed on New Years Day but will re-open on Wednesday, January 2nd. We still have plenty of Holiday Specials for you to take advantage of! Click the link below to check out our "special offers" summary...

http://achtuning.com/specials/special-offers-summary/

Symko

01-07-2013, 06:31 PM

Dion@Achtuning

01-09-2013, 12:49 PM

Symko

01-09-2013, 01:56 PM

^ That Quattroworld.com Audi Q7 TDI does have the adaptive air suspension, then lowered beyond factory specs using Ross-Tech's VCDS cable and software. The only option we have to lower a Q7 that isn't sitting on air is H&R's Sport Spring kit which brings the vehicle down approximately 1.4" up front and 1.3" out back.

http://shop.achtuning.com/HR-29107-1-Sport-Springs-Audi-Q7.aspx

Would love to see pics if anyone has any. How is the ride? I thought that I read awhile back that the ride was more bouncy than stock and the rear would sag some do to the excessive weight. I could be incorrect but any truth to this?

Dave

Dion@Achtuning

01-14-2013, 01:30 PM

Not my ride. Can't say from personal experience. The owner of the rig is [email protected] - perhaps ping him on his forum?

Dion@Achtuning

01-30-2013, 04:51 PM

http://gallery.achtuning.com/main.php/d/45679-2/24hoursale.jpg

APR is pleased to announce an unplanned 24 hour sale to thank all of their loyal customers and to commemorate Audi’s 1-2 victory and APR’s podium finish at the Rolex 24 Hours of Daytona! The sale is live from January 30th at 6PM to January 31st at 6PM Eastern Standard Time. Shop online at Achtuning.com NOW until 6PM EST tomorrow and get SALE PRICING on just about anything offered by APR - since we STOCK these items your ON SALE purchase will ship immediately!! GO APR!!!

Dion@Achtuning

02-01-2013, 01:08 PM

http://gallery.achtuning.com/main.php/d/47437-3/269256.jpg

Friendly reminder that we do wheel alignments and corner balancing here at ACHTUNING! Send us an email to [email protected] or give us a ring at 425-895-0000 for scheduling and quotes.

Bigdrock8

03-03-2013, 10:23 AM

+1 for 22 inch HRS6 wheels

Cottonmouth

03-03-2013, 08:26 PM

+1 for 22 inch HRS6 wheels

Yes please!

Dion@Achtuning

03-04-2013, 10:30 AM

It's happening. [;)]

Cottonmouth

03-04-2013, 05:17 PM

It's happening. [;)]

Do you have an ETA? I need them in the spring for when my winters come off.

Skyler@Achtuning

03-04-2013, 05:30 PM

Do you have an ETA?

Rough ETA of 10 weeks at this time.

Cottonmouth

03-04-2013, 05:39 PM

That's gonna cut it pretty close.

snopyro

03-06-2013, 02:29 AM

^ That Quattroworld.com Audi Q7 TDI does have the adaptive air suspension, then lowered beyond factory specs using Ross-Tech's VCDS cable and software. The only option we have to lower a Q7 that isn't sitting on air is H&R's Sport Spring kit which brings the vehicle down approximately 1.4" up front and 1.3" out back.

http://shop.achtuning.com/HR-29107-1-Sport-Springs-Audi-Q7.aspx

Is it safe to us H&R springs with OEM q7 struts? I've heard that the ride is bouncier than stock. Would the lowered springs prematurely wear out the stock struts?

Dion@Achtuning

03-06-2013, 09:07 AM

Safe? Absolutely. Bouncier ride? Subjective. And there is always a chance stock shocks will prematurely wear when adding just a spring kit. I have yet to see that happen. (Doesn't mean it doesn't) As long as you're prepared for what could happen and would prefer to have that look then it's a non issue.

lx4life

08-17-2013, 11:43 PM

Rough ETA of 10 weeks at this time. do you have any pics of these on a Q7 yet?

Dion@Achtuning

09-17-2013, 01:09 PM

http://gallery.achtuning.com/main.php/d/48628-4/4960.jpg

A big "Thank you!" to our friends at University Audi for lending us an Audi SQ5 for verifying Hartmann Wheel fitment over those massive brakes! Fortunately we have a good selection of large caliper clearing wheels so your Audi SQ5 Hartmann Wheel options are plentiful! The Hartmann Wheel website will be updated with SQ5 fitment specs shortly and we'll be adding the brand new "Audi SQ5" model section to the Achtuning.com online store soon. Give us a ring at 425-895-0000 and get a head-start on your winter wheel shopping!

www.achtuning.com

Boom

10-05-2013, 07:25 PM

You should make some SQ5 wheels.

Dion@Achtuning

10-28-2013, 10:01 AM

http://gallery.achtuning.com/main.php/d/49517-4/5577.jpg

Shortly after taking delivery of their new brand new Audi SQ5, the Conner’s rolled in from Yakima to pick up a set of 20″ Hartmann HRS6-204-MA (matte-anthracite) wheels to run this Winter. The HRS6-204 is one of many options we have available for SQ5 owners looking for alternative Winter wheel options. Give us a call and let us set you up with the ride look this Winter for your Audi SQ5!

Dion@Achtuning

11-26-2013, 11:21 AM

http://gallery.achtuning.com/main.php/d/49826-2/black-friday-inspiredbymackey.jpg (http://achtuning.com/)

Take advantage of "Black Friday" sale pricing on the following items featured on Achtuning.com (http://achtuning.com/)! Sale pricing begins NOW and ends at 11:59pm Monday, December 2nd.

Hartmann R12 dacromet wheel bolts (http://shop.achtuning.com/search.aspx?find=bolt&manufacturer=10): $.50 ea.
Hartmann R12 nickel plated wheel bolts (http://shop.achtuning.com/search.aspx?find=bolt&manufacturer=10): $1 ea.
Hartmann R13 nickel plated wheel bolts (http://shop.achtuning.com/search.aspx?find=bolt&manufacturer=10): $2 ea.
Hartmann R14 nickel plated wheel bolts (http://shop.achtuning.com/search.aspx?find=bolt&manufacturer=10): $2 ea.
16" BBS RF-320 wheels (http://shop.achtuning.com/bbs-rf-320-16-inch-wheels-for-4x100-vehicles.aspx): $499 set of 4
18" Hartmann HGTI-139 wheels (http://shop.achtuning.com/search.aspx?find=HGTI): $99 ea.
18" Hartmann HS8-454 wheels (http://shop.achtuning.com/search.aspx?find=HS8-454): $99 ea.
19" Hartmann HCC-305 wheels (http://shop.achtuning.com/search.aspx?find=HCC): $125 ea.

Other on-going specials!

FREE rear StopTech SportStop parts with BBK purchase! (http://achtuning.com/featured-products/the-best-offer-youll-find-on-stoptech-brakes/)
Vogtland Coilovers are ON SALE! (http://achtuning.com/featured-products/vogtland-coilover-sale/)
FREE INSTALL of your APR K04 turbo kit! (http://achtuning.com/featured-products/buy-an-apr-k04-turbo-kit-well-install-it-for-free/)
FREE INSTALL of your Hartmann GT cat-back exhaust! (http://achtuning.com/specials/free-install-on-select-hartmann-gt-cat-back-exhausts/)
COMPLETE turbo-back exhaust for VW Golf R ONLY $1299!! (http://achtuning.com/featured-products/3-turbo-back-exhaust-for-vw-golf-r-on-sale-1299/)

Dion@Achtuning

02-06-2014, 10:47 AM

For our local enthusiasts!

http://gallery.achtuning.com/main.php/d/52139-3/StopTech40Off.png

neils

03-18-2014, 08:59 AM

How safe are are the H&R springs in salt and snow? I had 2 Eibach springs snap on me while driving, doing decent damage to my rims. After some research, found out that while other cities use sand and other products to deal with ice, montreal uses salt which corrodes quicker. Furthermore I read that Eibach uses some sort of protective covering to help with squeaks and salt can get under that covering and rust starts to build and eat away at the spring.

So, anyone drive with these springs in winter, to the point where snow packs the wheel wells solid?

Thanks

QUOTE=Dion@Achtuning;8508423]Safe? Absolutely. Bouncier ride? Subjective. And there is always a chance stock shocks will prematurely wear when adding just a spring kit. I have yet to see that happen. (Doesn't mean it doesn't) As long as you're prepared for what could happen and would prefer to have that look then it's a non issue.[/QUOTE]

neils

03-18-2014, 09:03 AM

How does one remove the bolts without damaging the threads? I plan to put on the spacers with rims in the summer and take them off for OEM rims for winter. If one were to use pliers to undo the stock bolts it would strip the threads. Assuming these longer bolts just thread right into the hub.
Thanks

Dion@Achtuning

03-18-2014, 11:47 AM

How safe are are the H&R springs in salt and snow? I had 2 Eibach springs snap on me while driving, doing decent damage to my rims. After some research, found out that while other cities use sand and other products to deal with ice, montreal uses salt which corrodes quicker. Furthermore I read that Eibach uses some sort of protective covering to help with squeaks and salt can get under that covering and rust starts to build and eat away at the spring.

H&R springs are powder coated as well to protect against corrosion but ANY spring (including OEM springs) have the potential to wear over time, especially in places where corrosive materials (like salt) are used. Just need to keep those suspension parts as clean as possible.

How does one remove the bolts without damaging the threads? I plan to put on the spacers with rims in the summer and take them off for OEM rims for winter. If one were to use pliers to undo the stock bolts it would strip the threads. Assuming these longer bolts just thread right into the hub.
Thanks

A standard 17mm hex socket will suffice. There shouldn't be a concern over damaging threads while removing a bolt if you're using the correct tools. Follow OEM torque specs as well. (Or simply seek professional assistance for install.)

neils

03-18-2014, 03:28 PM

Thanks Achtuning for answering my questions below and helping me work towards my own Hartmann setup on my Q7. One more question, why not swap out to longer studs (to accomodate spacers) instead of recommending longer bolts. From what I read, bolts are a real pain to deal with, since wheel installation becomes more troublesome during wheel swaps between seasons (winter/summer). Mechanics tend to like to slap a wheel onto some studs, let it hang while they airgun the nuts on. I can see them swearing if they had to eyeball a bolt into a hole while bearing the weight of a 22" wheel with spacer, weighlifting it up onto the hub while the car is on a lift, and then hold it there while shooting for that hole. At that point, looks like a 2 person job for sure.

Can one simply remove the stock OEM studs from the rear hubs (for Q7 application), swap out to longer studs, and then slap on the spacer and wheel ??

Of course by doing it this way, this complicates the next season wheel swap, as the longer studs in the rear would need to be removed again to go back to OEM studs, to put back on the OEM wheels without spacers.

I really want to avoid using the spacers in our harsh winters.

Your thoughts ??

Thanks !!

H&R springs are powder coated as well to protect against corrosion but ANY spring (including OEM springs) have the potential to wear over time, especially in places where corrosive materials (like salt) are used. Just need to keep those suspension parts as clean as possible.

A standard 17mm hex socket will suffice. There shouldn't be a concern over damaging threads while removing a bolt if you're using the correct tools. Follow OEM torque specs as well. (Or simply seek professional assistance for install.)

Skyler@Achtuning

03-18-2014, 03:37 PM

This may help:
http://shop.achtuning.com/Hartmann-Wheel-Hanger-for-Audi.aspx
http://shop.achtuning.com/productimages/Hartmann/Hartmann_Accessories/Hartmann_Wheel_Hanger.jpg

neils

03-19-2014, 06:45 AM

Thanks for all the useful info Achtuning !! So if I were to remove my studs permanently to move to bolts, and only wanted to have the H&R spacers on with the Hartmann 22's in the summer, and return to stock OEM 20's without spacers for the winter, could I run a full bolt only setup ? In other words, if I move to the recommended 58mm bolts with a 23mm spacer + 22s for the Q7, can I assume that for stock, I would use a 58mm-23mm=35mm?? If so, then H&R only make a 30mm and 37mm, so what would be my other option for stock bolts ? I really want to avoid having to re-install the studs every winter.

Thanks
Neil

Skyler@Achtuning

03-19-2014, 11:27 AM

I would go with our 37mm bolts, 2mm too long should not be a problem on the Q7. The other option is the Audi dealership but likely at 2-3x the cost of our bolts.
Thanks Neil!

wahpao

04-14-2014, 09:34 PM

^ That Quattroworld.com Audi Q7 TDI does have the adaptive air suspension, then lowered beyond factory specs using Ross-Tech's VCDS cable and software.
http://shop.achtuning.com/HR-29107-1-Sport-Springs-Audi-Q7.aspx

Dion, could you give some more info/link to lowering through Vag Com. Also could you give me a price quote on the Q7 peelers with stock specs in titanium finish. thanks

Dion@Achtuning

05-23-2014, 02:27 PM

http://gallery.achtuning.com/main.php/d/55259-7/Free-Alignment-Special.jpg

Buy and install H&R or Vogtland suspension upgrades at Achtuning and receive a FREE wheel alignment once that new suspension has had time to settle! This promotion will last through the month of June. Check out your suspension options by visiting our online store (http://shop.achtuning.com/) or call 425-895-0000 and let’s upgrade your suspension!

iconoclast

08-04-2014, 08:09 PM

any photos of the PQ6 "Peeler" wheels in 22" on a Q7?
i noticed these are et50 and 9.5" when stock are et44 and 10".
the stock wheels are pretty conservative and recessed... do these 22" sit recessed in the wheel well?

Dion@Achtuning

08-05-2014, 10:01 AM

i noticed these are et50 and 9.5" when stock are et44 and 10".
the stock wheels are pretty conservative and recessed... do these 22" sit recessed in the wheel well?

Compared to those stock specs you list, yes by 12mm. Sadly, no images of the 22" HRS6-204s (http://shop.achtuning.com/Hartmann-HRS6-204-MA-22-Inch-Replica-Wheels-Audi-Q7-VW-Touareg.aspx) on a Q7 yet but the pic below should give you an idea as the Hartmann HRS4-252s (http://shop.achtuning.com/Hartmann-HRS4-252-GS-20-and-22-inch-Replica-Wheels-for-Q7-and-Touareg.aspx) share the same spec...

http://gallery.achtuning.com/main.php/d/36329-4/3434.jpg

We also stock H&R wheel spacers for the Q7 which were added to this same Q7 to achieve a better over-all "stance".

http://gallery.achtuning.com/main.php/d/36360-4/3450.jpg

( ^ a pair of 23mm spacers (http://shop.achtuning.com/HR-46957161-5x130-DR-23mm-wheel-spacers-for-Audi-Porsche-and-VW.aspx) were added, front and rear.)

Dion@Achtuning

08-05-2014, 12:46 PM

Brett picked up a 20" set of Hartmann HRS6-204-GS (http://shop.achtuning.com/Hartmann-HRS6-204-GS-20-Inch-Replica-Wheels-Audi-Q7.aspx) wheels since our MAs are still on order then had them powder-coated a custom color. Now he's back to have his stock tires swapped over to his new custom colored Hartmann Wheels!

http://gallery.achtuning.com/main.php/d/56625-4/1804.jpg

Dion@Achtuning

08-28-2014, 02:50 PM

http://gallery.achtuning.com/main.php/d/56890-6/hrs4252pcs.jpg

Anyone interested in a set of 20" 5x130 Hartmann HRS4-252 wheels powder-coated silver?
• 20×9 et25
• 5×130
• $1199 for a set of 4!

AudiGunner1

10-06-2014, 08:14 PM

Has anyone gone with 30mm back and 23mm front wheel spacers on 22 inch rims? I replaced the 21 inch rims (295/35R21) on my 2009 Q7 S-Line with 22 inch rims (285/35R22) as replacement tires on the 21 inch rims was ridiculously expensive in my opinion and I found a good 'wheels+tires' deal on the 22s. I now want to add wheel spacers and am debating which ones to get. 23mm back and 18mm front seems a popoular choice but I've also seen 30mm back and 18mm front or even 23mm back and front. If anyone out there has gone with 30mm back and 23mm front on 22 inch rims I'd love to hear from you as to whether it's an appropriate option and if you have photos even better. That said if for any reason anyone knows why this would be a bad option please let me know why. Any and all feedback appreciated. Cheers!

Dion@Achtuning

10-07-2014, 11:57 AM

Will ultimately depend on the profile of your tires and ride height... We bumped down from a 23mm to an 18mm on a lowered (via VCDS) Q7 because at full lock, there would be tire rub with the inner fender liner.

Dion@Achtuning

10-28-2014, 12:21 PM

Achtuning is excited to announce the arrival of two NEW additions to the Hartmann Wheel line-up!

HRS7-163-MA:M (matte-anthracite/machined)

http://gallery.achtuning.com/main.php/d/57484-7/6438.jpg

The Hartmann HRS7-163-MA:M is currently available in the following specs:

* 19×8.5 +25, $310 ea.
* 19×8.5 +38, $310 ea.

HRS6-091-MA:M (matte-anthracite/machined)

http://gallery.achtuning.com/main.php/d/57476-7/6418.jpg

The Hartmann HRS6-091-MA:M is currently available in the following specs:

* 19×8.5 +25, $310 ea.
* 19×8.5 +38, $310 ea.
* 20×9 +29, $370 ea.
* 20×9 +40, $370 ea.

As with all high quality Hartmann Wheels, factory Audi center caps and factory wheel bolts are compatible. These are IN STOCK, ready to ship! Place an online order by visiting our online store (http://shop.achtuning.com/) or call 425-895-0000.

Dion@Achtuning

11-24-2014, 10:56 AM

http://gallery.achtuning.com/main.php/d/57928-4/7260.jpg

Wanting to use up the tread on the new-ish tires, Kenneth had us swap out his stock rollers for the new Hartmann HRS7-163s, 19x8.5 +25.

Dion@Achtuning

11-26-2014, 10:41 AM

http://gallery.achtuning.com/main.php/d/57947-4/pullover_black.jpg (http://gallery.achtuning.com/main.php/d/57947-4/pullover_black.jpg)

Bundle up with an ACHTUNING pull-over hoodie (http://shop.achtuning.com/Achtuning-Black-Hoodie-with-Red-and-White-Logo.aspx) this Winter, only $39.95 shipped! (Avail. sizes: Mens’s M-XL)

Dion@Achtuning

12-30-2014, 09:14 AM

A set of 20" Hartmann HRS6-091 wheels (http://shop.achtuning.com/Hartmann-HRS6-091-MA-M-19-20-Inch-Replica-Wheels-Audi-Q5-SQ5.aspx) were installed on a local SQ5 for this Winter season...

http://gallery.achtuning.com/main.php/d/58880-4/7638.jpg
http://gallery.achtuning.com/main.php/d/58890-4/7640.jpg

Wheel spec installed is 20x9 +29. We also installed a set of H&R's 15mm wheel spacers (http://shop.achtuning.com/HR-3055668-5x112-DR-6656mm-CB-15mm-wheel-spacers-for-Audi.aspx) out back to even out the stance a bit.

particulardude

01-04-2015, 03:43 PM

^ That Quattroworld.com Audi Q7 TDI does have the adaptive air suspension, then lowered beyond factory specs using Ross-Tech's VCDS cable and software. The only option we have to lower a Q7 that isn't sitting on air is H&R's Sport Spring kit which brings the vehicle down approximately 1.4" up front and 1.3" out back.

Been digging to find the exact specs on the Quattroworld Q7 suspension - so you're saying this stance was achieved by recoding the air suspension and adding spacers? No other suspension parts? Thanks for any info!

Dion@Achtuning

01-05-2015, 11:34 AM

^ correct.

particulardude

01-05-2015, 04:57 PM

Amazing - I don't think it could look any better.

Brian@AudiMV

03-24-2015, 04:47 PM

Dion,

Do you remember what size those tires were? They look to have a little more sidewall than the OEM spec 20s, but I didn't think you could go any higher without touching suspension components.

A set of 20" Hartmann HRS6-091 wheels (http://shop.achtuning.com/Hartmann-HRS6-091-MA-M-19-20-Inch-Replica-Wheels-Audi-Q5-SQ5.aspx) were installed on a local SQ5 for this Winter season...

http://gallery.achtuning.com/main.php/d/58880-4/7638.jpg
http://gallery.achtuning.com/main.php/d/58890-4/7640.jpg

Wheel spec installed is 20x9 +29. We also installed a set of H&R's 15mm wheel spacers (http://shop.achtuning.com/HR-3055668-5x112-DR-6656mm-CB-15mm-wheel-spacers-for-Audi.aspx) out back to even out the stance a bit.

q5 dave

03-25-2015, 08:37 AM

pm'd

Dion@Achtuning

03-25-2015, 12:05 PM

^ Replied.

Do you remember what size those tires were?

Sorry, I sure don't! We wouldn't tell our customers to deviate from factory spec though and these are dedicated Winter tires...

Brian@AudiMV

03-25-2015, 01:43 PM

Bummer, thanks! I can almost make out the sidewall on the tire leaning, but can't tell if it's a 255 (factory) or 265. I must assume it is a 255 per your reply.

Appreciate the prompt reply, those 20s are gorgeous!

^ Replied.

Sorry, I sure don't! We wouldn't tell our customers to deviate from factory spec though and these are dedicated Winter tires...

j_vincent

03-25-2015, 02:49 PM

Dion@Achtuning

03-25-2015, 04:02 PM

We haven't seen a Q3 in-house yet to be able to determine fitment with any our wheels. That said, looking at specs available with other wheel brands, I have a feeling there would not be any fitment issues. Wanna be the first? [:D]

Dion@Achtuning

03-25-2015, 04:07 PM

I can almost make out the sidewall on the tire leaning, but can't tell if it's a 255 (factory) or 265. I must assume it is a 255 per your reply.

LOL, duh... I didn't think to look at the original (larger) image to see if size was visible. It is. Definitely a 255. [up]

brucebanner

04-08-2015, 09:38 AM

any sales soon? really interested in getting HRS6-204 22". Do these come in sivler finish or just the anthracite finish? hoping you guys have a sale soon, can you get me a quote with some tires, install and everything?

Dion@Achtuning

04-08-2015, 11:49 AM

Email us ([email protected]) and we will gladly send a quote.

No sales expected any time soon. In fact it's pretty rare that new Hartmann Wheels are on sale. Check out our "blem" (http://shop.achtuning.com/Hartmann-Blemished-Wheel-Set-List.aspx) or "garage sale" (http://achtuning.com/specials/achtuning-garage-sale/) section for deals every now and then.

q5 dave

04-08-2015, 11:53 AM

Will you have the 20" Hartmann HRS6-091 in stock anytime soon? last i heard it was "sometime this summer"

Dion@Achtuning

04-08-2015, 04:02 PM

Unfortunately that ETA hasn't changed. Are you on our call-back list? If not, contact us (by phone or email) so we can put you on it! [up]

juanduro

05-28-2015, 01:34 PM

Hi,
I just purchased a 2015 Q7 Premium Plus. Also just got the S-Line 21" wheels and arches. I think the front looks ok bu the rears are (after the wheel arches) too tucked in. My questions is : are there any issues with only installing the H&R 23mm rear spacers ?

Dion@Achtuning

06-03-2015, 11:13 AM

My questions is : are there any issues with only installing the H&R 23mm rear spacers ?

Not at all! [up]

juanduro

06-06-2015, 12:02 PM

Hi i order the 23mm spacers with 58mm bolts and was so exciter to install them today. But when i opened the box found the spacers :-) but the bolts say 48mm. :-( will they fit? Or should i request for the longer ones. Bummer :-(

Dion@Achtuning

06-08-2015, 02:57 PM

^ Saw this after our phone call this morning. Sorry again for the inconvenience - incorrect bolts were indeed pulled. We've got that replacement order already en route! [up]

Dion@Achtuning

08-04-2015, 02:56 PM

http://gallery.achtuning.com/main.php/d/63930-7/HTT-256-MAM.jpg (http://shop.achtuning.com/Hartmann-HTT-256-MA-M-18-19-20-Inch-Replica-Wheels-Audi-Q5-SQ5.aspx)

One of our most popular, the Hartmann HTT-256-MA:M wheels (http://shop.achtuning.com/Hartmann-HTT-256-MA-M-18-19-20-Inch-Replica-Wheels-Audi-Q5-SQ5.aspx) are back in stock at Achtuning! Call 425-895-0000 or order online by clicking the image above!

Jupiteraudi

11-05-2015, 09:27 AM

I believe it was mentioned earlier in this thread but I'd like to confirm the oem bolt length for a 2015 Q7 TDI. Are they 35mm? I'm on the 21' peelers.

Dion@Achtuning

11-05-2015, 11:03 AM

I'd like to confirm the oem bolt length for a 2015 Q7 TDI. Are they 35mm?

Yes, they are. [up]

rnp614

11-20-2015, 09:42 PM

Any specials for us Q7 folks looking to pick up a set of winter wheels? PM if you have something for me!

Dion@Achtuning

11-23-2015, 12:38 PM

Getting that PM written up now. Check inbox shortly. [up]

Dion@Achtuning

02-03-2016, 01:46 PM

http://gallery.achtuning.com/main.php/d/65791-9/AchtuningMagHalfAd-AWEnewlowprices.png (http://shop.achtuning.com/exhaust-upgrades-for-audi-q5.aspx)

Achtuning is announcing new low prices on AWE Tuning exhaust systems starting Monday, February 8th. We will be lowering our prices and offering an additional 8% off those lower prices with FREE SHIPPING anywhere in the “Lower 48!” No tax for our out-of-state customers!! And even better, Achtuning is stocking the most popular applications so your order ships as soon as you “check out” online. Contact the Achtuning sales team with any questions, and thanks in advance for your order!