Stern Adj. Upper Control arms coming soon!

[Mike@PureMS]

We're set to do some final testing of the Stern Adjustable upper Control arms in the next couple weeks. Fortunately we were able to use a number of components from the earlier b5/b6/B7 kits to really get this product to the market quick, and with minimal changes in pricing.

For those unfamiliar, these adjustable control arms replace all 4 upper arms. They are adjustable in length to allow custom changes to camber and caster for alignment purposes. They'll allow increasing the camber for better handling, or reducing camber to save tires.
They use the same quality componentry as their current B7 kit. rebuildable, sealed, and greased.

These are direct replacement arms for the stock front upper control arms. These utilize factory bushings to retain maximum road comfort and eliminate noise and harshness.

Custom outer ball joints feature Teflon linings and are sealed to provide years of maintenance free operation. Replaceable bushings and serviceable ball joints will make these the last arms you'll ever need!

Install is straight forward takes all less than an hour with the help of a lift, or a bit more using jack and stands.

Questions? Fire away!
http://www.purems.com/images/product-images/1231349346_7.jpg
http://www.cchanphotography.com/b8a4/adj_ctrl_arms/images/dsc_9291.jpg
http://www.cchanphotography.com/b8a4/adj_ctrl_arms/images/dsc_9321.jpg

[doctorheine]

do they come pre set-up or do you have to adjust them during install? Also how is the fine tuning done? im guessing you just turn the bolt?

[Mike@PureMS]

The come preset to the factory lengths.
To adjust you loosen the 2 jam nuts, and turn the adjuster nut in the center to lengthen or shorten the arm, then retighten the jam nuts.