PDA

View Full Version : s4 eaton tvs supercharger



mrbogangles
09-04-2009, 05:11 PM
thought it would be good info
looks like it uses the eaton R1320


SOUTHFIELD, Mich. … Diversified industrial manufacturer Eaton Corporation today announced that its Twin Vortices Series™ (TVS™) supercharger has been selected to power Audi’s 3.0 liter TFSI V6 engine available in the automaker’s new 2010 S4 and S4 Avant midsize class vehicles.

Eaton’s TVS supercharger compliments Audi’s redesigned 3.0 liter TFSI V6 engine, the newest member of the Audi V-engine family, with a quicker throttle response, delivering 333 horsepower, in addition to achieving an average fuel economy of 24 miles per gallon.

“Extensive tests of the V6 conducted by Audi engineers reveal the TVS supercharger provides optimal vehicle performance,” said Joao Faria, president of Eaton’s Powertrain and Specialty Controls Business. “When combined with direct injection, the TVS surpasses twin turbochargers in packaging, starting performance and responsiveness.”

The Eaton TVS is an all-new Roots-type positive displacement supercharger that features twin four-lobe rotors that are twisted 160-degrees. The intermeshing, high-speed rotor design pumps air directly into the engines intake system that when mixed with fuel creates more power. By comparison, the original Eaton supercharger features three lobes twisted 60 degrees. The fourth lobe and added twist, when combined with redesigned air inlet and outlet ports, creates a smooth, highly efficient flow of air into the engine and has improved noise and vibration characteristics.

http://www.autoblog.com/2008/07/18/eaton-tapped-to-produce-superchargers-for-audi/
http://www.eaton.com/EatonCom/Markets/Automotive/ProductsandSolutions/Superchargers/TVS/PerformanceMaps/index.htm

Obi_agent
09-04-2009, 05:44 PM
Nice thanks for sharing:D

AAAA
09-05-2009, 06:00 PM
now give more info on the slightly larger model that is supposed to be a direct replacement and fit in the s4!

Shomegrown
09-06-2009, 06:10 AM
thought it would be good info
looks like it uses the eaton R1050



No, it's the R1320, then it would be "good info". ;)

mrbogangles
09-06-2009, 01:40 PM
now give more info on the slightly larger model that is supposed to be a direct replacement and fit in the s4!

eaton tvs r1650 looks like an upgrade weather or not it will fit and be a direct bolt on have no clue
it look like it is being develop right know though
http://www.engine-expo.com/forum_2009/pdfs/day1/11_robert_walling.pdf


No, it's the R1320, then it would be "good info". ;)
fixed[up]

L0U
09-06-2009, 04:09 PM
a larger charger is not in the cards for street use. An upgrade from a more efficient one perhaps. 21psi is more than enough boost, and the flow is huge for a 3litre. The stock charger will give all that is needed before fuel delivery is maxxed out. Notice in the powerpoint, that a 2 litre with turbo made 10 less hp at higher boost than the charger. Pushing 21psi at 6000 rpm should be good for 450hp. (no pulley required)

ibiski
09-06-2009, 05:46 PM
The article you copied is from July '08. How is that news?

mrbogangles
09-06-2009, 08:46 PM
The article you copied is from July '08. How is that news?

it is just a reference and some info as to what type of supercharge it has
the article could have been in 2009
but it would still contain the same info as the previous
we all know it has a supercharger but for most people that is all they know and thats it