Detailer's Domain: 2010 Audi S4 Daily Driver - Updates and Mods

[DetailersDomain]

Phantom Black/Black with Silver inserts

This was a new car prep that required clay and PO85RD, we finished with Collinite and Swissvax Divine. (unfortunately the car will be sitting outside for most of its life)

We also wrapped the front clip with 3m PPF.

Products used:
Exterior:
Lusso AutoBathe (http://www.detailersdomain.com/lussoautobathe.aspx)
Uber Boar's Hair Wash Brush 7 inch (http://www.detailersdomain.com/index.asp?PageAction=VIEWPROD&ProdID=419)
Swissvax Yellow Clay Bar and Optimum Instant Detail Spray and Gloss Enhancer (https://www.detailersdomain.com/index.asp?PageAction=VIEWPROD&ProdID=301)
Einszett Spray Wax (https://www.detailersdomain.com/index.asp?PageAction=VIEWPROD&ProdID=32)
P21S Finish Restorer Metal Polish (https://www.detailersdomain.com/index.asp?PageAction=VIEWPROD&ProdID=26)(on the tips)
Menzerna PO85RD (http://www.detailersdomain.com/index.asp?PageAction=VIEWPROD&ProdID=102)
Collinite Insulator Wax (http://www.detailersdomain.com/colloniteliquidinsulatorwaxno845.aspx)
Swissvax Divine (http://www.detailersdomain.com/swissvaxdivine.aspx)

Wheels and tires:
P21S Wheel Cleaner Gel (http://www.detailersdomain.com/p21swheelcleanergelformula.aspx)
Swissvax Wheel Brush (http://www.detailersdomain.com/index.asp?PageAction=VIEWPROD&ProdID=195)
Uber Wheel Brush (http://www.detailersdomain.com/index.asp?PageAction=VIEWPROD&ProdID=43)
Uber Spoke Brush (http://www.detailersdomain.com/index.asp?PageAction=VIEWPROD&ProdID=136)
Swissvax Pneu (http://www.detailersdomain.com/index.asp?PageAction=VIEWPROD&ProdID=249)
Swissvax Autobahn (http://www.detailersdomain.com/index.asp?PageAction=VIEWPROD&ProdID=186)

Tools:
Infratech 5300 (http://www.detailersdomain.com/index.asp?PageAction=VIEWPROD&ProdID=328)
Flex 3403 (http://www.detailersdomain.com/theuberflexl3403vrgbasekitwith4pads.aspx)
The Uber Foam Pads (5.5inch) (http://www.detailersdomain.com/index.asp?PageAction=VIEWCATS&Category=106)
Tons of "Uber" Microfiber Towels
Uber Drying Towels (http://www.detailersdomain.com/index.asp?PageAction=VIEWCATS&Category=10)
Brushes (http://www.detailersdomain.com/index.asp?PageAction=VIEWCATS&Category=53)
Gilmour Foam Gun (http://www.detailersdomain.com/index.asp?PageAction=VIEWPROD&ProdID=99)

To the pics:

Before:
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/dirtycar.jpg

Dirty Wheels
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/dirtywheels.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/dirtywheels2.jpg

Wash
Tom on the foam gun
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/tomwashingthecardown.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/lussobath.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/uberbrush.jpg

Wheels being worked on
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/wheelclean1.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/wheelclean2.jpg

Debadged:
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/v6t2.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/debadge.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/leftoveradhesive.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/debadged.jpg

Tagged:
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/logoshot.jpg

Engine shot:
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/engine.jpg

interior shots:
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/doorsills.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/frotdoorpanel.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/doorpanel.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/lightswitch.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/rearseats.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/cockpit.jpg

Rear bumper film install (just partially installed to protect the top)
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/rearbumperbeingwrap.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/finalshot.jpg

Polished
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/hood.jpg

Front end install:
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/wrapnose.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/wrapnose2.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/hoodwrap2.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/hooddone.jpg

[DetailersDomain]

Final shots:
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/polished2.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/polished1.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/sideshot.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/polishedwaxed.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/wheelsdone2.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/wheelsdone.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/after1.jpg

[02A4TURBO]

Looks verrrry familiar? [:D]

Enjoy... looks gorgeous.

[A4Ber]

Looks verrrry familiar? [:D]

Enjoy... looks gorgeous.

lol Same here~

[DetailersDomain]

yup very familiar.

[ddun]

i need to do that rear bumper film on the top too, i have that exact scuff!

[Blarg]

Great work!!

[Arclight]

That's a really nice car. It's takes a courageous person to take an exacto blade to a brand new S-4 - bravo!

[Tomcat84]

From your list of features I'm puzzled by a bit:


Heated washer

Headlight cleaners


I thought the 2010 Audis had no headlamp washers. Am I missing something? What are these two referring to?

thanks!


Other than that, nice :D

[DetailersDomain]

sorry it was a cut and paste from motor trend.

[ChrisC]

From your list of features I'm puzzled by a bit:


Heated washer

Headlight cleaners


I thought the 2010 Audis had no headlamp washers. Am I missing something? What are these two referring to?

thanks!


Other than that, nice :D

CDN cars have headlamp washers.

[stewie]

What's a fair price for 3M Clear Bra install for the bumper, 1/3 of the hood, the wing mirrors and top of the rear bumper below the trunk lip? I'm in the South Jersey/Philly Area and I am going to get a quote on Saturday. Just want to get an idea of a fair price. Cheers.

[DetailersDomain]

there are so many variables not everyone will quote the same thing.

are you looking at pre cut or custom?

On this S4 we would quote it out at $1300 with 3m PPF.

With other films it would probably be a bit less.

[pharmer]

How easy is it to see the line where the film ends? I too want to get this done and am also in Jersey but don't think I would spend $1300 if I will be able to see a line across my hood forever. That would drive me nuts

[DetailersDomain]

How easy is it to see the line where the film ends? I too want to get this done and am also in Jersey but don't think I would spend $1300 if I will be able to see a line across my hood forever. That would drive me nuts

for a full wrap with tucking it will be much more we are in the shop wrapping a cayenne turbo s right now

[toothysaw2]

phil, car looks great!

what did you use on the interior to protect the silver inserts? i want to get something on mine before blue jean weather shows back up...

[Sharkfin]

bumping this to the top, looks awesome

[DetailersDomain]

hey thanks!

[A4Ber]

hey thanks!

I sent you a pm, please check.

[S4mat]

Looks awesome. Which tools/products did you use for the debadging?

[L0U]

It looks like the polish actually reduced the peel by about 50%. Was the polish for paint flatening, or just a light polish for shine?

[Kendall]

I think you forgot to use the wax polish. Wax surely brings out the shine. It will change the entire look of the body.

[DetailersDomain]

A few good products you can use for maintain the leather.

einszett Leathercare (http://www.detailersdomain.com/1zeinszett-leathercare.aspx) is an all in one product super easy to use.

if you need something stronger you can use

Leather Master Strong Cleaner (http://www.detailersdomain.com/leathermaster-strongcleanerleathercleaner.aspx) followed by Leather Master Vital Conditioner. (http://www.detailersdomain.com/leathermaster-vitalleatherconditioner.aspx)

[DetailersDomain]

A few good products you can use for maintain the leather.

einszett Leathercare (http://www.detailersdomain.com/1zeinszett-leathercare.aspx) is an all in one product super easy to use.

if you need something stronger you can use

Leather Master Strong Cleaner (http://www.detailersdomain.com/leathermaster-strongcleanerleathercleaner.aspx) followed by Leather Master Vital Conditioner. (http://www.detailersdomain.com/leathermaster-vitalleatherconditioner.aspx)

[DetailersDomain]

for debadging we use:

dental floss
3m adhesive remover (http://www.detailersdomain.com/3m-general-adhesivecleaner-08987.aspx)
polish
wax

[DetailersDomain]

Well I'm starting to personalize the Audi a bit.

First up on the mods Bilstein PSS10's

I was pretty skeptical at first as I had PSS9's on my 03 Audi RS6 I would have probably preferred KW's on that one, took the leap on the PSS10's and have to say I'm extremely happy with the decision to go with the PSS10's on the B8 S4.

Take a look.

The PSS10's:
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7302.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7304.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7307.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7328.jpg

Fronts out
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7309.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7315.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7316.jpg

The dial is a huge improvement over the PSS9's
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7318.jpg

The fronts are in (just about)
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7319.jpg

Front of car after we dropped the car off the lift (definitely too low)
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7332.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7333.jpg

Before rear (sorry pretty bad shots)
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7294.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7296.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7299.jpg

After rear (sorry pretty bad shots)
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7339.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7335.jpg

Before fronts
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7298.jpg

After fronts
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7336.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7338.jpg

After a few miles the car settled and we had to adjust it a few times to get it right, I experienced some rubbing with 3 in the car so we raised it and took the front wheel liner bolt off.

After shot with final adjustments and Menzerna Power Lock (http://www.detailersdomain.com/menzerna-powerlock-polymersealant.aspx)
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7374.jpg

Thanks Drive Auto Works in Lydnhurst, NJ

[DetailersDomain]

RS6 Pedals from Alex at EuroPrice

http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9528.jpg

Before and After
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9529.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9530.jpg

[wncommercial]

The RS6 pedals look great! They fit no problems in the S4?

[Sharkfin]

Looks great, now detail that shit [:D]

[DetailersDomain]

Looks great, now detail that shit [:D]

you will have to remove the metal cover from the rs6 pedal and attach it to the stock S4 dead pedal.

yup needs to be cleaned up..

[DetailersDomain]

a couple more pics of the drop.
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9774.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9773.jpg

[SPR415]

how much are those rs6 pedals?

[DetailersDomain]

not sure its been awhile...but Alex from Europrice is who I bought them from.

[bimmerhead12]

Your drop looks perfect Phil! More pics please! Also, let's see your new exhaust!

[chrisjin]

Hi, Philip. What a nice ride!
Could you send me some close up shot of your front bumper? I'd like to see what would be the proper ppf film job on the bumper.
cuz I got my film done few months ago and it is toooooo bad.
[email protected] is my email address.
Thanks in advance.

[DetailersDomain]

thanks I will get them up shortly.

[chrisjin]

Thank you :)

[S-Fore]

M
a couple more pics of the drop.

Are you still happy with the choice of bilsteins? You made reference to the pss9's, which I have and based on my experience would make me not go with another bilstein c/o

[DetailersDomain]

yes I'm pretty happy with them....no complaints on the 2010 S4.

[S3S4]

any tips for de-bading the V6T?

[DetailersDomain]

Finally got a chance to install my RS6 Euro wheel in. Take a look

Before
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_0710.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_0711.jpg

After
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_0714.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_0717.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_0713.jpg

Thanks to Alex at Europrice!

[DetailersDomain]

any tips for de-bading the V6T?

what tips did you need.

I used dental floss
3m adhesive remover
removed the badges
and then polished the light scratches off and
then waxes/sealed the area.

[awhk82]

Stealing your post with my wheel [cool]. You should get a S4 badge for the wheel as well.

BTW, what settings do you have on your PSS10? I am riding F: 8 and R: 6.

http://lh5.ggpht.com/_iwwOWwgRFHU/S_ekICNlKII/AAAAAAAAAJY/UslWaNPBhN0/s800/P1040075.JPG

[A4Ber]

nice steering wheels, I cant use the RS6 wheels since i have a manual. I talked to Alex and he told me to get the TT RS. I probably just going to have someone custom made one for me.

[DetailersDomain]

my pss10's are I believe 6 all around.

[Sharkfin]

Looks great.

[DetailersDomain]

thanks!

[Blake P]

Finally got a chance to install my RS6 Euro wheel in. Take a look

Thanks to Alex at Europrice!

Looks great! Did it require a new airbag? When I looked into getting the RS6 wheel, the price seemed kind of steep but do-able... then I found out a new airbag costs almost as much as the wheel!

[DetailersDomain]

yup needed a new airbag for sure, and yes I have been wondering what in the world was I thinking...get in the car and I forget about the crazy money I just dumped on it. ;)

[DetailersDomain]

Vag Com:

VIM code done.
Seat belt chime off
LED's are at 100%
No more winking
Lap Timer On

[DetailersDomain]

Teaser pics - Iphone shots more to come.

http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_0940.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_0941.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_0942.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_0943.jpg

[LeadToRome]

Looking super sharp, Phil.

Hey do you have an opinion on Zaino? Thanks.

[DetailersDomain]

thanks have you tried Menzerna Power Lock

[DetailersDomain]

http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1089.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1091.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1092.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1094.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1095.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1099.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1104.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1090.jpg

[gaber228]

speechless...

[Blake P]

Looking good Phil. Very well done sir.

[DetailersDomain]

19 x 8.5 et 38
Vredestein Ultrac Sessanta (http://www.detailersdomain.com/vredesteinultracsessanta.aspx)
255 35 19

Teaser pics - Iphone shots more to come.

http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_0940.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_0941.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_0942.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_0943.jpg

Better pics
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1089.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1091.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1092.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1094.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1095.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1099.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1104.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1090.jpg

5mm eibach spacers on
http://i653.photobucket.com/albums/uu256/ezdetail00/audi%20s4/IMG_0053.jpg
http://i653.photobucket.com/albums/uu256/ezdetail00/audi%20s4/IMG_0054.jpg
http://i653.photobucket.com/albums/uu256/ezdetail00/audi%20s4/IMG_0058.jpg
http://i653.photobucket.com/albums/uu256/ezdetail00/audi%20s4/IMG_0047.jpg
http://i653.photobucket.com/albums/uu256/ezdetail00/audi%20s4/IMG_0049.jpg
http://i653.photobucket.com/albums/uu256/ezdetail00/audi%20s4/IMG_0050.jpg

Updated pic
http://i46.photobucket.com/albums/f149/pyiu/work/IMG_1733.jpg

(will drop the car a bit and see how it looks. more to come)

[DetailersDomain]

thanks Blake and Gaber

[krunko]

Looking super sharp, Phil.

Hey do you have an opinion on Zaino? Thanks.

Yeah....what he asked.

[DetailersDomain]

currently Menzerna Power Lock (http://www.detailersdomain.com/menzerna-powerlock-polymersealant.aspx) is probably the best for slickness, application, and looks.

[DetailersDomain]

Power Lock on a few cars we did recently.

http://i46.photobucket.com/albums/f149/pyiu/work/aston%20martin%20jay/IMG_1206.jpg
http://i46.photobucket.com/albums/f149/pyiu/work/aston%20martin%20jay/IMG_1193.jpg
http://i46.photobucket.com/albums/f149/pyiu/work/davem3e90/IMG_1024.jpg
http://i46.photobucket.com/albums/f149/pyiu/work/davem3e90/IMG_1038.jpg

[DetailersDomain]

2010 Phantom Black/Black with Silver inserts

This was a new car prep that required clay and PO85RD, we finished with Collinite and Swissvax Divine. (unfortunately the car will be sitting outside for most of its life)
We also wrapped the front clip with 3m PPF.

Products used:
Exterior:
Lusso AutoBathe (http://www.detailersdomain.com/lussoautobathe.aspx)
Uber Boar's Hair Wash Brush 7 inch (http://www.detailersdomain.com/index.asp?PageAction=VIEWPROD&ProdID=419)
Swissvax Yellow Clay Bar and Optimum Instant Detail Spray and Gloss Enhancer (https://www.detailersdomain.com/index.asp?PageAction=VIEWPROD&ProdID=301)
Einszett Spray Wax (https://www.detailersdomain.com/index.asp?PageAction=VIEWPROD&ProdID=32)
P21S Finish Restorer Metal Polish (https://www.detailersdomain.com/index.asp?PageAction=VIEWPROD&ProdID=26)(on the tips)
Menzerna PO85RD (http://www.detailersdomain.com/index.asp?PageAction=VIEWPROD&ProdID=102)
Collinite Insulator Wax (http://www.detailersdomain.com/colloniteliquidinsulatorwaxno845.aspx)
Swissvax Divine (http://www.detailersdomain.com/swissvaxdivine.aspx)

Wheels and tires:
P21S Wheel Cleaner Gel (http://www.detailersdomain.com/p21swheelcleanergelformula.aspx)
Swissvax Wheel Brush (http://www.detailersdomain.com/index.asp?PageAction=VIEWPROD&ProdID=195)
Uber Wheel Brush (http://www.detailersdomain.com/index.asp?PageAction=VIEWPROD&ProdID=43)
Uber Spoke Brush (http://www.detailersdomain.com/index.asp?PageAction=VIEWPROD&ProdID=136)
Swissvax Pneu (http://www.detailersdomain.com/index.asp?PageAction=VIEWPROD&ProdID=249)
Swissvax Autobahn (http://www.detailersdomain.com/index.asp?PageAction=VIEWPROD&ProdID=186)

Tools:
Infratech 5300 (http://www.detailersdomain.com/index.asp?PageAction=VIEWPROD&ProdID=328)
Flex 3403 (http://www.detailersdomain.com/theuberflexl3403vrgbasekitwith4pads.aspx)
The Uber Foam Pads (5.5inch) (http://www.detailersdomain.com/index.asp?PageAction=VIEWCATS&Category=106)
Tons of "Uber" Microfiber Towels
Uber Drying Towels (http://www.detailersdomain.com/index.asp?PageAction=VIEWCATS&Category=10)
Brushes (http://www.detailersdomain.com/index.asp?PageAction=VIEWCATS&Category=53)
Gilmour Foam Gun (http://www.detailersdomain.com/index.asp?PageAction=VIEWPROD&ProdID=99)

To the pics:

Before:
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/dirtycar.jpg

Dirty Wheels
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/dirtywheels.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/dirtywheels2.jpg

Wash
Tom on the foam gun
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/tomwashingthecardown.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/lussobath.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/uberbrush.jpg

Wheels being worked on
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/wheelclean1.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/wheelclean2.jpg

Debadged:
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/v6t2.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/debadge.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/leftoveradhesive.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/debadged.jpg

Tagged:
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/logoshot.jpg

Engine shot:
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/engine.jpg

interior shots:
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/doorsills.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/frotdoorpanel.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/doorpanel.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/lightswitch.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/rearseats.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/cockpit.jpg

Rear bumper film install (just partially installed to protect the top)
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/rearbumperbeingwrap.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/finalshot.jpg

Polished
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/hood.jpg

Front end install:
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/wrapnose.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/wrapnose2.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/hoodwrap2.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/hooddone.jpg

[DetailersDomain]

Final shots:
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/polished2.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/polished1.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/sideshot.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/polishedwaxed.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/wheelsdone2.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/wheelsdone.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/detail%20pics/after1.jpg

[DetailersDomain]

Well I'm starting to personalize the Audi a bit.

First up on the mods Bilstein PSS10's

I was pretty skeptical at first as I had PSS9's on my 03 Audi RS6 I would have probably preferred KW's on that one, took the leap on the PSS10's and have to say I'm extremely happy with the decision to go with the PSS10's on the B8 S4.

Take a look.

The PSS10's:
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7302.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7304.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7307.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7328.jpg

Fronts out
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7309.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7315.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7316.jpg

The dial is a huge improvement over the PSS9's
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7318.jpg

The fronts are in (just about)
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7319.jpg

Front of car after we dropped the car off the lift (definitely too low)
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7332.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7333.jpg

Before rear (sorry pretty bad shots)
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7294.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7296.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7299.jpg

After rear (sorry pretty bad shots)
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7339.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7335.jpg

Before fronts
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7298.jpg

After fronts
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7336.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7338.jpg

After a few miles the car settled and we had to adjust it a few times to get it right, I experienced some rubbing with 3 in the car so we raised it and took the front wheel liner bolt off.

After shot with final adjustments and Menzerna Power Lock (http://www.detailersdomain.com/menzerna-powerlock-polymersealant.aspx)
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7374.jpg

Thanks Drive Auto Works in Lydnhurst, NJ

[DetailersDomain]

RS6 Pedals from Alex at EuroPrice

http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9528.jpg

Before and After
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9529.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9530.jpg

[DetailersDomain]

a couple more pics of the drop.
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9774.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9773.jpg

[DetailersDomain]

Finally got a chance to install my RS6 Euro wheel in. Take a look

Before
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_0710.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_0711.jpg

After
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_0714.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_0717.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_0713.jpg

[DetailersDomain]

Teaser pics - Iphone shots more to come.

http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_0940.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_0941.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_0942.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_0943.jpg

http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1089.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1091.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1092.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1094.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1095.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1099.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1104.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1090.jpg

[DetailersDomain]

5mm eibach spacers on
http://i653.photobucket.com/albums/uu256/ezdetail00/audi%20s4/IMG_0053.jpg
http://i653.photobucket.com/albums/uu256/ezdetail00/audi%20s4/IMG_0054.jpg
http://i653.photobucket.com/albums/uu256/ezdetail00/audi%20s4/IMG_0058.jpg
http://i653.photobucket.com/albums/uu256/ezdetail00/audi%20s4/IMG_0047.jpg
http://i653.photobucket.com/albums/uu256/ezdetail00/audi%20s4/IMG_0049.jpg
http://i653.photobucket.com/albums/uu256/ezdetail00/audi%20s4/IMG_0050.jpg

Updated pic
http://i46.photobucket.com/albums/f149/pyiu/work/IMG_1733.jpg

(will drop the car a bit and see how it looks. more to come)

[DetailersDomain]

So I dropped the car and its looking pretty good, I may drop it a bit more...not sure...pics to come.

Installed the AWE Boost Gauge Super Nice Piece.

Before
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_0951.jpg

Great looking piece
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_0954.jpg

After
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_0955.jpg

[nick71692]

Very nice compilation of mods. Is the exhaust different??

[pearlescent]

Love the sheer volume of pictures haha

[DetailersDomain]

I have the awe dp and exhaust. I will get some pics and sound clips up shortly

[Legacykid]

Looks sick, loving the steering wheel

[CowtownSteve]

lookin nice!

[DetailersDomain]

thanks!

[Tommy@Nemesis]

Phil-I think the car looks badass and you choice of mods is great. This shot is sick:

http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1090.jpg

Can't wait to see it in person at Waterfest!

[GramCracker]

Phil, is this your car?

[DetailersDomain]

yes this is the current daily.

[DetailersDomain]

Vag COM'd

Removing Seatbelt Chime
Enabling Lap Timer
Video in Motion
Operating Windows and Sunroof with Remote
Turn Signal Winking Off
LED Brightness Up

[Blake P]

Great thread, Phil! You could have just asked Anthony to compile your previous threads into one (what I did anyway) to keep all original posts and replies, but this works as well.

[DetailersDomain]

I did several time lol maybe he will do it now ;)

[DetailersDomain]

http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_0960.jpg

[DetailersDomain]

ok some updates.

the co's are now on 6 all around. the car was dropped a bit more.

the spacers are off as I was rubbing. (the wheel well screw was removed)

not sure how some are running et32 on a lowered car without rubbing, unless I'm either driving hard or the roads around me suck (I would say the later)

[audiophilitis]

ok some updates.

the co's are now on 6 all around. the car was dropped a bit more.

the spacers are off as I was rubbing. (the wheel well screw was removed)

not sure how some are running et32 on a lowered car without rubbing, unless I'm either driving hard or the roads around me suck (I would say the later)

were you rubbing in the front or rear? et 32 for the rears should be fine even when lowered but the front should probably be around et35. assume you're running 255?

[DetailersDomain]

the lm-r's are et38.

I'm rubbing everywhere. lol and with 5mm spacers its et33.

yup 255's but the ultrac's run wider.

I'm rubbing on dips in the rear. I should not rub when all the spacers are off.

[audiophilitis]

the lm-r's are et38.

I'm rubbing everywhere. lol and with 5mm spacers its et33.

yup 255's but the ultrac's run wider.

I'm rubbing on dips in the rear. I should not rub when all the spacers are off.

sorry to hear. my car sits pretty low with the Stasis springs - about a 1.6" drop. no rubbing with 19 x 9 et43 with 255 tires (used to rub with the liner bolt in place). I was thinking of going with 265 tires which will have the effect of running et38 but am a little gun shy spending 1500 on tires only to find out later that they rub. i'll try running 5mm spacers first and see how that works.

[audiophilitis]

I have the awe dp and exhaust. I will get some pics and sound clips up shortly

Did you do the exhaust install at your shop, or did you have AWE do it?

[DetailersDomain]

yup do that let's just say a little too low and a little too wide don't mix with the front fender....ask me how I know.

anyway front spacers are off, fender fixed, co's are raised a bit.

[audiophilitis]

yup do that let's just say a little too low and a little too wide don't mix with the front fender....ask me how I know.

anyway front spacers are off, fender fixed, co's are raised a bit.

do you think rolling the front fenders will help?

[DetailersDomain]

I will probably not roll the fenders, but it can help.

[L0U]

et38 is great for the front on 255s. The rears should be able to handle the 5mm spacer.

[DetailersDomain]

a few more goodies...

Supercharged Badges
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_5594.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_5595.jpg

3m adhesive remover to prep the area
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_5598.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_5599.jpg

Template in place
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_5596.jpg

Supercharged Badge in place
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_5597.jpg

And the finish
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_5601.jpg

[valis]

where do you pick up the templates for the badges?

[DetailersDomain]

they came with the badges with instructions.

[DetailersDomain]

BIG BRAKES!
Stoptech ST-60's (380mm) installed.

Stock Rotor
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1043.jpg

Stoptech Rotor
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1031.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1034.jpg

Out of the box
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1033.jpg

Stock brakes
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1038.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1040.jpg

Stoptechs on the car
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1045.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1050.jpg

on the ground
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1058.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1059.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_5603.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_5605.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_5609.jpg

Thanks to Danny at KMD Tuning (getting them on time for Waterfest and installing them asap)

[CowtownSteve]

WOW! very nice!

[S3S4]

that looks so good. wow.

[Okan509]

Woah! Awesome, huge!

[A4Ber]

very nice!

[Blake P]

Hot damn, great choice with StopTech! You're gonna love them, Phil.

[DetailersDomain]

yup can't go wrong with them had them on my other S4's.

[agkellyboy]

Alright Phil, now I'm bringing the S4 on Saturday and my A4 on Sunday. Where are you parking?

[DetailersDomain]

I'll be in the BBS Booth ;) (Sander Performance)

[fatbrembos]

wow over all amazing!

[leviathan18]

phil be careful with the calliper finish, we had some issues with them, hope you have fun with the new brakes

[DetailersDomain]

thanks guys!@

[DetailersDomain]

Audi Air S-Line Shift Knob to match the RS6 Wheel

http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1062-1.jpg

Before
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1060.jpg

After
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1064.jpg

Thanks to Alex at Europrice

[wbwynn]

nice improvement; sorry you are so far away, MT6 avail?

[DetailersDomain]

not sure you can email alex at europrice

[nnnick]

Awesome car man! Love your work and following all of your threads.

[Johnny732]

they came with the badges with instructions.

Did you get your badges from the dealer or ECS or one of the other online stores?

[Blake P]

I like the new knob, but prefer the old boot with deviated stitching that matches your seats. Any way to mix and match the two?

[DetailersDomain]

the only problem is I did that to match the steering wheel ;) but I think I can swap it.

[Diesel Clown]

do you have any more interior pics? I'm really starting to like the silver int.

[leviathan18]

I like the new knob, but prefer the old boot with deviated stitching that matches your seats. Any way to mix and match the two?

excellent observation

[dankone]

I noticed this immediately also. Needs the old shift boot to match those seats. The stitching on the steering wheel and shift boot in this car totally sets it off IMO. Porsche style with the deviated stitching.. love it.

[DetailersDomain]

I will get more pics of the interior up.

I will also see what I can do about the boot. but it matches the steering wheel that's why I kept it black.

[csaudis4]

Not sure if you'd be happy if i ask about detailing in your car modding thread, but I saw those pics of cars being power locked so I guess you carelessly gave me a permission lol.

Anyway, Phil, i was using Flex that I got from you today to power lock my car, and the sun just set that suddenly, and I don't have a garage, so I got tempted to finish the job real quick as there were tons of mosquitos biting me. So I wasn't very patient and careful with some area, and I think I might have not done it right on the other area as this was my first time with Flex and power lock. I was wondering if I should keep moving the polisher at one area until all the power lock hazes or should I just cover the area once and proceed to next area? It was very dark and I couldn't be sure if the sealant actually hazed... And for those area that I was not careful with, I simply drove the polisher by for once and didn't move it back and forth. Which way is the right way to do it?

btw, did a quick rinse later tonight after a high way drive, and it was amazing how these sealant can do the job, i didn't wipe it over after rinse and just drove away, while waters just bead up and flew away as speed built up. By the time i got home from carwash, the car was pretty much waterless :p

[DetailersDomain]

power lock is great i'm glad you had a good experience with, many many other have as well including myself.

application, you can apply with the flex at speed 2-3 with a uber black pad, all you need is to do one pass on the panel no need to work it into the paint like a compound or polish as its a sealant.

apply with the machine should take 10-20 minutes on a flex (depending on size of the car) let it haze then remove with a clean microfiber towel.

hope that helps.

[DetailersDomain]

power lock is great i'm glad you had a good experience with, many many other have as well including myself.

application, you can apply with the flex at speed 2-3 with a uber black pad, all you need is to do one pass on the panel no need to work it into the paint like a compound or polish as its a sealant.

apply with the machine should take 10-20 minutes on a flex (depending on size of the car) let it haze then remove with a clean microfiber towel.

hope that helps.

[csaudis4]

Ye great tips. I had a grey pad yesterday I think. However I used speed 5 ;o

I shouldn't be unlucky enough that I have burnt my paint, or should I? What is the indication of a burnt paint?

[DetailersDomain]

you can do 5 if you want but why go that fast when there are no benefits.

Good seeing all of you at Waterfest.

[DetailersDomain]

some shots from WF16
http://i46.photobucket.com/albums/f149/pyiu/work/waterfest%2016%202010/IMG_5654.jpg
http://i46.photobucket.com/albums/f149/pyiu/work/waterfest%2016%202010/IMG_5657.jpg
http://i46.photobucket.com/albums/f149/pyiu/work/waterfest%2016%202010/IMG_5658.jpg

[DetailersDomain]

http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_1069.jpg

[Okan509]

I love this S4!

[csaudis4]

if only i lived in NYC...

[DetailersDomain]

thanks!

[DetailersDomain]

I have a brand new set of PSS10's for $2000 plus shipping. (for the b8 A4/S4) you can email me [email protected]

[harry]

Beautiful car! et38 is perfect.... jealous. Do you have more profile pics or shots to show your drop? You look pretty low.

What happened to your S4 brakes? I'd be interested in buying....

[DetailersDomain]

they are for sale hit me up with an email.

[harry]

they are for sale hit me up with an email.

pm sent.

How many miles/ wear?

[DetailersDomain]

6000 miles. The wear is good ...

calipers/rotors/pads

all good

[L0U]

massive brakes under 19s. sweet. That display stand was great too.

[Tommy@Nemesis]

Looking great of course Phil

[DetailersDomain]

thanks guys!

[DetailersDomain]

couple more pics.

http://i46.photobucket.com/albums/f149/pyiu/work/day%20at%20the%20shop/dd_bbq_003.jpg
http://i46.photobucket.com/albums/f149/pyiu/work/day%20at%20the%20shop/dd_bbq_007.jpg

[vjma]

Very nice Phil. Wish my car can be that clean and shiny.

[K1speeder]

Where did you get your supercharged badges from?

[DetailersDomain]

From Tommy at Winner Audi, but you can pick this up from just about any dealer.

I believe ECS Tuning has them, Europa Parts has them both sponsors.

[vassmar]

Great thread and great taste regarding the car and taste :)

[DetailersDomain]

Great thread and great taste regarding the car and taste :)

thanks!

[kuschmi]

Phil, Will these fit an S5? (the PSS10's you have for sale)

[DetailersDomain]

they will fit the S5 same part number

[audiagb]

why you selling the pss10?

[DetailersDomain]

We sell them, its a new set, I believe the only set in the US till late Oct/Nov.

[DetailersDomain]

after a much overdue cleaning I figured I would take some glam shots....after 8 coats of 1Z einszett Glanz
(http://www.detailersdomain.com/1zeinszett-glanzwax.aspx) ...here you go enjoy!

http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7219.jpg

metallic flakes
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7226.jpg

random shots
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7230.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7231.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7235.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7241.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7250.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7254.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7269.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7270.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7276.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7278.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7279.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7280.jpg

[DetailersDomain]

http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7283.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7285.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7288.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7291.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7293.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7297-1.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7310-1.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7299-1.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7300.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7301.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7233.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7236.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7256.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7258.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7259.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7265.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7267.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7273.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7287.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7292.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7293.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7327.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7328-1.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7329-1.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7321.jpg

Enjoy

[dr bryan]

DAMN!

[DetailersDomain]

Thanks!

[Chestlock]

Very nice! Are those stone chips southeast of the gas tank door?

[DetailersDomain]

no sir it was quite windy, its dust

[Chestlock]

Phew! Love the LM-Rs too. I think they kinda make the disks look bigger with the lip. Looks great.

[DetailersDomain]

the wheels are a love it or hate it thing.

I do love them and from certain angles they look amazing and on some they look tiny, no worries working on another set of wheels right now.

[Chestlock]

No hate here. I'm struggling between them and the LMs right now (sorry LOU). And for some reason, VMR 701s keep popping into my head too.

[DetailersDomain]

anyone with shots of LM's on a B8?

[Chestlock]

http://www.audizine.com/forum/showthread.php/363088-Pic-request-19-quot-BBS-LM-or-reps Post #20

There's another pic here somewhere of a sepang (i think) B8. I'll try to find it.



http://www.audizine.com/forum/showthread.php/157444-some-quick-B8-S4-photoshops... Photoshop Thread

[DetailersDomain]

love the lm's but I think maybe the lm-r look a tad better.

maybe I should do the rgr.... need a winter set up.

[EvilllEmpirE]

saw this Beauty first hand yesterday.......and it is absolutely S-T-U-N-N-I-N-G

Every part is tastefully modded and done.....the LMR's are killer, Exhaust, Ride Height, MASSIVE Stoptechs, and even the Supercharged badge. It made me want to get a B8 S4 right then and there.....that's fer sure [drive]

[DetailersDomain]

thanks jackson good seeing you and your family yesterday!

[Chestlock]

RGRs look deadly even in 18s IMO - would be great for winters http://www.audizine.com/forum/showthread.php/370565-First-Quartz-Grey-with-Black-Pearl-Interior

Just not sure if I could handle the thought of them touching all that salt and grime [confused]


Now I'm thinkin about RGRs again........

[DetailersDomain]

I hear you on that but I would stick it with 19's already got snows from the RS6... I ran 19 inch snows on my CH's on the RS6. worked great!

[Chestlock]

Diamond black RGRs on Phantom = [drool]

[DetailersDomain]

I'm more of a silver person stay tuned.

[Un1k]

changing rims?

man but I gotta tell ya, When I see this thread being bumped, I hope for some sexy-ass pics.. and when I just see comments I get cranky haha

[DetailersDomain]

no wheels yet but the black /silver bbs caps are on now.

looks much better.
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7368.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_7365-1.jpg

[Un1k]

lookin good. I gotta be honest, I thought the wheels didn't look too good in the picture. But I saw those rims in person few days ago, and they look fantastic!

can you write a brief review about your pss10s please (the ride quality and overall quality of both modes)?

[DetailersDomain]

water pump went today, thank God it happened as I pulled into my driveway[>_<]

[NWS4Guy]

water pump went today, thank God it happened as I pulled into my driveway[>_<]

DOH! Didn't you see my thread?

[DetailersDomain]

I remember seeing something as well I knew there was a recall on some cars.

can you send me the link.

[NWS4Guy]

http://www.audizine.com/forum/showthread.php/388511-All-about-the-water-pump-issue

Has the recall VIN range in it, what RVU number to ask for and all. You might be outside the VIN range, in which case this wouldn't have saved you, but it might have.

[DetailersDomain]

so 8200 miles and the pump went, I'm just glad it was on my driveway and not last weekend when I was up in Boston.

Flat bed should be here in 30 minutes.

[DetailersDomain]

getting ready for the winter set up, it should be a good one.

[LYKUNO]

Diamond black RGRs on Phantom = [drool]

They're not bad on Jet Blue either!
http://content.glidesociety.com/image.aspx?id=35472ad2-c815-471d-bc63-62c342bdd572
http://content.glidesociety.com/image.aspx?id=4f1c8b50-4df6-4fb6-9e5b-63a6bea54cb2
http://content.glidesociety.com/image.aspx?id=d78eb886-741e-46fd-b397-781d195f2167

[DetailersDomain]

those won't clear my bbk.

I can tell you they are BBS and they will be 19's.

[richib86]

i know i know [wrench]

[DetailersDomain]

not sure I want to put them on just yet may wait a couple more weeks but I should have them today.

are you going to mount yours up Rich?

[Blake P]

those won't clear my bbk.

I can tell you they are BBS and they will be 19's.

The newly released 19" CH-R's? If so, did you go 8.5" or 9.5"?

[richib86]

i dont know how i feel about them in black, i may wait on silver to come in

[DetailersDomain]

i hear u

[DetailersDomain]

Got the wheels in for Winter.....
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_8529.jpg

BBS CX-R (et35) or BBS CH-R's (et40)
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_8538.jpg

http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_8527.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_8530.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_8534.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_8533.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_8537.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_8539.jpg

Hmmmmm

I'm set on the winter tires...Vredestein Wintrac 255 35 19, ran these on my 08 VW R32 and they were amazing!
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_8535.jpg

[Ynnekdude]

UGHHH those CX-Rs are soooo good looking. I plan on getting them next summer. Don't get them. I want to be unique![:D]

[DetailersDomain]

the CX-R's are what I originally ordered I'm probably going to stick with them as no one is running them here. and heck maybe I'll sell them to you after the winter ;)

[kuschmi]

Pretty fancy stuff for a winter setup. Both wheels will clear the BBK without spacers?

[DetailersDomain]

Not sure about the CH-R's but if I did them I would probably run 5mm spacers.

Again more than likely I'll run the CX-R's. I was thinking pick up LM's for winters but they won't clear the brakes. ; )

[Brooklyn]

Phil, are you carrying those Wintrac's or know a place online where I can find them in stock?

[DetailersDomain]

what size do you need I can get them.

[Brooklyn]

For the stock 19's. Is that a dedicated winter tire, or do they have a good all-season option? I'm south of you in DC and an all-season has been more than enough for me even during the snowmaggedon last year.

[DetailersDomain]

I used them all year for the r32 and loved them on the stock 18's.

[nick71692]

damn that is a nice setup for winter...Im jealous

[Brooklyn]

That sounds ideal Phil. I'll only be using them for winter, so if they worked year round for you that should do the trick. Shoot me a pm with a price when you get a chance. Didn't see them listed on your site.

[leviathan18]

we used in a leon the ch-r 19" and they didn't clear those exact same stoptechs we used 12mm spacers

[leviathan18]

http://img40.imageshack.us/img40/9380/01072009288.jpg
By leviathan18 (http://profile.imageshack.us/user/leviathan18) at 2009-07-07

[DetailersDomain]

Do you have another pic with the BBS CH-R's those look like the BBS CH to me.

[Blake P]

Do you have another pic with the BBS CH-R's those look like the BBS CH to me.

+1

[leviathan18]

hahahaha my bad those are the CH let me see if I have th R's installed in the car, I usually confuse them

[DetailersDomain]

Installed my Sprint Booster today...I was grinning for the rest of the day. LOL

Sprint Booster DSG - STronic (http://www.detailersdomain.com/sprintbooster-2-1-1-1.aspx)
Sprint Booster Manual (http://www.detailersdomain.com/sprintbooster-2-1.aspx)

[DetailersDomain]

my wintracs are mounted up on my new winter set up. BBS CX-R's 19x8.5 et35

http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9021.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9020.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9023.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9022.jpg

now on the car
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9033.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9045.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9041.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9035.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9032.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9030.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9029.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9038.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9037.jpg

my favorite shot
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9034.jpg

[DetailersDomain]

I also recently added the Sprint Booster. (http://www.detailersdomain.com/SPRINTBOOSTER-AUDI.aspx)

No more throttle lag

http://i46.photobucket.com/albums/f149/pyiu/1st%20gen%20iphone%208gb/IMG_9007.jpg
http://i46.photobucket.com/albums/f149/pyiu/1st%20gen%20iphone%208gb/IMG_9009.jpg

[A4rce1]

Wow - those look great! Nice!

[DetailersDomain]

thanks!

[rkdiddy]

I really like those rims, they look fantastic.

[DetailersDomain]

they do look great.

they have a more aggressive offset, I still like the LM-R's though.

but these are not too shabby for a winter set up.

[Deep Sea S4]

Blue x's?? Or is it just me.

[DetailersDomain]

I think just you.

[zillmc]

I might just have to get a set of those rims for Christmas.

[DetailersDomain]

hit me up I can get some good pricing :)

[Phrost]

Phil, since I live in WI my last 2 Audi's always get a ring of white "salt dust" around the floor mats that I can never get out with shampoo or scrubbing. Is there a good product I can buy or technique to remove a winter's worth of road salt from black carpet? I'd rather be proactive with the S4 than wait and have to be reactive [:(]

[DetailersDomain]

the rubber floor mats will help out big time.

you can use sonax upholstery carpet cleaner or even einszett deep cleaner.

[DetailersDomain]

to protect you can try the 303 fabric guard.

http://www.detailersdomain.com/303Products-hightechfabricguard32oz.aspx

[kuschmi]

Nice tire and wheel package, looks great on the car. Here's hoping we don't have to use them too much this winter.

[zcd2.7t]

Nice winter set up! I actually prefer them to your summer set up.

How do you like the Sprint Booster?

[primetime]

Phil, Rims looks great... Did you happen to weigh them? Very interested..... Thanks Ron

[DetailersDomain]

I would have to agree with that I hope we don't get to use them much.

I love the Sprint Booster for so little money its worth it. No more throttle lag.

I also picked one up for my Q7.

Ron I know for sure they are lighter than the stock wheels and heavier than the LM-R's but I didn't weigh them sorry.

[Phrost]

the rubber floor mats will help out big time.
you can use sonax upholstery carpet cleaner or even einszett deep cleaner.
to protect you can try the 303 fabric guard.
http://www.detailersdomain.com/303Products-hightechfabricguard32oz.aspx

Thank you very much! I have been using the Monster Mats in all of my cars, but I always get the salt deposits in a ring around them. I'll try out the products you suggested [up]

[K1speeder]

Nice wheel set up! Can you take some pics of the Spirit Booster in the car too. Or a mini walk through of the set up. How hard was it to install?

[DetailersDomain]

sure thing no problem.

the sprint booster it take about 10-15 minutes to install including the fact that they want you to leave the door open for 5 minutes before you install it.

you really won't be able to see it because its behind the bottom cover by the gas pedal.

but in short you take the connector off the gas pedal and add the sprint booster to it.

if you can plug a cord into the wall you should be able to do the Sprint Booster install :)

[K1speeder]

Awesome thanks. Is that the only performance upgrade you have so far?

[DetailersDomain]

I did the Pss10's, the stoptech 380mm kit.
the awe downpipe and exhaust. (non res)

[K1speeder]

I saw the suspension and brakes. Are you happy with the Stoptechs? Reduction of brake dust?

[DetailersDomain]

love the brakes. reduction of brake dust though will be easy just get Hawk HPS pads and that should help you out.

[Blake P]

love the brakes. reduction of brake dust though will be easy just get Hawk HPS pads and that should help you out.

Phil did you replace the rear pads/rotors as well? I dunno about you, but after I had the front BBK installed, the stock rear brakes dusted much more than the front. I replaced the rears with matching slotted rotors and PosiQuiet pads and now my wheels stay clean much longer![up]

[DetailersDomain]

i didn't change them yet, I will need to get the hawk hps for the rear soon. oem pads suck

[Blake P]

i didn't change them yet, I will need to get the hawk hps for the rear soon. oem pads suck

You might consider asking the guys over at StopTech what pads they recommend because I specifically remember them telling me that the semi-metallic compound of the Posi-Quiet rears matched the front kit I bought to provide consistent brake feel/balance.

[DetailersDomain]

send me the link please. thanks!

[Blake P]

send me the link please. thanks!

Sorry, there's no link. I purchased all parts directly from StopTech while I was at their headquarters so they could use my car for final testing of the 4 piston BBK. 50% discount...

[adbender]

my wintracs are mounted up on my new winter set up. BBS CX-R's 19x8.5 et35

http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9021.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9020.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9023.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9022.jpg

now on the car
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9033.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9045.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9041.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9035.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9032.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9030.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9029.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9038.jpg
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9037.jpg

my favorite shot
http://i46.photobucket.com/albums/f149/pyiu/2010%20Audi%20S4/IMG_9034.jpg

Best looking winter package I have seen....might have something to do with the 19s?

Nice work indeed.

[DetailersDomain]

I think its the offset...thanks!

[vdubjetta02]

I think those are hideous wheels...... but to each his own. If you have the money to buy BBS's as a winter wheel, you should have run the CH

[Okan509]

I think those are hideous wheels...... but to each his own. If you have the money to buy BBS's as a winter wheel, you should have run the CH

+1, but for the set-up it's pretty sick

[2PUTT]

i already asked santa if i can be like Phil...what a ballar!

[DetailersDomain]

I had CH's on just about all my Audi's it was time for a change I had a total of 6 sets....

[DetailersDomain]

some dirty pics
http://i46.photobucket.com/albums/f149/pyiu/1st%20gen%20iphone%208gb/2008%20cayenne/IMG_9307.jpg
http://i46.photobucket.com/albums/f149/pyiu/1st%20gen%20iphone%208gb/2008%20cayenne/IMG_9309.jpg
http://i46.photobucket.com/albums/f149/pyiu/1st%20gen%20iphone%208gb/2008%20cayenne/IMG_9310.jpg

[K1speeder]

now time for the clean pics?
I am very happy with the things I ordered by the way. Sonax works wonders on the brake dust

[DetailersDomain]

I hope I can get to it soon I have a lot of customers coming around now as the weather is breaking...FINALLY!

[Un1k]

^Nice- maybe we'll see more of your work at DB! :)

How's the stopping power on those stoptech? incredible??

[DetailersDomain]

yup you will see more work on DB as well as here.

the stoptechs are great!

[richib86]

my car needs some love phil... you know what that usually means haha.

[DetailersDomain]

I'm ready for it.

[DetailersDomain]

just installed the H&R Front and Rear Sways, I like how it handles now.

At first glance the sways don't look that much bigger maybe 20-30%. But they definitely weight more.

Thanks to Dion @ Drive Autoworks for getting me in and out quickly.

H&R Front and Rear Sways
http://i46.photobucket.com/albums/f149/pyiu/1st%20gen%20iphone%208gb/IMG_0567.jpg

Front sways - H&R with the 2 settings, I put them on Soft for now.
http://i46.photobucket.com/albums/f149/pyiu/1st%20gen%20iphone%208gb/IMG_0571.jpg

Stock rear on top
http://i46.photobucket.com/albums/f149/pyiu/1st%20gen%20iphone%208gb/IMG_0593.jpg
http://i46.photobucket.com/albums/f149/pyiu/1st%20gen%20iphone%208gb/IMG_0573.jpg

[primetime]

Phil, I just had mine installed as well... Haven't pushed the car to hard but it definetly has less body roll in the corners and grips very nicely... Nice mod IMO...

[DetailersDomain]

Very nice mod. I agree with you less body roll, more confident handling.

[DetailersDomain]

thinking of getting the resonated dp's from AWE.

[primetime]

thinking of getting the resonated dp's from AWE.

Nice! I like the sound of the AWE system... However, I really liked the Miltek so I went with their non-res with DP's... I just added 034 HFC's and it sounds very good plus added a nice power bump from the seat of the pants...

[Ynnekdude]

I cannot believe people don't find those CX-Rs attractive. I think they are gorgeous on your car. They have a sort of "RS4-esque" look to them but with a little flare. I am planning on getting my own set eventually.

[Un1k]

I cannot believe people don't find those CX-Rs attractive. I think they are gorgeous on your car. They have a sort of "RS4-esque" look to them but with a little flare. I am planning on getting my own set eventually.

Wha~? ppl don't like'em? lol they look great Phil.

I have my sways also, but not yet installed lol

installed my coils 5 days ago, so I'm trying to enjoy that first lol

did it sacrifice a lot of comfort?

[DetailersDomain]

Nice! I like the sound of the AWE system... However, I really liked the Miltek so I went with their non-res with DP's... I just added 034 HFC's and it sounds very good plus added a nice power bump from the seat of the pants...

I have the non res and they are just to loud for me, hopefully I can dig up my stock ones if not I guess I'll have to buy the Res DP's from AWE

[DetailersDomain]

I cannot believe people don't find those CX-Rs attractive. I think they are gorgeous on your car. They have a sort of "RS4-esque" look to them but with a little flare. I am planning on getting my own set eventually.

selling my CX-R's so hit me up when you are ready.

[DetailersDomain]

Wha~? ppl don't like'em? lol they look great Phil.

I have my sways also, but not yet installed lol

installed my coils 5 days ago, so I'm trying to enjoy that first lol

did it sacrifice a lot of comfort?

I didn't think they sacrificed too much but I have the PSS10's on for 8k miles and I moved them from 5 to 7 and now I have the sways. it cleaned up and tightened up the handling nicely.

[PsYkHoTiK]

The CX-Rs are definitely nice!

Still on the fence on if I should get them myself or not (thinking either that or getting a forged BBS set up).

On a side note, you guys ship fast! Placed an order last night before bed and got a shipping notice in the morning (just as I got up). I know we're on opposite coasts but that is FAST shipping right there!